Browse > Article
http://dx.doi.org/10.7736/KSPE.2013.30.9.931

Characteristics of Fiber Laser Lap Welding of Pure Aluminum Multi-thin Plate  

Yang, Yun Seok (Department of Advanced parts & Materials Engineering, Chosun Univ.)
Park, Eun Kyeong (Department of Advanced parts & Materials Engineering, Chosun Univ.)
Lee, Ka Ram (Department of Advanced parts & Materials Engineering, Chosun Univ.)
Yoo, Young Tae (Department of Mechatronics, Engineering, Chosun Univ.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.30, no.9, 2013 , pp. 931-942 More about this Journal
Abstract
In this study, we analyzed and compared the ultrasonic welding with the laser welding for the pure aluminium thin plates in a series of secondary lithium-ion batteries which are currently being produced by the ultrasonic welding; and performed the experiment for the purpose of the preceding study to replace the ultrasonic welding method with the laser welding method. As a result, the weld width of ultrasonic welding was 5mm, but that of laser welding was about 1~1.5 mm. As a result of tension test, the tensile strength was high when the pulse duration hour was short at the low peak power, while the high tensile strength was achieved when the pulse duration hour was long at the high peak power. The value of tensile strength was higher in the ultrasonic welding while the laser welding showed a maximum 45% better result as for the welding width.
Keywords
Ultra-thin Aluminium; Lap Welding; Fiber Laser; Secondary Battery;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Lee, Y. S., "Study on the Nd:YAG laser weldability of aluminum alloys," M.Sc. Thesis, Department of Advanced materials Engineering, Dong-Eui Univ., 2005.
2 Park, C. W., Paeng, J. G., and Ok, J. S., "A Study on Numerical Termo-mechanical Analysis for Aluminum 6061 Friction Stir Welding," J. Korean Soc. Precis. Eng., Vol. 29, No. 6, pp. 632-639, 2012.   과학기술학회마을   DOI   ScienceOn
3 Yoo, C. D., "Design of Ultrasonic Welding Horn," The Korean Welding and Joining Society, Vol. 26, No. 1, pp. 9-11, 2008.   과학기술학회마을   DOI   ScienceOn
4 Kim, Y., Park, K. Y., and Lee, K. D., "Evaluation of Formability Depend on Aluminum Filler Wire to Make Lightweight Vehicle for MIG Welding Process," Journal of the Korean Welding and Joining Society, Vol. 29, No. 4, pp. 30-34, 2011.   과학기술학회마을   DOI   ScienceOn
5 Hong, J. P., Jung, S. H., Won, T. H., and Kwon, S. J., "A Study on Ultrasonic Welding System Design," The Korean Institute of Power Electronics annual conference, pp. 164-166, 2008.   과학기술학회마을
6 Kim, S. R., Lee, J. H., and Yoo, C. D., "Design of Cylinder Horn for Ultrasonic Welding," The Korean Welding and Joining Society, Vol. 27, No. 4, pp. 60- 66, 2009.   과학기술학회마을   DOI   ScienceOn
7 Jeong, H. S., "Fundamentals of Ultrasonic Welding," The Korean Welding and Joining Society, Vol. 15, No. 6, pp. 24-31, 1997.   과학기술학회마을
8 Yoon, J. W. and Lee, Y. S., "Study on the laser welds of 5052 and 6061 aluminum alloys," The research institute of industrial technology development, Vol. 17, pp. 161-167, 2003.
9 Lee, K. D., "Laser-Arc Hybrid Welding Process of Aluminum Alloy", The Korean Welding and Joining Society, Vol. 22, No. 2, pp. 23-27, 2004.   과학기술학회마을
10 Yan, S., Hong, Z., Watanabe, T., and Jingguo, T., "CW/PW dual-beam YAG laser welding of steel/aluminum alloy sheets," Optics and Lasers in Engineering, Vol. 48, No. 7-8, pp. 732-736, 2010.   DOI   ScienceOn
11 Huber, S., Merzkirch, M., Zaeh, M. F., and Schulze, V., "Applications of high-power diode lasers for aluminum welding," Proc. of Applications of highpower diode lasers for aluminum welding, Vol. 7198, Paper No. 71912, 2009.
12 Yoon, J. W., "Laser Welding of Aluminum Alloys," The Korean Welding and Joining Society, Vol. 18, No. 2, pp. 20-26, 2000.   과학기술학회마을
13 Kim, H. J., "A study on the optimum welding comdition of aluminium alloy materials by insert gas arc welding," M.Sc. Thesis, Dept. of Industrial Engineering, Ulsan Univ., 2002.
14 Kim, H. W., "System for hybrid cars," https://www. reseat.re.kr/Monitor1R.do?method=read.html
15 Kang, J. I., "Nd:YAG laser weldability of aluminum alloys," M.Sc. Thesis, Department of Advanced materials Engineering, Dong-Eui Univ., 2005.
16 Jung, D. Y., "Hybrid car battery technology trends," The Institute of Electronics Engineers of Korea, Vol. 34, No. 5, pp. 525-536, 2007.
17 Mathers, G., "The welding of aluminum and its alloys," Wood head Publishing Ltd. & CRC Press LLC, 1st Edition, pp.18-30, 2002.
18 Smith, W. F., "Structure and properties of engineering alloys," Mc Graw-Hill, 2nd Edition, pp. 1-40, 1994.
19 Park, H. S., "Arc and Laser Welding of Al Alloys for the Transportation Applications," Journal of the Korean Welding and Joining Society, Vol. 19, No. 2, pp. 5-13, 2001.
20 Heo, I. S., "A Study on the Welding Behavior of Al 3003 Alloy thin sheet by Nd:YAG Laser Beam," M.Sc. Thesis, Dept. of Metallurgy system Eng., Yonsei Univ., 2001.