|
1 |
Characteristics of HC Emissions by Starting Conditions in an SI Engine
김성수;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.1-9,
|
|
2 |
An Experimental Study on the Effect of Mixture Distribution in the Constant Volume Combustion Chamber on the Combustion Characteristics
이기형;이창희;안용흠;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.10-18,
|
|
3 |
A Study on the Combustion Characteristics of Lean Mixture by Radicals Induced Injection in a Constant Volume Combustor (2)
박종상;강병무;이명준;하종률;정성식;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.19-26,
|
|
4 |
A Study on the Performance Prediction of Automotive Water Pump with Double Discharge Single Suction
허형석;박경석;이기수;원종필;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.27-36,
|
|
5 |
The Effect of Engine Tilting Conditions on the Oil Supply System
전문수;김숭기;박병완;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.37-43,
|
|
6 |
The Numerical Study on Breakup and Vaporization Process of GDI Spray under High-Temperature and High-Pressure Conditions
심영삼;황순철;김덕줄;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.44-50,
|
|
7 |
An Optimization Technique for Diesel Engine Combustion Using a Micro Genetic Algorithm
김동광;조남효;차순창;조순호;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.51-58,
|
|
8 |
Numerical Study on the Effect of the Wall Curvature on the Behaviors of the Impinging Sprays
고권현;유홍선;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.59-65,
|
|
9 |
A Study on the Characteristics of DPF System of Peugeot 607 Diesel Passenger Car
김홍석;김진현;신동길;조규백;정용일;김강출;이영재;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.66-74,
|
|
10 |
A Study on the Ignition Characteristics at Constant Volume Combustion Chamber of LPG
박경석;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.75-82,
|
|
11 |
A Study on the NOx Removal in Multiple Plasma/Catalyst Combined Reactor
문승현;전상구;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.83-90,
|
|
12 |
A Study on the Development of Aluminum Seat Frame for Commercial Bus
우호광;이상복;김상범;김헌영;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.91-100,
|
|
13 |
The Shape Optimization of a Torque Converter Lock-up Clutch Using the B-Spline and Finite Element Mesh Smoothing
Hyun, Seok-Jeong;Kim, Cheol;Son, Jong-Ho;Shim, Se-Hyun;Jang, Jae-Duk;Joo, In-Sik;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.101-108,
|
|
14 |
Structure Borne Durability Design of a Vehicle Body Structure
김효식;임홍재;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.109-121,
|
|
15 |
A Study on FEM Analysis Method for Life Evaluation of Forging Steel
허선철;박영철;이동화;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.122-129,
|
|
16 |
A Study on the Structural Strength of the Rolling Stock Seat Frame
구정서;조현직;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.130-138,
|
|
17 |
A Study on the Plastic Zone of the Specimen at the Impact of Dynamic Load
한문식;조재웅;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.139-144,
|
|
18 |
Design of Ratio Control Valve for a Pressure Control Type CVT Using P-Line
류완식;이용준;김현수;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.145-151,
|
|
19 |
Characteristics of Fin-Side Heat-Transfer and Pressure Drop in a Condenser for Automobile
곽경민;이홍열;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.152-158,
|
|
20 |
Integration Control of Air-Cell Seat and Semi-active Suspension Using Sliding Perturbation Observer Design
유기성;윤정주;이민철;유완석;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.159-169,
|
|
21 |
Dynamic Characteristics Modeling for A MR Damper using Artifical Neural Network
백운경;이종석;손정현;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.170-176,
|
|
22 |
Numerical Simulation of OOP(Out-of-Position) Problem with Percentile Female F.E Model
나상진;최형연;이진희;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.177-183,
|
|
23 |
Development of an Inspection Machine for Automotive Oil-Seals Using Machine Vision
노병국;김도형;박용국;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.184-191,
|
|
24 |
Serration Behavior of AA5l82/Polypropylene/AA5182 Sandwich Sheets
김기주;신광선;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.192-203,
|
|
25 |
Characterization of the Material Properties of Sheet Metal for Auto-body at the High Strain Rate Considering the Pre-strain Effect
Kim, Seok-Bong;Lim, Ji-Ho;Huh, Hoon;Lim, Jong-Dae;
/
The Korean Society of Automotive Engineers
, v.12, no.3, pp.204-210,
|
|