|
| 1 |
Redistribution of Vacancy Concentration in Metal Specimens under Stress-induced Diffusion at a High Temperature
Yoon, Seon-Jhin;Cho, Yong-Moo;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.1-6,
|
|
| 2 |
The Korea dies and molds industry - Part 1. The Status of die and mold industry in Korea
Im, Young-Taek;Shim, Woo-Phil;Heo, Young-Moo;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.7-12,
|
|
| 3 |
A study on the design and manufacture of test work drawing die
Lee, Chun-Kyu;Choi, Kye-Kwang;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.13-17,
|
|
| 4 |
Gas cooling for optimization of mold cooling
Lim, Dong-Wook;Kim, Ji-Hun;Shin, Bong-Cheol;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.18-25,
|
|
| 5 |
A study on improvement of manufacturing process of aluminum chassis drive gear
Lee, Chun-Kyu;Choi, Kye-Kwang;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.26-30,
|
|
| 6 |
A performance comparison of heat sink using FEM in the natural convection
Lee, Min;Lee, Chun-Kyu;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.31-35,
|
|
| 7 |
A Study on the Selection of Stainless Steel for Automotive Inside Mirror Joint by Vacuum Sintering
Sung, Si-Myung;Jung, In-Ryung;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.36-40,
|
|
| 8 |
Assessment of Stability of Stability of Hydraulic Breaker Cylinder and Piston through Thermal-Structural coupled Field Analysis by Finite Element Method
Lim, Dong-Wook;Park, Yoon-Soo;Shin, Bong-Cheol;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.41-46,
|
|
| 9 |
A study on processing characteristics of plasma etching using photo lithography
Baek, Seung-Yub;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.47-51,
|
|
| 10 |
A study on reduction of springback defects in excavator tank cover part
Jeon, Yong-Jun;Lee, Ha-Sung;Kim, Dong-Earn;Heo, Young-Moo;
/
Korean Society of Die & Mold Engineering
, v.12, no.1, pp.52-57,
|
|