• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.87-90
• /
• 2003

B₂O₃침가에 따른 (Zn/sub 0.8.Mg/sub 0.2/)TiO₃계 세라믹스의 마이크로파 유전특성에 대하여 연구하였다. B₂O₃의 침가량에 비례하여 B₂O₃와 (Zn/sub 0.8.Mg/sub 0.2/)TiO₃와외 반응에 의한 TiO₂ 석출물의 양이 증가하며 공진주파수 온도계수가 증가하였다. 소결온도에 따라 액상의 양, 미세조직, TiO₂와 2차상의 석출거동이 상이하게 나타났다. 6.19mo1.％ B₂O₃물 첨가한 시편을 900℃에서 5시간 소결시 ε/sub r/ = 23.5, Q×f/sub o/ = 67,500 ㎓, T/sub f/ = -1.42 ppm/℃의 우수한 마이크로파 유전특성을 얻을 수 있었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.1
• /
• pp.29-34
• /
• 2006

The effects of $B_2O_3$ addition on the low-temperature sintering behavior and microwave dielectric properties of $(Zn_{0.8}Mg_{0.2})TiO_3$ ceramic system were investigated. Highly dense samples were obtained at the sintering temperatures below $900^{\circ}C$. The $Q{\times}f_o$ values were determined by the microstructures and sintering shrinkages which are affected by the amount of $B_2O_3$ and sintering temperature. Temperature coefficient of resonance frequency($T_f$) changes to a positive value with increasing the amount of $B_2O_3$ due to the increased amount of rutile phase which is one of the reaction products between $(Zn_{0.8}Mg_{0.2})TiO_3$ and $B_2O_3$. For $6.19 moi.{\%}B_2O_3$-added $(Zn_{0.8}Mg_{0.2})TiO_3$ system, it exhibits ${\epsilon}_r$ = 23.5, $Q{\times}f_o$ = 53,000 GHz, and $T_f$ = 0 ppm/$^{\circ}C$ when sintered at $900^{\circ}C$ for 5 h.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.561-565
• /
• 2002

The effects of sintering additives such as $Bi_2O_3$ and $V_2O_5$ on the microwave dielectric and sintering properties of (Zn, Mg)$TiO_3$ system were investigated. Highly dense samples were obtained for $(Zn_{0.8}Mg_{0.2})TiO_3$ at the sintering temperature range of $870{\sim}900^{\circ}C$ with $Bi_2O_3$ and $V_2O_5$ additions of <1wt.%, respectively. The microwave dielectric properties of $(Zn_{0.8}Mg_{0.2})TiO_3$ with 0.45 wt.% $Bi_2O_3$ and 0.55 wt.% $V_2O_5$ sintered at $900^{\circ}C$ were as follows: $Q{\times}f_o$=56,800 GHz, ${\varepsilon}_r$=22, and ${\tau}_f=-53ppm/^{\circ}C$. In order to improve temperature coefficient of resonant frequency, $TiO_2$ was added to the above system. The optimum amount of $TiO_2$ was 15 mol.% when sintered at $870^{\circ}C$, at which we could obtain following results: $Q{\times}f_o$ = 32,800 GHz, ${\varepsilon}_r$ = 26, and $\tau_f=0ppm/^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.321-324
• /
• 2003

The effects of various sintering additives such as $Bi_2O_3+V_2O_5$, $BiVO_4$, $B_2O_3$, and $CuO+V_2O_5$ on the low-temperature sintering and microwave dielectric properties of $(ZnMg)TiO_3$ system were studied. Sintering was enhanced by the sintering additives and highly dense samples were obtained for $(Zn_{0.8}Mg_{0.2})TiO_3$ at the sintering temperature of $910^{\circ}C$. $(Zn_{0.8}Mg_{0.2})TiO_3$ with 6.19 mol.%$B_2O_3$ was found to show the best sintering and microwave dielectric properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.282-286
• /
• 2003

We investigated the effects of calcination temperature and sintering additives on the sintering behaviors and microwave dielectric properties of $(Zn_{0.8}Mg_{0.2})TiO_3$. Highly densified samples were obtained at the sintering temperatures below $1000^{\circ}C$ with additions of 0.45 wt.% $Bi_2O_3$ and 0.55 wt.% $V_2O_5$. From the examination of the existing phases and microstructures before and after sintering of $(Zn_{0.8}Mg_{0.2})TiO_3$ system calcined at the various temperatures ranging from $800^{\circ}C$ to $1000^{\circ}C$, it was found that high $Q{\times}f_o$ values were obtained when unreacted or second phases in calcined body were reduced. When calcined at $1000^{\circ}C$ and sintered at $900^{\circ}C$, it consists of hexagonal as a main phase with uniform microstructure and exhibits $Q{\times}f_o$ value of 42,000 GHz and dielectric constant of 22.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.12
• /
• pp.1017-1024
• /
• 2000

