Influence of Process Conditions on Properties of Cu2O Thin Films Grown by Electrodeposition |
Cho, Jae Yu
(Department of Materials Science and Engineering, and Optoelectronics Convergence Research Center, Chonnam National University)
Ha, Jun Seok (Department of Advanced Chemicals and Engineering, and Optoelectronics Convergence Research Center, Chonnam National University) Ryu, Sang-Wan (Department of Physics, and Optoelectronics Convergence Research Center, Chonnam National University) Heo, Jaeyeong (Department of Materials Science and Engineering, and Optoelectronics Convergence Research Center, Chonnam National University) |
1 | S. H. Lee, B. M. Park, K. H. Kim, Y. C. Chang, J. Pyee, and H. J. Chang, "Effects of Passivation Thin Films by Spray Coatings on Properties of Flexible CIGS Solar Cells", J. Microelectron. Packag. Soc., 23(3), 57 (2016). DOI |
2 | Q. Guo, S. J. Kim, M. Kar, W. N. Shafarman, R. W. Birkmire, E. A. Stach, R. Agrawal, and H. W. Hillhouse, "Development of Nanocrystal and Nanoring Inks for Low-cost Solar Cells", Nano Lett., 8, 2982 (2008). DOI |
3 | C. Wadia, A. P. Alivisatos, and D. M. Kammen, "Materials Availability Expands the Opportunity for Large-Scale Photovoltaics Deployment", Environ. Sci. Technol., 43, 2072 (2009). DOI |
4 | B. G. Mendis, M. C. J. Goodman, J. D. Major, A. A. Taylor, K. Durose, and D. P. Halliday, "The Role of Secondary Phase Precipitation on Grain Boundary Electrical Activity in (CZTS) Photovoltaic Absorber Layer Material", J. Appl. Phys., 112, 124508 (2012). DOI |
5 | M. Kumar, A. Dubey, N. Adhikari, S. Venkatesan, and Q. Qiao, "Strategic Review of Secondary Phases, Defects and Defect-complexes in Kesterite CZTS-Se Solar Cells", Energy Environ. Sci., 8, 3134 (2015). DOI |
6 | A. Mittiga, E. Salza, F. Sarto, M. Tucci, and R. Vasanthi, "Heterojunction Solar Cell with 2% Efficiency Based on a Substrate", Appl. Phys. Lett., 88, 163502 (2006). DOI |
7 | T. Minami, Y. Nishi, T. Miyata, and J. I. Nomoto, "High-efficiency Oxide Solar Cells with ZnO/ Heterojunction Fabricated on Thermally Oxidized Sheets", Appl. Phys. Express, 4, 062301 (2011). DOI |
8 | Y. S. Lee, J. Heo, S. C. Siah, J. P. Mailoa, R. E. Brandt, S. B. Kim, R. G. Gordon, and T. Buonassisi, "Ultrathin Amorphous Zinc-tin-oxide Buffer Layer for Enhancing Heterojunction Interface Quality in Metal-oxide Solar Cells", Energy Environ. Sci., 6, 2112 (2013). DOI |
9 | S. W. Lee, Y. S. Lee, J. Heo, S. C. Siah, D. Chua, R. E. Brandt, S. B. Kim, J. P. Mailoa, T. Buonassisi, and R. G. Gordon, "Improved -based Solar Cells Using Atomic Layer Deposition to Control the Cu Oxidation State at the p-n Junction", Adv. Energy Mater., 4(11), 1301916 (2014). DOI |
10 | J. Kaur, O.Bethge, R. A. Wibowo, N. Bansal, M. Bauch, R. Hamid, E. Bertagnolli, and T. Dimopoulos, "All-Oxide Solar Cells Based on Electrodeposited Absorber and Atomic Layer Deposited ZnMgO on Precious-metal-free Electrode", Sol. Energy Mater. Sol. Cells, 161, 449 (2017). DOI |
11 | Y. Ievskaya, R. L. Z. Hoye, A. Sadhanala, K. P. Musselman, and J. L. MacManus-Driscoll, "Fabrication of ZnO/ Heterojunctions in Atmospheric Conditions: Improved Interface Quality and Solar Cell Performance", Sol. Energy Mater. Sol. Cells, 135, 43 (2015). DOI |
12 | T. Minami, Y. Nishi, and T. Miyata, "Efficiency Enhancement Using a Thin Film as an n-type Window Layer in -based Heterojunction Solar Cells", Appl. Phys. Express, 9, 52301 (2016). DOI |
13 | S. Y. Park, and J. H. Lee, "Electrodeposition of Nano Powder Dispersed Nickel Composite Coating", J. Microelectron. Packag. Soc., 19(4), 65 (2012). DOI |
14 | S. Noda, H. Shima, and H. Akinaga, "/ZnO Heterojunction Solar Cells Fabricated by Magnetron-Sputter Deposition Method Films Using Sintered Ceramics Targets", J. Phys. Conf. Ser., 433, 12027 (2013). DOI |
15 | S. S. Jeong, A. Mittiga, E. Salza, A. Masci, and S. Passerini, "Electrodeposited ZnO/ Heterojunction Solar Cells", Electrochim. Acta, 53, 2226 (2008). DOI |
16 | P. E. de Jongh, D. Vanmaekelbergh, and J. J. Kelly, ": Electrodeposition and Characterization", Chem. Mater., 11, 3512 (1999). DOI |
17 | A. El-Shaer, and A. R. Abdelwahed, "Potentiostatic Deposition and Characterization of Cuprous Oxide Thin Films", ISRN Nanotechnology, 2013, 271545 (2013). |
18 | Y. S. Lee, D. Chua, R. E. Brandt, S. C. Siah, J. V. Li, J. P. Mailoa, S. W. Lee, R. G. Gordon and T. Buonassisi, "Atomic Layer Deposited Gallium Oxide Buffer Layer Enables 1.2 V Open-Circuit Voltage in Cuprous Oxide Solar Cells", Adv. Mater., 26, 4704 (2014). DOI |
19 | L. C. Wang, N. R. de Tacconi, C. R. Chenthamarakshan, K. Rajeshwar and M. Tao, "Electrodeposited Copper Oxide Films: Effect of Bath pH on Grain Orientation and Orientation-dependent Interfacial Behavior", Thin Solid Films, 515, 3090 (2007). DOI |
20 | S. Bijani, L. Martinez, M. Gabas, E. A. Dalchiele and J.-R. Ramos-Barrado, "Low-Temperature Electrodeposition of Thin Films: Modulation of Micro-Nanostructure by Modifying the Applied Potential and Electrolytic Bath pH", J. Phys. Chem. C., 113, 19482 (2009). DOI |
21 | M. J. Siegfried and K. S. Choi, "Electrochemical Crystallization of Cuprous Oxide with Systematic Shape Evolution", Adv. Mater., 16(19), 1743 (2004). DOI |
22 | J. Katayama, K. Ito, M. Matsuoka and J. Tamaki, "Performance of /ZnO Solar Cell Prepared by Two-step Electrodeposition", J. Appl. Electrochem., 34, 687 (2004). DOI |