|
| 1 |
Classification of Inverter Failure by Using Big Data and Machine Learning
Kim, Min-Seop;Shifat, Tanvir Alam;Hur, Jang-Wook;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.1-7,
|
|
| 2 |
The Effect of Amplitude, Event, and Duration of Electrical Stimulation on the Evacuation Velocity of Rodents: An Evacuation Experiment
Kim, Somi;Nguyen, Duyen Thi Hai;Park, Junyoung;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.8-15,
|
|
| 3 |
Fracture Characteristic of Double Cantilever Beam Specimen Using Lightweight Material at Sliding Mode
Kim, Jae-Won;Cho, Jae-Ung;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.16-23,
|
|
| 4 |
Comparison of the Characteristics of FCAW and SAW for the Brittle Crack Propagation of Welded Parts of BCA Steel in Container Ships
Choi, Kyung-Shin;Lee, Sang-Hoon;Choi, JeongJu;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.24-32,
|
|
| 5 |
Structural Design of Slope Correction Device
Kim, Jeong-Hwa;Lee, Do-Yeong;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.33-39,
|
|
| 6 |
Efficiency Improvement of Transfer Drive Gear Bearings for an Automotive Automatic Transmission
Lee, In Wook;Han, Sung Gil;Gwak, Beom-Seop;Lee, Ho Sung;Song, Chul Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.40-46,
|
|
| 7 |
Variation of Collection Efficiency with Turbulence Model in a Mini Cyclone for Collecting Automobile Brake Fine Dust
Han, Dong-Yeon;Lee, Young-Lim;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.47-52,
|
|
| 8 |
Enhancing the Mechanical Properties of Z-Spring by Implementing CF&GF Hybrid Prepreg Lamination Patterns
Kim, Jeong-Keun;Choi, Sun-Ho;Kim, Young-Keun;Kim, Hong-Gun;Kwac, Lee-Gu;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.53-59,
|
|
| 9 |
Finite Element Method Based Structural Analysis of Z-Spring with CF&GF Hybrid Prepreg Lamination Patterns
Kim, Jeong-Keun;Choi, Sun-Ho;Kim, Young-Keun;Kim, Hong-Gun;Kwac, Lee-Gu;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.60-67,
|
|
| 10 |
Optimization of the Durability Performance of a 17cc Automotive Compressor
Yang, Yong-Kun;Wu, Yu-Ting;Qin, Zhen;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.68-75,
|
|
| 11 |
Effect of Unbalance on Vibration and Machining of Al6061 Aluminum Alloy in Precision Rotator
Kim, Min Soo;Kim, Jung Tae;Park, Seok Woo;Jeong, Dong Uk;Choi, Sun Ho;Koo, Bon Heun;Yoon, Sang Hwan;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.76-82,
|
|
| 12 |
Analysis of Roller Load by Boom Length and Rotation Angle of a Crawler Crane
Lee, Deukki;Kang, Jungho;Kim, Taehyun;Oh, Chulkyu;Kim, Jongmin;Kim, Jongmyeong;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.83-91,
|
|
| 13 |
A Study of Effects of the Helical Angle Directions of Planetary Gear Sets on the Axial Forces on Thrust Bearings in an Automatic Transmission
Kwon, Hyun Sik;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.92-99,
|
|
| 14 |
Processing Method for the Laser Surface Treatment of Dental Implants
Yoo, Young-Tae;Choi, Byeong-Jae;Kim, Jin-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.100-106,
|
|
| 15 |
A Study of the Vibration of an Axial Flow Pump through FSI Analysis Method
Lee, Bo-Ram;Yun, Tae-Jong;Oh, Won-Bin;Lee, Chung-Woo;Kim, Hak Hyoung;Jeong, Yeong Jae;Kim, Ill-Soo;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.107-112,
|
|
| 16 |
Numerical Analysis on the Thermal Design of a Heat Exchanger for a Cold & Hot Water Mattress Equipped with Thermoelectric Modules
Yang, Ho-Dong;Park, Seul-Hyun;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.113-121,
|
|
| 17 |
Development of Microchip Removal Equipment Using Neodymium Permanent Magnets
Choi, Sung-Yun;Wang, Jun-hyeong;Wang, Duck Hyun;
/
The Korean Society of Manufacturing Process Engineers
, v.20, no.3, pp.122-128,
|
|