• 동아시아식생활학회지
• /
• 제8권2호
• /
• pp.126-136
• /
• 1998

This study was designed to determine the effects of linoleic acid contents and $\omega$ 6/$\omega$3 ratios on the induction of gastric ulcer by water immersion and restraint stress. Sprague-Dawley rats were fed 5diets containing 7% fat(w/w) for 6weeks. These diet groups were Lh, Mh, Hh, Mm, Ml, : 3 different linoleic acid levels(0.3% of energy(L). 3.5(M), 10(H) and 3 different $\omega$6/$\omega$3 ratios (11(1), 33(m), 100(h) with beef tallow, sunflower or fish oil. The Lh group showed a significantly higher ulcer index (UI) than the Mh and Hh groups(p<0.05). At the same linoleic levels, the UI had no significant difference within the $\omega$6/$\omega$3 ratios. The Mh group showed significantly higher (p<0.05) PGE2 and TBX2 content than any other group. Pearson's correlation coeffcients between UI and PGE2 and TBX2 had a negatively significant correlation(p<0.05). Linoleic acid of gastric mucosal phospholipids was reflected by the diet, but was not significantly different. The most significant finding of this study is that not only the absolute amount of linoleic acid, but also the $\omega$6/$\omega$3 ratios are important factors for the prevention of gastric ulcer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.388-393
• /
• 2004

Creep behavior of Ti had been studied in a stress from 9.8 to 29.4 MPa and temperature rang from 873K to 973K with a special reference to tertiary creep. It was found that stress exponent of Ti was larger than that of the general pure metal and the compound metal. The relationship between true strain and strain rate in tertiary creep was appeared as the equation, $ln{\dot{e}}$ = $ln{\dot{e}}_{0}$ + ${\Omega}$ e Also, Apparent activation energy of was appeared as 274.92kJ/mol by using the equation ${\dot{\varepsilon}}_{0}$ = A ${\sigma }_{0}^{\ast_0}$ exp$(-Q_{0}/RT)$

• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.57-62
• /
• 2014

미래형 유연소자 개발 시 비용감소 및 공정적합성 개선을 위해 동박을 잉크젯 프린팅법을 이용해 공중합체 유연기판 상 형성하고, 전기적 특성에 열처리 분위기가 미치는 영향을 확인하기 위해 3 종류의 환원분위기에서 열처리를 진행하여 보았다. 그 결과 200도의 낮은 온도에서 환원 특성이 뛰어난 포름산 분위기에서 전도체 수준의 비저항은 얻을 수 있었으나, 열처리 시 발생하는 응력으로 인해 발생된 표면균열에 기인해 그 값이 기존 동박에 비해 매우 높았다. 이에 비정질재료에서 응용되는 응력해소법을 응용하여 표면균열을 억제한 결과 230도 열처리 시 기존 열처리 방법에서는 $7.4{\mu}{\Omega}cm$의 비저항을 보이나, 응력해소를 통한 표면 균열이 억제된 시편에서는 $3.4{\mu}{\Omega}cm$의 비저항 값을 얻을 수 있었다. 특히 등온열처리에 의한 응력해소 효과를 확인하기 위해 동일 온도에서 등온시간 없이 열처리를 진행한 결과, 표면균열이 억제되지 못함을 확인할 수 있었다.

• 대한수학회지
• /
• 제34권1호
• /
• pp.87-118
• /
• 1997

This paper is concerned with a mixed Lagrangian formulation of the wiscous, stationary, incompressible Navier-Stokes equations $$ (1.1) -\nu\Delta u + (u \cdot \nabla)u + \nabla_p = f in \Omega $$ and $$ (1.2) \nubla \cdot u = 0 in \Omega $$ along with inhomogeneous Dirichlet boundary conditions on a portion of the boundary $$ (1.3) u = ^{0 on \Gamma_0 _{g on \Gamma_g, $$ where $\Omega$ is a bounded open domain in $R^d, d = 2 or 3$, or with a boundary $\Gamma = \partial\Omega$, which is composed of two disjoint parts $\Gamma_0$ and $\Gamma_g$.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.756-763
• /
• 2001

