• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.73-77
• /
• 2009

The block housing type is coming to fore as a 'low-rise high-density housing type', which can resolve the all sorts of problem caused in Korea apartment housing complex and single-detached residental area in terms of livability, urbanity, and community. To analyze the characteristics of the block housing, the block housing in Eunpyeong New Town, in Korea was analyzed as a sample for post occupancy evaluation. The analysis show that the block housing is useful low-rise and high-density housing type, which ensures the livability as well as the urbanity and community. In details the analysis also shows the user satisfaction from the perspective of living and facility use within the block housing and individual unit.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권1호
• /
• pp.55-59
• /
• 2013

In the oral and maxillofacial area, bone defects are created by various reasons and demand for bone grafts, while dental implant implantation has been increased consistently. To solve these problems, there has been development of autogenous tooth-bone graft material (AutoBT$^{(R)}$, Korea Tooth Bank Co., Korea), and we have collected ground reasons to substitute free autobone graft with this material in clinical use. This autogenous tooth-bone graft material is produced in powder type and block type. Block type is useful in esthetic reconstruction of the defect site and vertical and horizontal augmentation of alveolar bone because this type has high strength value, well maintained shape and is less absorbed. Therefore, the author of this study gained favorable result by grafting the block type autogenous tooth-bone graft material after dental implant implantation on the bone defects of the mandibular molar extraction site. Moreover, the author represents this case with literature review after confirming bone remodeling on the computed tomography image and by histological analysis.

• 한국정보전자통신기술학회논문지
• /
• 제12권3호
• /
• pp.179-185
• /
• 2019

본 논문은 저전력 특징추출 알고리즘의 구현을 위한 블록 유형 분류 기반 영상 이진화 방법을 제안한다. 제안하는 방법은 영상 내에서 $64{\times}64$ macro block 크기로 영상을 나누고 각 블록 유형별 threshold 값을 한 번만 연산한 후 그 값을 re-use 하는 기법으로 구현될 수 있다. 알고리즘은 threshold 값이 같은 영상/블록 유형 내에서 최대 9%의 변화율만 발생하는 것을 정량적인 결과를 기반으로 검증했다. 기존 알고리즘은 $512{\times}512$ 이미지 기준으로 macro block을 $64{\times}64$로 나누었을 때 64개의 블록을 위해 threshold 값을 연산해야 하지만 제안하는 방법은 모두 같은 블록 유형이 출력되는 best case의 경우 threshold 연산을 한번만 수행하고, 나머지 63개의 블록에 대해서는 블록 유형 구분 과정만 수행하면 adaptive threshold calculation 연산을 98% 생략할 수 있다. 모든 블록 유형이 발생하는 worst case일 때 threshold calculation 연산은 다섯 번 수행되고, 나머지 59개의 블록에 대해서는 블록 유형 구분 과정만 수행할 수 있으므로 93%의 adaptive threshold calculation 연산을 생략할 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제17권2호
• /
• pp.34-64
• /
• 1989

포장(包裝) 용적(容積) 감소에 따른 수송비(輸送費) 절감(節減) 효과(效果)가 있어 조립시(組立式) 탁자류(卓子類) 가구(家具)의 제작(製作)에 널리 쓰이는 CBA(corner block with anchor bolt) 접합방식(接合方式)은 일정기간(一定期間) 사용(使用)함에 따라 접합부위(接合部位)가 약해지고 그 결과(結果) 구조(構造)가 불안정(不安定)하게 되는 반강접합(半剛接合)(semi-rigid joint) 특유(特有)의 결점(缺點)도 지니고 있다. 따라서 본(本) 연구(硏究)에서는 CBA 접합(接合) 강도(强度)에 영향하는 주요(主要) 설계(設計) 인자(因子)로서 side rail 규격, corner block의 side rail에의 부착시(時) 보강재(補强材)의 효과(效果) 및 corner block관통 anchor bolt의 사용(使用) 수(數) 그리고 corner block의 형태등(等)의 평가(評價)를 하기 위해 22개(個)의 접합군(接合群) 별(別)로 총(總) 88개(個)의 table section 시험체(試驗體)를 제작(製作)한 후(後)그들의 강성(剛性) 계수(係數)(Z - 값) 및 유효강도(有效强度)를 수평 하중(荷重)에 의한 변형측정(變形測定) 실험(實驗)을 통해 결정(決定)한 후 설계(設計) 인자별(因子別) 효과(效果)를 비교 분석(分析)하였다. 분석결과(分析結果), side rail의 높이 증대(增大) 및 corner block 부착시(時) PVAc 수지(樹脂)의 사용효과(使用效果)가 뚜렷하여 유효강도(有效强度)의 유의적(有意的) 향상(向上)을 나타냈고 anchor bolt의 효과(效果) 역시 2개 사용시(使用時)가 1개 사용시(使用時) 보다 훨씬 큰 것으로 나타났다. 또 side rail 높이 와 anchor bolt 사용(使用) 수(數)간에는 상호작용(相互作用) 효과(效果)도 있었다. 그러나 side rail의 두께 효과(效果)는 22mm에서 25mm로 증대(增大)시켰을때 뚜렷한 상승 경향(傾向)은 보여주지 못했다. 한편 corner block의 형태는 MDF를 주재료(主材料)로 사용(使用)한 탁자(卓子) 설계시(設計時)는 두께 25mm, 높이 100mm의 side rail에 PVAc 수지(樹脂)로 보강(補强)하고 mitered corner block에 2개(個)의 anchor bolt를 관통시킨 경우가 유효강도(有效强度) 3171.7 kgf-cm로 22개의 접태군(接台群)들 중 최대치(最大値)를 나타냄으로써 miter type이 rectangular type보다 바람직한 것으로 나타났다. 결론적(結論的)으로 자재(資材)의 효과적(效果的) 이용(利用)을 통한 생산비(生産費) 절감(節減)과 동시(同時)에 구조(構造)의 안정(安定)된 강도적(强度的) 측면(側面)을 고려할 때, 두께 22mm, 높이 75mm의 MDF side rail에 mitered corner block을 PVAc 수지(樹脂)와 나사못을 이용하여 부착한 후(後) 2개(個)의 anchor bolt를 관통시키는 방법(方法)을 가장 합리적(合理的)인 MDF 사용(使用) 조립시(組立式) 탁자(卓子) 설계(設計) 방안(方案)으로 제시(提示)하는 바이다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.99-107
• /
• 2004

