|
1 |
A Study on Improved Drill Shape for Efficient Drilling of Inconel 718 Using the Design of Experiment
Kim, Do Hyeog;Park, Ki Bum;Cho, Young Tae;Jung, Yoon Gyo;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.161-166,
|
|
2 |
The Effect of Tension and Drop Height on Contact Angle of Droplet on Flexible Substrate in Roll-to-Roll Systems
Kim, Dongguk;Lee, Changwoo;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.167-172,
|
|
3 |
A Study on the Analysis and Design for a Ball Screw Whirling Machine
Lee, Choon-Man;Moon, Sung-Ho;Kim, Eun-Jung;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.173-178,
|
|
4 |
A Study on the Development of Overload Detecting Pad for Low Speed WIM System
Lee, Choon-Man;Choi, Young-Ho;Kim, Eun-Jung;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.179-184,
|
|
5 |
Experimental Characterization of Turning Process of Titanium Alloy Using Cryogenic Cooling and Nanofluid Minimum Quantity Lubrication
Kim, Jin Woo;Kim, Jung Sub;Lee, Sang Won;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.185-189,
|
|
6 |
Correction in the Measurement Error of Water Depth Caused by the Effect of Seafloor Slope on Peak Timing of Airborne LiDAR Waveforms
Sim, Ki Hyeon;Woo, Jae Heun;Lee, Jae Yong;Kim, Jae Wan;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.191-197,
|
|
7 |
Focused-Infrared-Light Assisted Roll-to-Roll Hot Embossing
Jo, Jeongdai;Kim, Wooseop;Kim, Kwang-Young;Choi, Young-Man;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.199-203,
|
|
8 |
Evaluation of Critical Speed for Active Steering Bogie Prototype
Hur, Hyun Moo;Park, Joon-Hyuk;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.205-210,
|
|
9 |
Dynamic Characteristic Evaluation of the Bucket Elevator Chain Pin and Plate
Kim, Chang Uk;Lee, Dong Woo;Park, Seung Bin;Song, Jung Il;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.211-215,
|
|
10 |
Fundamental Study on the Development of a New Incremental Roll Forming Process for Structural Pipe Manufacturing
Son, Jong Youn;Yoon, Hee Seok;Park, Won Kyun;Shim, Do Sik;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.217-224,
|
|
11 |
Erratum to: Study on the Evaluation of Machining Characteristics of Trochoidal Profile by Turn-Mill
Lee, Choon-Man;Ahn, Jong Wook;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.225-225,
|
|
12 |
Erratum to: Study on the Preheating Method of NURBS Shaped Workpiece by Laser Assisted Machining
Kim, Eun-Jung;Lee, Choon-Man;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.227-227,
|
|
13 |
Erratum to: Study on the Transmission Error Prediction for a Spur Gear Pair
Zhang, Qi;Zhang, Jing;Zhu, Zhong Gang;Wang, Zhen Rong;Xu, Zhe-zhu;Lyu, Sung Ki;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.229-229,
|
|
14 |
Erratum to: Study on the Radial Stress Considering Mechanical Characteristics of Substrate in Wound Rolls
Kim, Seongyong;Lee, Changwoo;
/
Korean Society for Precision Engineering
, v.34, no.3, pp.231-231,
|
|