• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.548-556
• /
• 2021

This study was conducted to investigate the applicability of lignocellulosic fiber and coconut shell activated carbon (CSA) for the production of a particulate matter (PM)-reducing air-filter as raw materials to solve the environmental problems of non-woven fabrics. CSA had a good potential to use as a raw material of air-filter for reducing volatile organic compounds as well as noxious metals, and reduction capability of the CSA was 5 times higher than that of wood fiber. Natural adhesives formulated with proteinaceous wastes mostly were applied successfully to fabricate air-filters with the shape of fiberboard. The air-filter fabricated with the minimum target density of 200 kg/m³ and the maximum CSA-content of 40 wt% in fiberboard had a good manageable strength. However, the fiberboard filters was required to make vent-holes for improving an air-permeability of the filters. Size of the CSA particles was adjusted to greater than 2 mesh with the consideration of strength and formability of the fiberboard. Three-layers fiberboard that only wood fiber and the mixture of wood fiber and CSA were formed in the surface and middle layers, respectively, was determined to the optimal condition for the production of air-filters. In addition, traditional Korean paper handmade from mulberry trees (TKP) showed a good PM-reducing property as an air-filter. It is concluded that air-filtering set composed of fiberboard with vent-holes and TKP instead of conventional air-filters made with non-woven fabrics can be used as a filter for reducing the concentrations of PM, VOC and noxious metals existed in indoor and outdoor spaces.

• Cross-Cultural Studies
• /
• v.48
• /
• pp.289-323
• /
• 2017

L'Espoir, a novel by Andre Malraux, contains traits of the genre of literacy reportage that depicts the full account of the Spanish Civil War as non-fiction based on his personal experience of participating in war; the novel has been dramatized into a semi-documentary film that corresponds to reportage literature. A semi-documentary film is the genre of film that pursues realistic illustration of social incidents or phenomenon. Despite difference in types of genre of the novel and the film L'Espoir, such creative activities deserve close relevance and considerable narrative connectivity. Therefore, $G{\acute{e}}rard$ Genette's narrative discourse of novel and film based on narrative theory carries value of research. Every kind of story, in a narrative message, has duplicate times in which story time and discourse time are different. This is because, in a narrative message, one event may occur before or later than another, told lengthily or concisely, and aroused once or repeatedly. Accordingly, analyzing differing timeliness of the actual event occurring and of recording that event is in terms of order, duration, and frequency. Since timeliness of order, duration, and frequency indicates dramatic pace that controls the passage of a story, it appears as an editorial notion in the novel and the film L'Espoir. It is an aesthetic discourse raising curiosity and shock, the correspondence of time in arranging, summarizing, deleting the story. In addition, Genette mentions notions of speech and voice to clearly distinguish position and focalization of a narrator or a speaker in text. The necessity to discriminate 'who speaks' and 'who sees' comes from difference in views of the narrator of text and the text. The matter of 'who speaks' is about who portrays narrator of the story. However, 'who sees' is related to from whose stance the story is being narrated. In the novel L'Espoir, change of focalization was ushered through zero focalization and internal focalization, and pertains to the multicamera in the film. Also, the frame story was commonly taken as metadiegetic type of voice in both film and novel of L'Espoir. In sum, narrative discourse in the novel and the film L'Espoir is the dimension of story communication among text, the narrator, and recipient.

