• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.14-14
• /
• 2003

Silicon carbide (SiC)는 높은 power 영역과 높은 온도영역에서도 작동 가능한 우수한 반도체 물질이다. 또한 우수한 열적 화학적, 안정성을 가지고 있어 가흑한 조건에서의 소자로써도 사용 가능하다. 현재 SiC 적용분야로는 우수한 전기적, 기계적 성질을 이용한 미세소자(MEMS)와 GaN 와 거의 유사한 격자상수를 가지는 것을 이용한 GaN epitaxial 성장의 기판으로도 사용되어진다. 그러나 SiC 는 기존의 습식식각 용매에 대해 화학적 안정성을 가지고 있기 때문에 전자소자의 제작에 있어서 플라즈마를 이용한 건식식각의 중요성이 대두되어지고 있다. 소자제작에 있어 이러한 건식식각시 식각 단면의 제어, 이온에 의한 낮은 손상 정도, 매끄러운 식각 표면, 그리고 고속의 식각 속도둥이 요구되어진다. 본 실험에서는 식각 속도의 증가와 수직한 식각 단면둥을 획득하기 위하여 SF6 플라즈마에서 Source power, dc bias voltage, 그리고 외부에서 인가되는 자속의 세기를 변화시쳐가며 식각 속도, 식각 마스크와의 식각 션택비, 식각 단면둥과 같은 SiC 의 식각 특성을 관찰하였다. 식각 후 식각 단면은 주사전자 현미경(SEM)을 통해 관찰하였다. 본 실험에서의 가장 높은 식각 속도는 분당 1850n 로써 이때의 공정조건은 1400W 의 inductive power, -600V 의 dc bias voltage, 20G 의 외부자속 세기이었다. 또한, 높은 inductive power 조건과 낮은 dc bias voltage 조건에서 Cu는 $SF_6$ 플라즈마 내에서 식각부산물의 증착으로 인해 SiC 와 무한대의 식각선택비를 보였다. 이러한 Cu 마스크를 사용한 SiC 의 식각에서는 식각 후 수직한 식각 단변을 관찰할 수 있었다. 것올 알 수 있다. 따라서, 기존의 pve 보다 세라믹 기판의 경우가 수분 흡수율이 높아 더 오랫동안 전류를 흐르게 하여 방식성이 개선된 것으로 판단된다.을 통해 경도가 증가한 시편의 경우 석출상의 크기가 5nm 이하로 매우 작고 대체로 기지와 연속적인 계면을 형성하나, 열처리가 진행될수록 석 출상의 크기가 커지고 임계크기 이상에 이르면 연속적인 계면은 거의 발견되지 않고, 대부 분 불연속적이고 확연한 계면을 형성함을 관찰 할 수 있었다. 알루미나(${\alpha}-Al_2O_3$) 기판 위에 증착한 $(Ti_{1-x}AI_{x})N$ 피막은 마찬가지로 (200) 우선 방위를 나타내었으나, 그 입자의 크기가 수십 nm로 고속도강위에 증착한 피막에 비해 상당히 크게 형성되었다. 또한 열처리 후에 AIN의 석출이 진행됨에도 불구하고 경도 증가는 나타나지 않고, 열처리가 진행됨에 따라 경도가 감소하는 양상만을 나타내었다. 결국 $(Ti_{1-x}AI_{x})N$ 피막이 열처리 전후에 보아는 기계적 특성의 변화 양상은 열역학적으로 안정한 Wurzite-AlN의 석출에 따른 것으로 AlN 석출상의 크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.624-631
• /
• 1993

