Browse > Article
http://dx.doi.org/10.7736/KSPE.2017.34.3.179

A Study on the Development of Overload Detecting Pad for Low Speed WIM System  

Lee, Choon-Man (School of Mechanical Engineering, Changwon National University)
Choi, Young-Ho (School of Mechanical Engineering, Changwon National University)
Kim, Eun-Jung (School of Mechanical Engineering, Changwon National University)
Publication Information
Journal of the Korean Society for Precision Engineering / v.34, no.3, 2017 , pp. 179-184 More about this Journal
Abstract
Recently, traffic accidents and damage on the highway have increased because of overloaded vehicles. The existing overload-detecting system has a low accuracy rate. An overload-detecting system using a weigh-in-motion (WIM) system has been developed to solve this problem. The WIM system can be used to detect overloaded vehicles by measuring the weight of the vehicles. The WIM system is divided into high-speed and low-speed types. The inaccuracy rate in the low-speed WIM system results mainly from the low response rate of the sensor when the velocity is moving at more than 20 km/h. In this study, a low-speed overload-detecting pad with a hydraulic structure using a WIM system was developed to make the system more accurate. The structural and formal analysis was carried out by using a finite element method (FEM) in order to analyze the structural stability and the extrusion velocity of the system. In addition, a static load test was performed to confirm the linearity and accuracy of the pad.
Keywords
Overload detecting pad; Weigh-in-motion system; Structural analysis; Forming analysis; Static load test;
Citations & Related Records
Times Cited By KSCI : 9  (Citation Analysis)
연도 인용수 순위
1 Hernandez, V. S., Tok, A., and Ritchie, S. G., “Integration of Weigh-in-Motion (WIM) and Inductive Signature Data for Truck Body Classification,” Transportation Research Part C: Emerging Technologies, Vol. 68, No. 7, pp. 1-21, 2016.   DOI
2 Faruk, A. N., Liu, W., Lee, S. I., Naik, B., Chen, D. H., et al., “Traffic Volume and Load Data Measurement Using a Portable Weigh-in-Motion System: A Case Study,” International Journal of Pavement Research and Technology, Vol. 9, No. 3, pp. 202-213, 2016.   DOI
3 Jo, B. W., Yoon, K. W., Park, J. H., and Kim, H., “A Basic Study on Vehicle Load Analyzing System for Embedded Road,” Journal of the Korean Society of Civil Engineers, Vol. 31, No. 1, pp. 127-132, 2011.
4 Kwon, S. M. and Suh, Y. C., “Development and Application of the High Speed Weigh-in-Motion for Overweight Enforcement,” Journal of the Korean Society of Road Engineers, Vol. 11, No. 4, pp. 69-78, 2009.
5 Lee, D. S. and Oh, J. S., “Development of Truck Axle Load Estimation Model Using Weigh-in-Motion Data,” Journal of the Korean Society of Civil Engineers, Vol. 31, No. 4, pp. 511-518, 2011.
6 Park, J. U., Kim, Y. B., Chung, K. H., and Ahn, K. S., “A Research for Improvement of WIM System by Abnormal Driving Patterns Analysis,” Journal of Internet Computing and Services, Vol. 11, No. 4, pp. 59-72, 2010.
7 Jo, H. H., Lee, S. K., Jung, C. S., and Kim, B. M., “A Non-Steady State FE Analysis of Al Tubes Hot Extrusion by a Porthole Die,” Journal of Materials Processing Technology, Vol. 173, No. 2, pp. 223-231, 2006.   DOI
8 Lee, J. M., Kim, B. M., Kang, C. G., and Jo, H. H., “Development of Direct Extrusion Process on Al1050 Condenser Tube by Using Porthole Die,” J. Korean Soc. Precis. Eng., Vol. 21, No. 7, pp. 53-61, 2004.
9 Zhang, Z. H., Hou, W. R., Huang, D. N., and Xie, J. X., "Mesh Reconstruction Technology of Welding Process in 3D FEM Simulation of Porthole Extrusion and Its Application," Procedia Engineering, Vol. 36, pp. 253-260, 2012.   DOI
10 Joe, Y. J., Lee, S. K., Oh, K. H., Park, S. W., Lee, W. S., et al., “Development of Porthole Die on Aluminum Extrusion for the Automobile Control Arm,” J. Korean Soc. Precis. Eng., Vol. 24, No. 4, pp. 102-108, 2007.
11 Liu, G., Zhou, J., and Duszczyk, J., “FE Analysis of Metal Flow and Weld Seam Formation in a Porthole Die During the Extrusion of a Magnesium Alloy into a Square Tube and the Effect of Ram Speed on Weld Strength,” Journal of Materials Processing Technology, Vol. 200, No. 1, pp. 185-198, 2008.   DOI
12 Bae, J. H., Lee, J. M., and Kim, B. M., “Extrusion Process Analysis for Al Condenser Tube with Multi Hole,” Transactions of Materials Processing, Vol. 13, No. 8, pp. 723-730, 2004.   DOI
13 Lee, D. S. and Oh, J. S., “Development of Truck Axle Load Distribution Model Using WIM Data,” Journal of the Korean Society of Civil Engineers, Vol. 26, No. 5, pp. 821-829, 2006.
14 Han, D. S., Kim, S. H., Do, M. S., and Hwang, S. W., “Introduction of WIM System and Reform Measure of Korea WIM Specification,” Journal of the Korean Society of Civil Engineers, Vol. 56, No. 1, pp. 58-68, 2008.
15 Gil, H. B. and Kang, S. G., “Characteristics of Heavy Vehicles Using Expressway Networks Based on Weigh-in-motion Data,” Journal of the Korean Society of Civil Engineers, Vol. 33, No. 5, pp. 1731-1740, 2013.   DOI
16 Karim, M. R., Ibrahim, N. I., Saifizul, A. A., and Yamanaka, H., “Effectiveness of Vehicle Weight Enforcement in a Developing Country using Weigh-in-Motion Sorting System Considering Vehicle By-Pass and Enforcement Capability,” International Association of Traffic and Safety Sciences, Vol. 37, No. 2, pp. 124-129, 2014.
17 Jo, B. W., Yoon, K. W., Park, J. H., and Choi, J. S., “A Study for Smart Overload Vehicle Regulation System,” The Journal of the Computational Structural Engineering, Vol. 24, No. 4, pp. 399-404, 2011.
18 Han, L. D., Ko, S. S., Gu, Z., and Jeong, M. K., “Adaptive Weigh-in-Motion Algorithms for Truck Weight Enforcement,” Transportation Research Part C: Emerging Technologies, Vol. 24, No. 8, pp. 256-269, 2012.   DOI