• Clean Technology
• /
• v.25 no.1
• /
• pp.91-97
• /
• 2019

Oxidative desulfurization (ODS) has received much attention in recent years because refractory sulfur compounds such as dibenzothiophenes can be oxidized selectively to their corresponding sulfoxides and sulfones, and these products can be removed by extraction and adsorption. In this work, The oxidative desulfurization of marine diesel fuel was performed in a batch reactor with hydrogen peroxide ($H_2O_2$) in the presence of various supported heteropoly acid catalysts. The catalysts were characterized by XRD, XRF, XPS and nitrogen adsorption isotherm techniques. Based on the sulfur removal efficiency of promising silica supported heteropoly acid catalysts, the ranking of catalytic activity was: $30\;H_3PW_{12}/SiO_2$ > $30\;H_3PMo_{12}/SiO_2$ > $30\;H_4SiW_{12}/SiO_2$, which appears to be related with their intrinsic acid strength. The $30\;H_3PW_{12}/SiO_2$ catalyst showed the highest initial sulfur removal efficiency of about 66% under reaction conditions of $30^{\circ}C$, $0.025g\;mL^{-1}$ (cat./oil), 1 h reaction time. However, through the recycle test of the $H_3PW_{12}/SiO_2$ catalyst, significant deactivation was observed, which was attributed to the elution of the active component $H_3PW_{12}$. By introducing cesium cation ($Cs^+$) into the $H_3PW_{12}/SiO_2$ catalyst, the stability of the catalyst was improved with changing the solubility, and the $Cs^+$ ion exchanged catalyst could be recycled for at least five times without severe elution.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.84-107
• /
• 2018

Cheommojik is a pile cloth, a type of textile whose surface is covered with short piles. The term chaedam was used during the late Joseon dynasty to refer to pile cloth rugs, while the terms yoongjeon, dantong and yangtanja were used in the early twentieth century. Various documents, newspaper articles and photographs confirm that pile cloth rugs were used by the general public as well as the royal family from the late Joseon dynasty onward, and that there were domestic manufacturers of such rugs at that time. This study investigated six pile cloth rugs that were produced after the late Joseon dynasty, five of which feature Persian knots made of cut pile, the other being made with the loop pile method. The cut pile rugs are rectangular in shape and measure between 72-98cm by 150-156cm; and they are decorated in the middle with patterns of butterfly, deer, and tiger or the ten longevity symbols, and along the edges with patterns composed of 卍 symbols. The ground warp of all six rugs are made from cotton yarn, while the ground weft is made of cotton yarn on three pieces, wool on one piece and cotton and viscose rayon. The ground weft yarn from four pieces are Z-twist yarn made with two or more S-twist cotton yarn. Four to six colors were used for the pile weft, all being natural colors except for red. Two or more S- or Z-twist yarn were twisted together in the opposite twist for the pile weft, with the thickness determining the number of threads used. Six or more weft threads were used to make the start and end points of the rug; and the ground warp ends were arranged by tying every four of them together. For the left and right edges, three or more threads were wrapped together into a round stick-like form, and the second and third inner ground warps from the edges were stitched on to the wrapped edge. For the loop pile, loops were made in the direction of the warp; the ground warp and the ground weft may have been made with cotton, the pile warp with wool yarn. An analysis of the components of three rugs was conducted to determine which types of animal hair were used for the pile weft. Despite some inconclusive results, it was revealed that goat hair and fat-tailed sheep hair were used, raising the possibility that various kinds of animal fur were used in the production of pile cloth rugs. The six rugs examined in this study are estimated to have been made between the late 1800s and the early 1900s. Although the manufacturer of the rugs cannot be confirmed, we concluded that the rugs were produced in Korea after referring to the documentation of the domestic production of pile cloth rugs during the aforementioned period and the form and placements of the patterns on the rugs.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.4
• /
• pp.217-223
• /
• 2018

This study was conducted to investigate the effect of seeding dates on grassland productivity and botanical composition in oversown hilly pasture located in Pyeongchang of South Korea. Four treatment groups were established based on the seeding dates of grass mixture: T1, August 13; T2, August 27; T3, September 10; and T4, September 24. Evaluation of seasonal changes in grass botanical composition revealed the highest ratios of grass in T1 and T2 (81-100% grass) and the lowest in T4 (46-90 % grass). In the plant length, the first harvest time was longer than other cutting times and last harvest time was the lowest. The total dry matter yield of grass was highest in T2 ($9,042kg\;ha^{-1}$) and T1 ($8,845kg\;ha^{-1}$) and lowest in T4 ($5,086kg\;ha^{-1}$). The findings of the present study suggest that seeding by late August provide the most desirable results for vegetation and grassland productivity in oversown hilly pasture, Pyeongchang of South Korea.

