|
| 1 |
Computational Study on the Application of Porous Media to Fluid Flow in Exhaust Gas Scrubbers
Hong, Jin-pyo;Yoon, Sang-hwan;Yoon, Hyeon-kyu;Kim, Lae-sung;An, Jun-tae;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.1-10,
|
|
| 2 |
Development Process for High Power Diode Laser for Metal Surface Hardening
Jang, Dong-Hwan;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.11-22,
|
|
| 3 |
Machining Evaluation of Carbide Drill and Cermet Reamer Using Polishing Media Based on Drag Finishing Process
Ha, Jeong-Ho;Sa, Min-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.23-30,
|
|
| 4 |
Structural Safety in Installation System for Monopile Basic Construction of Offshore Wind Power Generators
Cha, Tae-Hyeong;Chung, Won-Jee;Lee, Hyun-Jun;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.31-38,
|
|
| 5 |
Elimination of Roll Interference by Increasing Radius of Variable Section Forming Roll
Kim, Kwang-Heui;Yoon, Moon-Chul;Kwak, Jae-Seob;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.39-45,
|
|
| 6 |
Development of Solid State Relay(SSR) Life Prediction Device for Glass Forming Machine
Yang, Sung-Kyu;Kim, Gab-Soon;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.46-53,
|
|
| 7 |
Selecting Main Parts of a Four-Axis Palletizing Robot Through Dynamic Analysis of Rigid-Flexible Multibody Systems
Park, Il-Hwan;Go, A-Ra;Seol, Sang-Seok;Hong, Dae-Sun;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.54-63,
|
|
| 8 |
Effect of Shaft Misalignment on Bending Strength of Helical Gear for Metro Vehicles
Lee, Dong-Hyung;Choi, Don-Bum;Kang, Seong-Woong;Choi, Ha-Young;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.64-72,
|
|
| 9 |
Manufacture of Apparatus for Coolant Mix Performance Test
Ku, Hyoun-Kon;Bae, Young-Gwan;Kim, Jin-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.73-78,
|
|
| 10 |
Fabrication of Microfibrous Structures with Rolled-Up Forms using a Bilayer Self-Assembly Process
Kim, Yeong-Seo;Park, Suk-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.79-86,
|
|
| 11 |
A Study on Joining Technology of 3D Printed Metal-polymer Interlocking Structures Using an Induction Heating Process
Yuk, Ju-Chan;Kim, Yeong-Seo;Park, Suk-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.87-93,
|
|
| 12 |
Characteristics of Temperature Distribution of Wall, Floor, Air and Hot Water by Burying the Excel Pipe on the Floor and Wall of a Container House
Cho, Dong-Hyun;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.94-100,
|
|
| 13 |
Numerical Study on the Erosion Tendency of Centrifugal Slurry Pump Impeller for Thermal Power Plants
Cheon, Min-Woo;Lee, Chul-Hee;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.101-108,
|
|
| 14 |
Chromate Conversion Coating on 3D Printed Aluminum Alloys
Shin, Hong-Shik;Kim, Hyo-Tae;Kim, Ki-Seung;Choi, Hye-Yoon;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.109-115,
|
|
| 15 |
ANSYS®-Based Gear Stress Analysis of a Lightweight 3-DOF Wrist Mechanism for a Parallel Robot with Expanded Workspace
Park, Sang Hyeok;Chung, Won Jee;Hwang, Hui Geon;Kim, Hong Rok;Choi, Se Woong;Jee, Myeong Jun;Hong, Woo Cheol;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.116-122,
|
|
| 16 |
Selection of Optimal Processing Conditions for Quartz Using the Taguchi Method
Jeong, Ho-In;Choi, Seong-Jun;Lee, Choon-Man;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.123-129,
|
|
| 17 |
Multi-stage Cold Forging Process Design and Backward Extrusion Characteristics Evaluation of Serration Gear for Electronic Parking Brake
Seo, Ju-Han;Choi, Jong-Won;Jung, Eu-Enn;Kang, Myungchang;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.130-136,
|
|
| 18 |
Development of Machine Learning Method for Selection of Machining Conditions in Machining of 3D Printed Composite Material
Kim, Min-Jae;Kim, Dong-Hyeon;Lee, Choon-Man;
/
The Korean Society of Manufacturing Process Engineers
, v.21, no.2, pp.137-143,
|
|