|
| 1 |
Effect of Free Abrasives on Material Removal in Lap Grinding of Sapphire Substrate
Seo, Junyoung;Kim, Taekyoung;Lee, Hyunseop;
/
Korean Tribology Society
, v.34, no.6, pp.209-216,
|
|
| 2 |
Tribological Performance of Ni-Cr Composite Coating Sprayed onto AISI 4340 (SNCM439) Steel by High Velocity Oxygen Fuel
Umarov, Rakhmatjon;Pyun, Young-Sik;Amanov, Auezhan;
/
Korean Tribology Society
, v.34, no.6, pp.217-225,
|
|
| 3 |
Effect of Citric Acid in Cu Chemical Mechanical Planarization Slurry on Frictional Characteristics and Step Height Reduction of Cu Pattern
Lee, Hyunseop;
/
Korean Tribology Society
, v.34, no.6, pp.226-234,
|
|
| 4 |
Study on the Superlubricity and Running-in Period of Vitreous Enamel Coating using Phosphoric Acid
Han, Do-Lyeol;Kim, Tae-Hyung;Kim, Dae-Eun;
/
Korean Tribology Society
, v.34, no.6, pp.235-240,
|
|
| 5 |
A Study on Friction and Wear Properties of Tetrahedral Amorphous Carbon Coatings on Various Counterpart Materials
Lim, Min Szan;Jang, Young-Jun;Kim, Jong-Kuk;Kim, Jong-Hyoung;Kim, Seock-Sam;
/
Korean Tribology Society
, v.34, no.6, pp.241-246,
|
|
| 6 |
Effect of Thermal Conductivity of Bearing on the Lubrication Performance of Parallel Slider Bearing
Park, TaeJo;Lee, WonSeok;Park, JiBin;
/
Korean Tribology Society
, v.34, no.6, pp.247-253,
|
|
| 7 |
A Study on the Tribological Characteristics of Low Friction Coating Deposited on SUJ2 Bearing Steel
Kang, Kyung-Mo;Shin, Dong-Gap;Park, Young-Hun;Kim, Se-Woong;Kim, Dae-Eun;
/
Korean Tribology Society
, v.34, no.6, pp.254-261,
|
|
| 8 |
Friction and Wear Characteristics of Gray Cast Iron Surface Processed by Broaching Method
Kwon, Mun-Seong;Kang, Kyeong-Hee;Kim, Dae-Eun;
/
Korean Tribology Society
, v.34, no.6, pp.262-269,
|
|
| 9 |
A Study on the Effect of UNSM Treatment on the Mechanical and Tribological Properties of STS 316L Printed by Selective Laser Melting
Ro, J.S.;Sanseong, C.H.;Umarov, R.;Pyun, Y.S.;Amanov, A.;
/
Korean Tribology Society
, v.34, no.6, pp.270-278,
|
|
| 10 |
Stick-slip in Chemical Mechanical Polishing Using Multi-Particle Simulation Models
Jung, Soyoung;Sung, In-Ha;
/
Korean Tribology Society
, v.34, no.6, pp.279-283,
|
|
| 11 |
Effects of Ball Milling on Sliding Wear Behavior of Ni-Al Intermetallics Coated on Mild Steel through Induction Heating Process
Lee, Han-Young;
/
Korean Tribology Society
, v.34, no.6, pp.284-291,
|
|
| 12 |
Effect of the Properties of Diesel Engine Oil and Aging on Exhaust Gases and DPF
Kim, JeongHwan;Kim, KiHo;Lee, JungMin;
/
Korean Tribology Society
, v.34, no.6, pp.292-299,
|
|
| 13 |
Testing of Load Capacity of a Foil Thrust Bearing
Kim, Choong Hyun;Park, Jisu;
/
Korean Tribology Society
, v.34, no.6, pp.300-306,
|
|
| 14 |
Analysis of Sealing Effectiveness Based on Spring Stiffness of a Spring-Energized Static Seal
Jang, Soo Yeon;Sung, In-Ha;
/
Korean Tribology Society
, v.34, no.6, pp.307-312,
|
|
| 15 |
Tribological Properties of Carbon Nanotube Thin Films by using Electrodynamic Spraying Method
Kim, Chang-Lae;Kim, Dae-Eun;Kim, Hae-Jin;
/
Korean Tribology Society
, v.34, no.6, pp.313-317,
|
|
| 16 |
Real Time Analysis of Friction/Wear Characteristics of Metal Coatings with a Tribo-tester Installed in an SEM
Kim, Hae-Jin;Kim, Dae-Eun;Kim, Chang-Lae;
/
Korean Tribology Society
, v.34, no.6, pp.318-324,
|
|
| 17 |
Transmission Error Analysis of ZI and ZA Profile Worm Gears
Lee, Tae-Hoon;Suh, Junho;Park, Noh-Gill;
/
Korean Tribology Society
, v.34, no.6, pp.325-331,
|
|