• Science of Emotion and Sensibility
• /
• v.21 no.4
• /
• pp.63-76
• /
• 2018

The purpose of this study was to investigate the effect of contact type textile electrode structure on heart activity signal acquisition for smart healthcare. In this study, we devised six contact type textile electrodes whose electrode size and configuration were manipulated for measuring heart activity signals using computerized embroidery. We detected heart activity signals using a modified lead II and by attaching each textile electrode to the chest band in four healthy male subjects in a standing static posture. We measured the signals four times repeatedly for all types of electrodes. The heart activity signals were sampled at 1 kHz using a BIOPAC ECG100, and the detected original signals were filtered through a band-pass filter. To compare the performance of heart activity signal acquisition among the different structures of the textile electrodes, we conducted a qualitative analysis using signal waveform and size as parameters. In addition, we performed a quantitative analysis by calculating signal power ratio (SPR) of the heart activity signals obtained through each electrode. We analyzed differences in the performance of heart activity signal acquisition of the six electrodes by performing difference and post-hoc tests using nonparametric statistic methods on the calculated SPR. The results showed a significant difference both in terms of qualitative and quantitative aspects of heart activity signals among the tested contact type textile electrodes. Regarding the configurations of the contact type textile electrodes, the three-dimensionally inflated electrode (3DIE) was found to obtain better quality signals than the flat electrode. However, regarding the electrode size, no significant difference was found in performance of heart signal acquisition for the three electrode sizes. These results suggest that the configuration method (flat/3DIE), which is one of the two requirements of a contact type textile electrode structure for heart activity signal acquisition, has a critical effect on the performance of heart activity signal acquisition for wearable healthcare. Based on the results of this study, we plan to develop a smart clothing technology that can monitor high-quality heart activity without time and space constraints by implementing a clothing platform integrated with the textile electrode and developing a performance improvement plan.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.64-68
• /
• 2019

Purpose In the preparation process for N-13 Ammonia injections, there were radioactive medicines adsorbed on filters remarkably. Hereby, we have compared the adsorption rate and quality test on Millex GS filter and Satorious Minisart filter, both representatively hydrophilic sterilizing filters, also evaluated which filter is more accommodative for N-13 Ammonia injection. Materials and Methods The filters used for sterilization of N-13 Ammonia injections were Millex GS filter($0.22{\mu}m$) mand Satorious Minisart filter ($0.2{\mu}m$), which are generally used to strain aqueous solutions. After the N-13 Ammonia passes through each sterilization filter, the adsorption rate of the filter (n=10) is determined by measuring not only the radioactivity through the filter also the amount of radioactivity remaining in it using a Dose Calibrator. The N-13 Ammonia injections after each filter is tested by the quality control test to conform to the Samsung Medical Center standard. Results The ratio of radioactivity passed through Millex GS indicated $29.0{\pm}17.6%$. Satorious Minisart filters output was $80.9{\pm}3.2%$, respectively. Each ratio of radioactivity adsorbed on the sterile filter was $71.0{\pm}17.6%$ for Millex GS and $19.1{\pm}3.2%$ for the Satorious Minisart filters, respectively. Furthermore, on the ratio of filtered radioactivity, Using Satorious Minisart filter showed about 2.8 times higher than using Millex GS filter. The quality testing of N-13 Ammonia injections through each filter met the Samsung Medical Center standard. Conclusion The Millex GS filter is composed of cellulose acetate and cellulose nitrate, whereas the Satorious Minisart filter if composed only of cellulose acetate. Therefore, the presence of cellulose nitrate in the membrane seems to have made differences. Therefore, the use of Satorious Minisart filter in the preparation of N-13 Ammonia injection solution minimized the loss of radioactive medicines due to filter adsorption, thereby improving the synthesis yield.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.66-83
• /
• 2018