The composites in the system aluminium titanate-mullite were synthesized by stepwise alkoxide hydrolysis of tetraethylorthosilicate, Si(OCLH5), and titaniumtetraethoxide, $Ti(OC_{2}H_{5})_4$ in $Al_{2}O_{3}$ ethanolic colloidal solution. All particles produced by sol-gel-process were amorphous, monodispesed and had a narrow particle size distribution. Sintered bodies at $1600 ^{\circ}C$ for 2h were subjected to prolonged durability tests-on the one hand annealing at the critical decomposition temperature of $1100 ^{\circ}C$ for lOOh and on the other cyclic thermal shock between 750 and $1400 ^{\circ}C$ for 100h. The best thermal durability was achieved by a composition containing 70 and 80 vol% aluminium titanate, which showed little change in microstructure and thermal expansion cycles during the tests. The microstructural degradation of samples studied using scanning electron microscopy, X-ray diffraction, and dilatometry, was presented here. The study was conducted in order to predict the service life of aluminium titanate-mullite ceramics formed by this processing route.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.4
• /
• pp.202-208
• /
• 2001

In Recent results suggested that doping $Ta_2O_5$ with a small amount of $TiO_2$ using standard ceramic processing techniques can increase the dielectric constant of $Ta_2O_5$ significantly. In this paper, this concept is studied using RTCVD (Rapid Thermal Chemical Vapor Deposition). Ti-doped $Ta_2O_5$ films are deposited using $TaC_{12}H_{30}O_5N$, $C_8H_{24}N_4Ti$, and $O_2$ on both Si and $NH_3$-nitrided Si substrates. An $NH_3$-based interface layer at the Si surface is used to prevent interfacial oxidation during the CVD process and post deposition annealing is performed in $H_2/O_2$ ambient to improve film quality and reduce leakage current. A sputtered TiN layer is used as a diffusion barrier between the Al gate electrode and the $TaTi_xO_y$ dielectric. XPS analyses confirm the formation of a ($Ta_2O_5)_{1-x}(TiO_2)_x$ composite oxide. A high quality $TaTi_xO_y$ gate stack with EOT (Equivalent Oxide Thickness) of $7{\AA}$ and leakage current $Jg=O.5A/textrm{cm}^2$ @ Vg=-1.0V has been achieved. We have also succeeded in forming a $TaTi_x/O_y$ composite oxide by rapid thermal oxidation of the as-deposited CVD TaTi films. The electrical properties and Jg-EOT characteristics of these composite oxides are remarkably similar to that of RTCVD $Ta_2O_5, suggesting that the dielectric constant of $Ta_2O_5$ is not affected by the addition of $TiO_2$.

• Journal of the Korean Ceramic Society
• /
• v.42 no.8 s.279
• /
• pp.532-536
• /
• 2005

Thermal shock resistance of structural ceramics is a property that is difficult to quantity, and as such is usually expressed in terms of a number of empirical resistance parameters. These are dependant on the conditions imposed, but one method that can be used is the examination of density, Young's modulus and thermal expansion retention after quenching. For high temperature applications, long-annealing thermal durability, cycle thermal stability and residual mechanical properties are very important if these materials are to be used between $1000^{\circ}C$ and $1300^{\circ}C$. In this study, an excellent thermal shock-resistant material based on $Al_2TiO_5-mullite$ composites of various compositions was fabricated by sintering reaction from the individual oxides and adjusting the composition of $Al_2O_3TiO_2/SiO_2$ ratios. The characterization of the damage induced by thermal shock was done by measuring the evolution of the Young's modulus using ultrasonic analysis, density and thermal expansion coefficients.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.415-420
• /
• 2008

AAO films were fabricated on two kinds of substrates such as $Al/SiO_2/Si$ and Al/Ni/Ti/Si. To obtain well-aligned AAO film, we optimized process condition for buffer layer, electrolyte and voltage. In the case of oxalic acid, the AAO film with pore size of approximately 45 nm was obtained at voltage of 40 V, temperature of $10^{\circ}C$, oxalic acid of 0.3 M and widening time of 60 min. Then the thickness of barrier is less than 600 nm. In the case of sulfuric acid, the AAO film has pore size of 40 nm and barrier thickness of 400 nm with optimum conditions such as voltage of 25 V, temperature of $8^{\circ}C$, sulfuric acid of 0.3 M and widening time of 60 min.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.684-693
• /
• 2005