Lubrication characteristics between a cylinder block and a valve plate for high speed bent-axis type hydraulic pump play an important role in volumetric efficiency and durability of pump. In this paper, a finite element method is presented for the computation of the pressure distribution between a cylinder block and a valve plate for high speed bent-axis type hydraulic pump. Also, a Runge-Kutta method is applied to simulate the cylinder block dynamics of three-degrees of freedom motion. From the results of computation, we can draw two major conclusions. One is related to the fluid film characteristics between a cylinder block and a valve plate and the other is related to the average leakage that is determined by the pressure gradient and the clearance near the discharge port. The numerical results of cylinder block dynamics were compared with the experimental results using eddy-current type gap sensors those are fixed at a pump housing.

• 한국주거학회논문집
• /
• 제24권3호
• /
• pp.9-18
• /
• 2013

This paper aims to investigate the design characteristics of a single housing block which is increasing in urban areas. For the analysis, all cases of single block housing in Daejeon metropolitan city were gathered into a database. Main concerns were on the location and the physical characteristics. The results of this study were as follows; 1) single block housing has been increasing both in the new developed areas and the existing urban areas 2) their location has shifted from residential districts to semi-residential and commercial districts. For this reason, the size and density has been increasing 3) the slab block with the hall type and the exterior corridor type were general in residential districts, diverse ones, however, including the point tower type were increasing with unusual circulation types such as central corridor, central core, double corridor, and mixed type in semi-residential and commercial districts 4) there were 5 types of access systems, and especially the street access and the piloti access were increasing, which were related with the high density.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.61-65
• /
• 2010

The performance of slopes during earthquake is often accessed in terms of permanent deformation. In the assessment of permanent deformation, Newmark-type rigid block analysis is widely used. Original Newmark-type block approach, however, assumes the potential sliding mass to be rigid, and has been criticized to be potentially unconservative. The paper reviews analytically the impact of this noncompliance assumption on computed permanent deformations. The results indicate that there is a simple criterion that can be used to determine the level of conservativeness of the rigid block approach in cases of gently-sloping slip surfaces and retaining walls.

• 한국멀티미디어학회논문지
• /
• 제23권3호
• /
• pp.476-482
• /
• 2020

In this paper, we propose a block-based modularity architecture design method for distributed machine learning. The proposed architecture is a block-type module structure with various machine learning algorithms. It allows free expansion between block-type modules and allows multiple machine learning algorithms to be organically interlocked according to the situation. The architecture enables open data communication using the metadata query protocol. Also, the architecture makes it easy to implement an application service combining various edge computing devices by designing a communication method suitable for surrounding applications. To confirm the interlocking between the proposed block-type modules, we implemented a hardware-based modularity application system.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.81-87
• /
• 2009

The purpose of this study is to evaluate of the outdoor thermal environment by building scale and block type as variable factors. In this study, 18 cases of office in central business district that have different condition are compared about their surface temperature, HIP(Heat Island Potential), and MRT(Mean Radiant Temperature). They are simulated with 3-dimension numerical simulation software named Hoyano-model. The output results contain visualized distribution chart and numerical data. The results of evaluation are as follows. (1)The surface temperature of the building becomes higher as building coverage ratio is higher but floor area ratio is lower. In same conditions, unified block type is maximum $3.2^{\circ}C$ higher than divided block type. (2)HIP shows different daily pattern as block type. During daytime, divided block type is much higher than unified block type but after sunset, it is changed. (3)MRT shows different distribution pattern as sunlight moves expecially at noon. (4)As the results of this study, cases that have high floor area ratio condition show lower surface temperature by tendency to stay low indoor temperature in office building and big rate of windows on building surface.

• 대한수학회보
• /
• 제52권4호
• /
• pp.1375-1382
• /
• 2015

We investigate what happens when we try to work with continuing block codes (i.e., left or right continuing factor maps) between shift spaces that may not be shifts of finite type. For example, we demonstrate that continuing block codes on strictly sofic shifts do not behave as well as those on shifts of finite type; a continuing block code on a sofic shift need not have a uniformly bounded retract, unlike one on a shift of finite type. A right eresolving code on a sofic shift can display any behavior arbitrary block codes can have. We also show that a right continuing factor of a shift of finite type is always a shift of finite type.