This article focuses how the materials of hatstrings of the 19th to 20th century gat, the Korean top hat for men among the collections of National Folk Museum of Korea, was transformed after port opening treaties with overseas since 1876. As a result of analyzing the materials of the hatstrings, amber, tortoiseshell, wood and bamboo as the traditional materials were used, and ivory, glass (soda glass, lead glass, alkali mixed glass) and plastics (cellulose nitrate, phenol-formaldehyde, polystyrene, acryl) were newly used for the hatstrings. Bamboo, wood and amber were the most frequently used materials. Bamboo was mainly used for the pipe of hatstring and were combined with beads and central decorations of other materials. This shows the trend of bamboo hatstring according to the simplification of the clothing and the culture by Regent Heungseon Daewongun. Ambers were used in the central decorations and beads and the origin of ambers was baltic amber just like the amber relics found in Korea. Compositions of glass were soda glass and alkali mixed glass which were excavated or handed down in Korea from ancient times to Joseon dynasty. But in the case of lead glass, Na2O was detected and it is considered to be a new type lead glass for crafts which came from overseas after port opening since 1876 because it showed the characteristic that it deviates from the lead glass component found in Korea. Plastics such as cellulose nitrate and phenol-formaldehyde were used as new synthetic materials to replace traditional materials such as tortoiseshell, amber, and coral as in the West. Cracks, crazing, crumbly and yellowing of cellulose nitrate of hatstrings were observed by deterioration. The survey of the materials of the 19th to 20th century hatstrings among the collections of National Folk Museum of Korea showed that the introduction of new materials such as glass and plastics were used to replace natural materials such as tortoiseshell and amber along with the use of traditional materials after port opening since 1876.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.177-188
• /
• 2019

The aim of our study was to identify the changing trends in the composition, structure, and spatial distribution of forest vegetation in Apsan Park, a representative urban forest in Daegu, South Korea. A vegetation survey was conducted in 1997 and 2016 using phytosociological methods, and a detailed vegetation map was created using the physiognomic dominant species. There were 22 vegetation types in both 1997 and 2016, but two of those types increased and two decreased. The total coverage per unit area ($100m^2$) of the component vegetation species increased from 163% in 1997 to 182% in 2016, and natural vegetation tended to be more than twice that of artificial vegetation. The average number of species decreased by seven from 25 in 1997 to 18 in 2016. Species diversity (H') increased only slightly from 1,654 in 1997 to 1,680 in 2016, while species dominance (D) decreased by 9% from 0.304 in 1997 to 0.276 in 2016. The similarity in the composition of the forest vegetation was about 78%, which was nearly the same. The life form spectrums of vascular plants changed from '$G-R_5-D_4-e$' in 1997 to '$MM-R_5-D_4-e$' in 2016 and the central dormancy type changed from geophytes (G) to megaphanerophytes (MM). The spatial distribution of the forest vegetation was reduced by approximately four times that of artificial vegetation. The number of forest landscape elements (patches) increased from 269 in 1997 to 294 in 2016, while the average area decreased by 12% from 5.8 ha in 1997 to 5.1 ha in 2016.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.513-521
• /
• 2019

The purpose of this research is to find out the preference of users on the characteristics of the subway sign blank. In detail, The purpose is to introduce the concept of designing various characteristics of the subway sign blank according to characteristics such as gender and age, etc. The methodology of this study is to investigate the preference of the characteristics of the characteristics of the subway sign blank space and analyze the preference of the whole group and the cluster group. A survey was conducted to investigate preferences. A cluster analysis was conducted to analyze the preferences. And a demographic and conjoint analysis was conducted for whole group and the cluster group. The attributes of the subway sign blank space for preference survey are as follow : top and bottom blank, side blank, border line blank, arrow thickness, 'station name' and 'line number' order. The results of the preference analysis are as follows. The importance of the attributes in the whole group is shown in the order of the border line blank, 'station name' and 'line number' blank, side blank, top and bottom blank, and arrow thickness. The cluster group is composed of 3 groups, 1 cluster is a woman who uses the subway almost every day, three to four times a week, and seems to prefer half the side blank. 2 crowd is the user who thinks that 60 or more subway signs are uncomfortable, and preferring the order of 'station name' + 'line number' order without border. The 3 clusters were men in their 20s and 30s, with a preference for 1/5 border line blank and thin arrow thickness. The conclusion is as follows. First, the characteristics of the subway sign blank must be designed consistently. However, it is necessary to consider various factors according to gender, age, and frequency of subway use for specific regions or routes. Secondly, It has been shown that, depending on the specific area or route, it is possible to design two or more types of design, not one type of standardized marking of the characteristics of the subway sign blank.