In the process of integrity evaluation for nuclear power plant components, a series of fracture mechanics evaluation on surface cracks in reactor pressure vessel(RPV) must be conducted. These fracture mechanics evaluation are based on stress intensity factor, K. However, under pressurized thermal shock(PTS) conditions, the combination of thermal and mechanical stress by steep temperature gradient and internal pressure causes considerably high tensile stress at the inside of RPV wall. Besides, the internal pressure during the normal operation produces high tensile stress at the RPV wall. As a result, cracks on inner surface of RPVs may experience elastic-plastic behavior which can be explained with J-integral. In such a case, however, J-integral may possibly lose its validity due to constraint effect. In this paper, in order to verify the suitability of J-integral, tow dimensional finite element analyses were applied for various surface cracks. A total of 18 crack geometries were analyzed, and $\Omega$ stresses were obtained by comparing resulting HRR stress distribution with corresponding actual stress distributions. In conclusion, HRR stress fields were found to overestimate the actual crack-tip stress field due to constraint effect.

• 산업기술연구
• /
• 제4권
• /
• pp.29-35
• /
• 1984

Buckling is a significant behavior to be considered whenever we design steel structures. In the case of H-shape beams, the lateral buckling occured by bending moment must be considered. Because of the lateral buckling of H-shape beams, the bending strength of the beams are determined by the lateral buckling stress instead of the allowable bending stress. Lateral buckling stress equation, consisting of two terms, i. e. ${\sigma}_{cr}({\nu},{\omega})={\sqrt{[{\sigma}_{cr}({\nu})]^2+[{\sigma}_{cr}({\omega})]^2}}$ has been using, but for the practical purpose of use the following equations are using two, i. e. ${\sigma}_{cr}({\nu})={\frac{0.65E}{{\ell}_h/A_f}}$, ${\sigma}_{cr}({\omega})={\frac{{\pi}^2E}{({\ell}_b/i_b)^2}}$. When we use the above equations, the results are different according to the shape of beam section, and they a re rather complex. In this study lateral buckling stress equation is derived, and the proposed formula$({\sigma}_{cr}(t))$ is compared with above mentioned two basic and practical equations. To verify the proposed formula experimentaly, 16H-shape beams which have different slender ratios arc tested by applying pure bending momet. Through the experiments the buckling behavior of H-shape beams is clarified, and the results shows that the proposed formula$({\sigma}_{cr}(t))$ is accurate enough for practical purpose.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2122-2129
• /
• 2002

Creep damage using a reference stress(RS) was analyzed for type 316LN stainless steel. The generalized K-R equation was reconstructed into the RS equation using a critical stress value $\sigma$. The RS equation was derived from the critical stress in failure time $t_f$ instead of material damage parameter $\omega$, which indicates the critical condition of collapse or approach to gross instability of materials during creep. For obtaining the reference stress, a series of creep tests and tensile tests were conducted with at 55$0^{\circ}C$ and $600^{\circ}C$. The stress-time data obtained from creep tests were applied to the RS equations to characterize the creep damage of type 316LN stainless steel. The value of creep constant r with stress levels was about 18 at 55$0^{\circ}C$ and 21 at $600^{\circ}C$. This value was almost similar with r = 24 in the K-R equation, which was obtained by using damage parameter $\omega$. Relationship plots of creep failure strain and life fraction $(t_f /t_r)$ were also obtained with different λ values. The RS equation was therefore more convenient than the generalized K-R equation, because the measuring process to quantify the damage parameter $\omega$ such as voids or micro cracks in crept materials was omitted. The RS method can be easily used by designers and plant operator as a creep design tool.

