Browse > Article

The Numerical Study on Breakup and Vaporization Process of GDI Spray under High-Temperature and High-Pressure Conditions  

심영삼 (부산대학교 기계공학과)
황순철 (부산대학교 기계공학)
김덕줄 (부산대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.12, no.3, 2004 , pp. 44-50 More about this Journal
Abstract
The purpose of this study is to improve the prediction ability of the atomization and vaporization processes of GDI spray under high-pressure and high-temperature conditions. Several models have been introduced and compared. The atomization process was modeled using hybrid breakup model that is composed of Conical Sheet Disintegration (CSD) model and Aerodynamically Progressed TAB(APTAB) model. The vaporization process was modeled using Spalding model, modified Spalding model and Abramzon ＆ Sirignano model. Exciplex fluorescence method was used for comparing the calculated with the experimental results. The experiment and calculation were performed at the ambient pressure of 0.5 MPa and 1.0 MPa and the ambient temperature of 473k. Comparison of caldulated and experimental spray characteristics was carried out and Abramzon ＆ Sirignano model and modified Spalding model had the better prediction ability for vaporization process than Spalding model.
Keywords
GDI; Equivalence ratio; Spray tip penetration; Vaporization model; Hybrid breakup model;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 KIVA-Ⅱ: A Computer Program for Chemically Reactive Flows with Sprays /
[ A.A.Amsden;T.D.Butler;P.J.O'Rourke ] / Los Alamos National Laboratory Report, LA-11560-MS.
2 Modeling the Effects of Intake Flow Structures on Fuel/Air Mixing in a Direct Injected Spark-Ignition Engine /
[ Z.Han;R.D.Reitz;P.J.Claybaker;C.J.Rutland ] / SAE 961192
3 Droplet Vaporization Model for Spray Combustion Calculation /
[ B.Abramzon;W.A.Sirignano ] / Int. J. Heat Mass Transfer   DOI   ScienceOn
4 A Study on Hybrid Breakup Models for Modeling of GDI Spray /
[ D.W.Kang ] / Master's Thesis, Pusan National University
5 Comparison of GDI Spray Prediction by Hybrid Model /
[ D.W.Kang;S.C.Hwang;D.J.Kim ] / Transactions of KSAE   과학기술학회마을
6 Fuel Jet Models for Multidimensional Diesel Combustion Calculation: An Update /
[ C.Beatrice;P.Belardini;C.Bertoli;M.C.Cameretti;N.C.Cirillo ] / SAE 950086
7 Aerodynamically Progressed Taylor Analogy Breakup(APTAB) Model for Accurate Prediction of Spray Droplet Deformation and Breakup /
[ J.H.Park;S.S.Hwang;Y.B.Yoon ] / ILASS-Korea
8 Modeling of Spray Atomization of Fuel Injector Using Hybrid Model /
[ S.W.Park;H.J.Kim;Y.Rhyu;C.S.Lee ] / Transactions of KSAE   과학기술학회마을
9 Fuel Spray Modeling of Outward-Opening Pintle Injectors /
[ C.O.Iyer;Z.Han ] / ILASS Americas, 15th Annual Conference on Liquid Atomization and Spray System
10 Characteristics of Spray Development from Vapor/Liqiud Phase Distribution for GDI Spray /
[ S.C.Hwang;D.S.Choi;D.J.Kim ] / Transactions of KSAE   과학기술학회마을
11 Spray Dynamics of High Pressure Fuel Injector for DI Gasoline Engines /
[ F.Zhao;J.Yoo;Y.Liu;M.Lai ] / SAE 961925
12 The Combustion of Liquids Fuel /
[ D.B.Spalding ] / Fourth Symposium (international) on Combusition
13 Effect of Ambient Conditions on Spray Behavior of Gasoline Injector /
[ C.S.Lee;K.H.Lee;S.C.Choi;S.I.Kwon ] / Transactions of KSAE   과학기술학회마을