Statement of problem: Ti-6Al-7Nb alloy is used instead of Ti-6Al-4V alloy that was known to have toxicity. Purpose: This study was performed to investigate the effect of electrolyte concentration on the surface characteristics of anodized and hydrothermally-treated Ti-6Al-7Nb alloy Materials and methods: Discs of Ti-6Al-7Nb alloy of 20 mm in diameter and 2 mm in thickness were polished sequentially from #300 to 1,000 SiC paper ultrasonically washed with acetone and distilled water for 5 min, and dried in an oven at $50^{\circ}C$ for 24 hours. Anodizing was performed at current density $30mA/cm^2$ up to 300 V in electrolyte solutions containing $\beta-glycerophosphate$ disodium salt hydrate $(\beta-GP)$ and calcium acetate (CA). Hydrothermal treatment was conducted by high pressure steam at $300^{\circ}C$ for 2 hours using a autoclave. All samples were soaked in the Hanks' solution with pH 7.4 at $36.5^{\circ}C$ for 30 days. Results and conclusion: The results obtained were summarized as follows: 1. After hydrothermal treatment, the precipitated HA crystals showed the dense fine needle shape. However, with increasing the concentration of electrolyte they showed the shape of thick and short rod. 2. When the dense fine needle shape crystals was appeared after hydrothermal treatment, the precipitation of HA crystals in Hanks' solution was highly accelerated. 3. The crystal structures of $TiO_2$ in anodic oxide film were composed of strong anatase peak and weak rutile peak as analyzed with thin-film X-ray diffractometery. 4. The Ca/P ratio of the precipitated HA layer was equivalent to that of HA crystal in Hanks' solution.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.87-87
• /
• 1999

본 연구에서는 Pulsed Laser Deposition(이하 PDL)방법을 이용하여 Si기판에 (Ba,Sr)TiO3(이하 BST)박막을 MFS-FET(Metal-Ferroelectric-Semiconductor Field-effect Transistor)구조로 제조하였으며 BST박막의 강유전성이 BST 박막에 유도되는 응력에 어떤 영향을 받는지 살펴보았다. 본 연구에서는 완충막을 사용함으로써 BST박막과 완충막간의 격자부정합을 이용하여 BST박막에 강유전성을 유도하려고 하였다. 또한 MFS-FET구조의 BST박막에 유도되는 응력조절을 위하여 BST박막과 완충막의 두께를 변화하였으며 XRD를 통한 구조 분석 및 C-V test를 통한 전기적 특성을 관찰을 하였다. PLD법을 통해서 epitaxial 성장된 BST 박막에서는 Si에 epitaxial 성장된 완충막과의 격자부정합에 의한 BST박막내의 자발분극의 발생이 예상된다. 따라서, 본 연구는 강유전체의 자발분극에 의하여 발생되는 C-V 이력현상이 BST박막과 완충막과의 격자부정합에 의한 응력에 의해 발생될 것으로 예상하여, BST 박막에 유도되는 응력과 C-V 이력현상의 관계를 통하여 상온에서 상유전성을 갖는 BST가 응력에 의하여 어느 정도의 강유전성을 나타내는지를 밝히기 위해 진행되었다. 본 연구에서 사용된 완충막은 YSZ(Yttria Stabilized Zirconia)박막으로 0.4mTorrO2 분위기 하에서 600~80$0^{\circ}C$의 온도에서 증착하여 상형성을 살펴보았고 $700^{\circ}C$에서 epitaxial 성장을 확인하였으며 두께는 30~$\AA$으로 변화하였다. 또한 BST박막은 완충막과의 전압분배를 고려해 300~2000$\AA$으로 두께를 변화를 시키며 증착하였다. MFS 구조에서 Al 전극을 사용하여 완충막과 BST박막간의 두께 변화에 따른 Capacitance - Voltage(C-V) 측정을 하였으며 이를 통하여 강유전상의 특성인 C-V 이력현상을 관찰하였다. 그 결과 YSZ 박막에서는 C-V 이력현상이 나타나지 않았으며 BST 박막에서는 약 1.2V의 C-V이력현상이 보였다.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.611-619
• /
• 1994