• Clinical and Experimental Reproductive Medicine
• /
• 제47권3호
• /
• pp.168-179
• /
• 2020

Objective: This study investigated testicular oxidative stress status and physiomorphological function in Wistar rats fed with yaji and cadmium chloride (CdCl₂). Methods: Sixty male albino Wistar rats (12 per group) were randomly assigned to five groups: group I (control), group II (300 mg/kg.bw of yaji), group III (500 mg/kg.bw of yaji), group IV (2.5 mg/kg.bw of CdCl₂), and group V (2.5 mg/kg.bw of yaji+4 mg/kg.bw omega-3). Each group was evenly subdivided into two subgroups and treatment was administered for 14 days and 42 days, respectively. Semen quality (sperm count, progressive motility, normal morphology, and gonadosomatic index), hormones (testosterone, follicle-stimulating hormone, and luteinizing hormone), testicular oxidative stress markers (superoxide dismutase, catalase, glutathione peroxidase, and malonaldehyde) and testicular histomorphological features were examined. Results: Yaji caused significant (p< 0.05) dose- and duration-dependent reductions in semen quality, the gonadosomatic index, testosterone, follicle-stimulating hormone, and luteinizing hormone. Yaji also caused significant (p< 0.05) dose- and duration-dependent decreases in superoxide dismutase, catalase, and glutathione peroxidase activity, as well as increased testicular malonaldehyde levels. Yaji induced distortions in the testicular histological architecture. CdCl₂ damaged testicular function by significantly (p< 0.05) reducing semen quality, reproductive hormone levels, and oxidative stress markers in albino Wistar rats. CdCl₂ also altered the histology of the testis. Conclusion: This study shows that yaji sauce has similar anti-fertility effects to those of CdCl₂, as it adversely interferes with male reproduction by impairing oxidative stress markers and the function and morphological features of the testis.

• Journal of Nutrition and Health
• /
• 제32권6호
• /
• pp.644-653
• /
• 1999

Background : Excessive intakes of $\omega$6 polyunsaturated fatty acid (PUFA) can increase oxidative stress, which may increase insulin resistance and could be the cause of metabolic syndrome X such as diabetes mellitus. One of the ways to reduce oxidative stress is the consumption of antioxidants such as vitamin E. It is controversial that vitamin E intakes may alleviate insulin resistance. The purpose of the study was whether high vitamin E intake may influence whole body glucose disposal rate(GDR), glycogen deposites, triglyceride content, lipid peroxide levels and antioxidant enzyme activities in Sprague Dawley rats fed high $\omega$6 PUFA diest. Methods : Sprague Dawley rats were divided into three groups. The control group consumed chow diet. High and low vitamin E groups consumed 40% PUFA of total energy intakes. One kilogram of diet mixture contained 300IU of $\alpha$-tocopherol in high vitamin E group, while it had 30 IU in low vitamin E group. Diets were given for 8 weeks. After 7 were of diet consumption, indwelling catheters were inserted in carotid artery and jugular vein of all rats so that GDR could be measured in awake and unstressed state. Results : Daily PUFA intakes were lower in the control group than others. Daily vitamin E intake of high vitamin E group was about ten times higher than those of low vitamin E group and the control group(p<0.0001). $\alpha$-tocopherol content in lier was highest in the high vitamin E group. GDR of the control group was 24% higher than others, and vitamin E intakes did not affect GDR. Glycogen deposit of liver in the control group was significantly higher than others, and it was not altered by vitamin E supplementation. Muscle glycogne content showed a similar tendency as liver glycogen in different diet groups. Triglyceride deposit in muscle was not different among groups. Lipid peroxide content of liver in the high vitamin E group was lower than the low of glutathione peroxidase were lowered in low vitamin E group than others, however, those of superoxide dismutase and catalase were not different. Conclusions : High vitamin E intakes can decrease oxidative stress in rats fed high (())-6 PUFA diet, but they cannot alleviate insulin resistance. Thus, increased oxidative stress through high (())-6 PUFA diet may be minimal for influencing insulin resistance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.819-822
• /
• 2006

This paper has the objects of deciding dynamic instability regions of thick plates on inhomogeneous Pasternak foundation by finite element method and providing kinematic design data for mats and slabs of building structures. In this paper, dynamic stability analysis of tapered opening thick plate is done by use of Serendipity finite element with 8 nodes considering shearing strain of plate. To verify this finite element method, buckling stress and natural frequencies of thick pate with or without in-plane stress are compared with existing solutions. The results are as follow that this finite element solutions with $4{\times}4$ meshes are shown the error of maximum 0.56% about existing solutions, and the larger foundation parameters, the farther dynamic instability regions are from vertical axis of graph presented relation of ${\beta}\;and\;\overline{\omega}/\omega$.