|
| 1 |
Durability Evaluation Method of Handling Structure using Hand Calculation and Simulation
Cho, Sung-Min;Bang, Hyo-Jung;Kang, Byung-Ik;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.1-9,
|
|
| 2 |
Robust Steering Control with Side Slip and Yaw Damping Compensation Using Time Delay Control
Lee, Seon Bong;Choi, Hae Woon;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.10-15,
|
|
| 3 |
Experimental Study on the Drawbar Pull and Structural Safety of an Onion Harvester Attached to a Tractor
Shin, Chang-Seop;Kim, Jun-Hee;Ha, Yu-Shin;Park, Tusan;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.16-25,
|
|
| 4 |
Thermal and Flow Analysis of Organic Rankine Cycle System Pipe Line for 250 kW Grade Waste Gas Heat Recovery
Kim, Kyoung Su;Bang, Se Kyoung;Seo, In Ho;Lee, Sang Yun;Yi, Chung Seob;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.26-33,
|
|
| 5 |
Shape Optimal Design of Anti-vibration Rubber Assembly in Tractor Cabin Using Taguchi Method
Seo, Ji-Hwan;Lee, Boo-Yoon;Lee, Sanghoon;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.34-40,
|
|
| 6 |
Prediction of Thermal Expansion Coefficients using the Second Phase Fraction and Void of Al-AlN Composites Manufactured by Gas Reaction Method
Yoon, Juil;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.41-47,
|
|
| 7 |
Design Analysis of Substructure for Offshore Wind Pile Excavation
Lee, Gi-Ok;Sun, Min-Young;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.48-55,
|
|
| 8 |
A Motion Analysis Study of Casers for Fish Boxes using Computer Simulation
Jung, Sung-Heon;Jun, Chul-Woong;Sohn, Jeong-Hyun;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.56-61,
|
|
| 9 |
Structural Analysis of a Carriage Shuttle System : A Material Supply Device for Small-Scale Machine Tools
Kang, Dae-Sung;Jung, Eun Ik;Kim, Kyung-Heui;Baek, Il-Cheon;Yi, Chung-Seob;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.62-68,
|
|
| 10 |
Evaluation of the Grinding Performance of an Engine Block Honing Stone through Monitoring of Workload and Heat Generation
Yun, Jang-Woo;Kim, Sang-Beom;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.69-75,
|
|
| 11 |
Computational Analysis of an Inverted-type Cross-flow Turbine for Ultra-low head Conditions
Ham, Sangwoo;Ha, Hojin;Lee, Jeong Wan;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.76-86,
|
|
| 12 |
A Study on the Culture Media Control of Smart Plant Cultivator
Jeong, Sang-Hwa;Yoon, Chung-Man;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.87-92,
|
|
| 13 |
Power Transmission Optimization Based on the Driving Gear of a Cross Drilling/Milling Unit using a Micro Geometry Method
Kim, Dong-Seon;Zhen, Qin;Beak, Gwon-In;Wu, Yu-Ting;Jeon, Nam-Sul;Lyu, Sung Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.93-99,
|
|
| 14 |
Development of New Stacked Element Piezoelectric Polyvinylidene Fluoride Pressure Sensor for Simultaneous Heartbeat and Respiration Measurements
Park, Chang-Yong;Kweon, Hyun-Kyu;Lee, So-Jin;Manh, Long-Nguyen;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.100-108,
|
|
| 15 |
Effect of Thermal Pressing Temperature on the Mechanical and Material Properties of Electro-spun Polyacrylonitrile Nano-fibrous Separator
Kim, Minchoel;Ko, Tae Jo;Arifeen, Waqas Ul;Dong, Ting;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.4, pp.109-116,
|
|