Browse > Article
http://dx.doi.org/10.14775/ksmpe.2019.18.4.093

Power Transmission Optimization Based on the Driving Gear of a Cross Drilling/Milling Unit using a Micro Geometry Method  

Kim, Dong-Seon (School of Mechanical & Aerospace Eng., ReCAPT, Gyeongsang national University,)
Zhen, Qin (School of Mechanical & Aerospace Eng., ReCAPT, Gyeongsang national University,)
Beak, Gwon-In (School of Mechanical & Aerospace Eng., ReCAPT, Gyeongsang national University,)
Wu, Yu-Ting (School of Mechanical & Aerospace Eng., ReCAPT, Gyeongsang national University,)
Jeon, Nam-Sul (Gyeumhwa Technology LTD, R&D Center)
Lyu, Sung Ki (School of Mechanical & Aerospace Eng., ReCAPT, Gyeongsang national University,)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.18, no.4, 2019 , pp. 93-99 More about this Journal
Abstract
A cross drilling/milling Unit is an important mechanical part which is widely used in many kinds of machining tool, and various gear trains with good accuracy and reliability features are widely used in power transmission systems. A study on a novel power transmission optimization method for driving gear trains in cross drilling/milling units is presented in this paper. A commercial program for gear system simulation, Romax Designer, was used in this research to intuitively observe the gear meshing and the load distribution conditions on the gear teeth. We obtained the optimal modification value through comparing the results of repeated experiments. For validation, optimized gears were fabricated and then measured with a precision tester.
Keywords
Cross Drilling/Milling Unit; Profile Error; Lead Error; Micro Geometry; Gear Train;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Kim, H. J., Experimental Study on Production Characteristics of Straight Bevel Gear using a Polyjet Method 3D Printer, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 63-68, 2015.   DOI
2 Jung, J. W., Kim, K. P., Ji, H. C., Moon, T. S., Design Improvement of the Driving Bevel Gear in Transmissions of a Tracked Vehicle, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 1-6, 2015.   DOI
3 Kim, N. K., Bae, K. Y., Kim, N. H., Jang, J. H., Development of Jig Type Chuck for Roundness improvement in a Machining of High Stage Speed Gear, Journal of the Korean Society of Manufacturing Process Engineers Vol. 15, No. 1, pp. 20-25, 2016.   DOI
4 Zhang, Q., Zhang, J., Yan, Y. L., Zhu, Q. W., Xu, Z. Z., Lyu, S. K., "A Study on the Design of a Gear Transmission Error Test Rig", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 14-19, 2016.   DOI
5 Kim, T. H., Jang, J. H., Lee, D. G., Kim, L. S., Lyu, S. K., Study on Optimal Design and Analysis of Worm Gear Reducer for High Place Operation Car, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 98-103, 2015.   DOI
6 Zhang, Q., Zhang, J., Zhu, Z. G., Wang, Z. R., Xu, Z. Z., "Study on the Transmission Error Prediction for a Spur Gear Pair", J. Korean Soc. Precis. Eng., Vol. 33, No. 2, pp. 109-114, 2016.   DOI
7 Zhang, Q., Wang, G. H., Lyu., S. K., "Study on Empirical Gear Profile Micro-modifications for Gear Transmission", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 54-62, 2017.   DOI