Effect of the microwave dielectric properties and the microstructure on a mole fraction(x=0.1~0.9) of (1-x)Mg$_2$SiO$_4$-xZnAl$_2$O$_4$ ceramics was investigated. When (1-x)Mg$_2$SiO$_4$-xZnAl$_2$O$_4$(x=0.1~0.9) ceramics were sintered at 130$0^{\circ}C$, 135$0^{\circ}C$ and 140$0^{\circ}C$ for 2hr, the microwave dielectric properties were obtained $\varepsilon$r=6.8~8.3, Q.f$_{0}$=36000~77600. On the other hand, the temperature coefficients of resonant frequency($\tau$$_{f}$) were obtained in the properties of -62ppm/$^{\circ}C$ to -49ppm/$^{\circ}C$. In order to adjust the temperature coefficient of resonant frequency($\tau$$_{f}$), CaTiO$_3$was added in (1-x)Mg$_2$SiO$_4$-xZnAl$_2$O$_4$ceramics. 0.7Mg$_2$SiO$_4$-0.2ZnAl$_2$O$_4$-0.1CaTiO$_3$ceramics sintered at 135$0^{\circ}C$ for 2hr showed the excellent microwave dielectric properties of $\varepsilon$r=7.7, Q.f$_{0}$=32000, and $\tau$$_{f}$=-7.9 ppm/$^{\circ}C$.EX>.>.EX>.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.677-680
• /
• 2003

The effect of $B_2O_3$ addition on the sintering behavior and microwave dielectric properties of $(Zn_{0.8}Mg_{0.2})TiO_3$ ceramic system were investigated. Highly dense samples were obtained at the sintering temperatures below $900^{\circ}C$. Temperature coefficient of resonance frequency(${\tau}_f$) changes to a positive value with increasing the amount of $B_2O_3$ because of the increased amount of rutile phase. The $Q{\times}f_o$ values were determined by the microstructures and sintering shrinkages which are affected by the rutile or second phase. When 6.19 mol.% of $B_2O_3$ added and sintered at $900^{\circ}C$ for 5h, it exhibits ${\epsilon}_r$ =23.5, $Q{\times}f_o$= 67,500 GHz, and ${\tau}f=-1.42ppm/^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.7
• /
• pp.604-610
• /
• 2003

The effects of sintering additives such as B $i_2$ $O_3$ and $V_2$ $O_{5}$ on the microwave dielectric and sintering properties of (Z $n_1$$_{-xM}$ $g_{x}$)Ti $O_3$ system were investigated. Highly dense samples were obtained for (Z $n_{0.8}$M $g_{0.2}$)Ti $O_3$ at the sintering temperature range of 870~90$0^{\circ}C$ with B $i_2$ $O_3$ and $V_2$ $O_{5}$ additions of 〈1 wt.%, respectively. The microwave dielectric properties of (Z $n_{0.8}$M $g_{0.2}$)Ti $O_3$ with 0.45 wt.%B $i_2$ $O_3$ and 0.55 wt.% $V_2$ $O_{5}$ sintered at 90$0^{\circ}C$ were as follows : Q$\times$ $f_{o}$ = 50,800 GHz, $\varepsilon$$_{r}$ = 22, and $\tau$$_{f}$ = -53 ppm/$^{\circ}C$. In order to improve temperature coefficient of resonant frequency, Ti $O_2$ was added to the above system. The optimum amount of Ti $O_2$ was 15 moi.% when sintered at 87$0^{\circ}C$, at which we could obtain following results: Q$\times$ $f_{o}$ = 32,800 GHz, $\varepsilon$$_{r}$ = 26, and$\tau$$_{f}$ = 0 ppm/$^{\circ}C$.EX>.EX>.EX>.EX>.EX>.EX>.EX>.

• Proceedings of the KAIS Fall Conference
• /
• 2003.06a
• /
• pp.91-94
• /
• 2003

하소온도에 따른 (Zn/sub 0.8.Mg/sub 0.2/)TiO₃ 마이크로파 유전체 세라믹스의 소결거동과 마이크로파 유전특성의 변화를 연구하였다. 저온소결을 위하여 0.45 wt.％Bi₂O₃와 0.55wt.％V₂O/sub 5/를 첨가하였으며, 1000℃이하의 온도에서 소결하여 치밀한 소결체를 얻을 수 있었다. 800℃～1000℃의 범위의 여러 온도에서 하소를 하고 소결 전ㆍ후의 존재상과 미세구조의 분석을 통하여, 하소한 분말에 존재하는 미반응상 및 이차상이 최소화 될 때 높은 Q×f/sub o/값을 갖는 것을 알 수 있었다. 1000℃에서 하소한 후 900℃에서 소결했을 때, 주상이 Hexagonal이고 미세구조가 균일하였으며, 이때 Q×f/sub o/ = 42,000㎓, ε/sub r/ = 22를 나타냈다.

• Journal of the Korean Ceramic Society
• /
• v.32 no.8
• /
• pp.938-944
• /
• 1995

Dielectric properties and the stabilization of perovskite phase for the (1-y)Pb(Mg(1-x)/3Znx/3Znx/3Nb2/3)O3-yBaTiO3 ((1-y)PM1-xZxN-yBT) ceramics have been investigated as a function of amount of x and y. In the (1-y)PM0.6Z0.4N-yBT ceramics, the amount of pyrochlore phae was decreased by the addition of 2 mol% BT and the dielectric constant was increased. However, the dielectric constant decreased with further addition of BT even though pyrochlore phase was decreased. Dielectric prooperties in (1-y)PM0.6Z0.4N-yBT ceracmis were affected by the character of the BT rather than the amount of pyrochlore phase. The phase transitions were broadened and phase transition temperatures were lowered by the increase of BT contents.