The formation of , $\beta$-quartz solid solution in the $LiO_2-Al_2O_3-SiO_2$glasses containing $TiO_{2}$ and $ZrO_{2}$ as nucleating agents was investigated for various temperatures and times. Linear thermal expansion coefficients of base glasses and crystallized glasses were $45\sim 55 \times 10^{-7} \textrm{cm}/^{\circ}C$ and $ -8\sim +8 \times 10^{-7}\textrm{cm}/^{\circ}C$ ($25^{\circ}C \sim 525^{\circ}C$), respectively. The crystal phase formed by heat-treatment below $900^{\circ}C$was , $\beta$--quartz solid solution, and the crystal sizes were less than 0.21m. On the other hand, the crystal size of the base glasses containing 3.5 wt% MgO is relatively uniform and is independent with temperature. The specimen containing 3.5 wt% ZnO shows a minimum crystal size(O.l8$\mu \textrm{m}$), and it strongly depends on temperature of heat-treatment.

• Journal of Surface Science and Engineering
• /
• v.27 no.2
• /
• pp.99-108
• /
• 1994

Films of glass-ceramics $Li_2O-Al_2O_3-SiO_2$(LAS)system were prepared on substrate of an iron plate(SCP) by sol-gel technique using metal alkoxide such as Si$(OC_2H_5)_4$,Al$(OC_2H_9)_3$) and Ti$(OC_2H_6)_4$). Sol which was made by means of simple spray coating, on the substrate was hydrolyzed at 75~$80^{\circ}C$ in moisture cabinet (80~90 % humidity) to form the multicomponent gel. The films up to about 0.8~1.0$mu extrm{m}$ in thickness can be obtained by repeating operation, spraylongrightarrowhydrolysis and condensationlongrightarrowdryinglongrightarrowheating and crystallization at $700^{\circ}C$ for 3~5min. The far-infrared radiation spectra of the coated films on substrate were examined by FT-IR and of films was also observed by scanning electron micrograph technique. The thermal evaluation of the gel-film is followed by TG/DTA measurements. The structure evaluation is followedd X-ray diffraction. These results suggest that this process is applicable to far-infrared radiat at thin film technique.

• 보존과학연구
• /
• s.26
• /
• pp.165-188
• /
• 2005

From the ancient to these days, there have been used many kinds of pigment which have two types that are inorganic pigment and organic pigment. At the ancient times, natural pigment had been used but the artificially mixed pigment has been used in modern times. By the way, searching for studies has been studied recently, it would be said the ancient pigments such as Danchung, Wall painting and Mural painting are the mainthema. However, studies about the pigments used in modern pictured relics have rarely can be found. Therefore, this analysis of Ilweolokdo would be important at the point of the pigments used in pictures of royal family in modern times and the results can be briefly summarized as below; Firstly, the results of qualitative analysis of the pigments that base or all pigments of picture was detected components of Ca, Fe and As, this results meaning that picture was used filler and basic paint. Secondly, a result of the analysis on the composition elements of the pigments shows that the main components in their composition are ;White - Lead Cyanamide($2PbCO_3$.$Pb(OH)_2$) or Titanium Oxide($TiO_2$)Blue - Ultramarine($2(Na_2O$.$Al_2O_3$ .$2Si_O2$).$Na_2S_2$)Green - Emerald green($C_2H_3A_s3Cu_2O_8$)Gold - Gold(Au), Red-Red Lead($Pb_3O_4$) or Cinnabar(HgS)Black - Carbon(C)Thirdly, X-ray diffraction analysis of crystalline structure for the blue and green pigment peeling off in picture shows that the components of blue pigment is Ultramarine($2(Na_2O$.$Al_2O_3$ .$2Si_O2$).$Na_2S_2$) and green pigment is Emerald green($C_2H_3A_s3Cu_2O_8$). Especially, microcrystalline structure of the green pigment was the shape like a cross section of wood. Consequently, we knew through the analysis of qualitative and microcrystallinestructures seen on the cross section of analyzed pigments layer that the all pigments used in the Ilweoloakdo is possible to use synthetic pigments in modern.