|
| 1 |
Drawing Process Design and Mechanical Properties Control for High Strengthening of CP Titanium
Choi, Seong Woo;Park, Chan Hee;Lee, Sang Won;Yeom, Jong Taek;Hong, Jae Keun;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.77-81,
|
|
| 2 |
Design of a Multi-Step Warm Heading Process for Subminiature Screws
Jang, Yeon Hui;Jeong, Jin Hwan;Jang, Myung Guen;Hong, Jae-Keun;Kim, Jong-Bong;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.83-87,
|
|
| 3 |
An Investigation of Thread Rolling Characteristics of Titanium Micro-Screws according to Die Design Parameters
Lee, Ji Eun;Kim, Jong-Bong;Park, Keun;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.89-94,
|
|
| 4 |
Evaluation on Effect of Hole Machining for Application of M1.0 Subminiature Screw to CFRP Laminate Using FEM
Kim, Dae Young;Kim, Hee Seong;Kim, Ji Hoon;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.95-99,
|
|
| 5 |
Effect of Slurry Flow in Spray Slurry Nozzle System on Cu CMP
Lee, Da Sol;Jeong, Seon Ho;Lee, Jong Woo;Jeong, Jin Yeop;Jeong, Hae Do;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.101-106,
|
|
| 6 |
3D Surface and Thickness Profile Measurements of Si Wafers by Using 6 DOF Stitching NIR Low Coherence Scanning Interferometry
Park, Hyo Mi;Choi, Mun Sung;Joo, Ki-Nam;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.107-114,
|
|
| 7 |
Design and Evaluation of the Control Performance of a Compliant Arm Support
Kim, Sang-Hun;Jeong, Useok;Park, Daegeun;Koo, Inwook;Cho, Kyu-Jin;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.115-123,
|
|
| 8 |
The Adaptive Backstepping Controller of RBF Neural Network Which is Designed on the Basis of the Error
Kim, Hyun Woo;Yoon, Yook Hyun;Jeong, Jin Han;Park, Jahng Hyon;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.125-131,
|
|
| 9 |
Heuristic Algorithm for Performance Improvement of Non-Communication Inverter Type Refrigerator
Min, Seon Gyu;Kim, Hyung Jun;Lee, Ju Kyoung;Hwang, Jun Hyeon;Lee, Suk;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.133-138,
|
|
| 10 |
A Study on the Development of the Split-Type Carbon Composite Bicycle Frames
Park, Chan Gon;Choi, Young;Kang, Bong Yong;Kim, Eun Gyu;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.139-143,
|
|
| 11 |
Simulation Study on the Design of Air Brake Valve for Automobile Applications
Lee, Dong Woo;Jun, Min-Seung;Song, Jung Il;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.145-150,
|
|
| 12 |
The Solution of Peening Residual Stress by Angled Impact of Multi Elliptical Shot Ball Based on Finite Element Analysis
Kim, Taehyung;
/
Korean Society for Precision Engineering
, v.34, no.2, pp.151-156,
|
|