|
1 |
Durability Study by Strength Analysis of Bicycle Handle
Han, Moonsik;Cho, Jaeung;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.1-7,
|
|
2 |
Spray Pattern Analysis for a Centrifugal Fertilizer Distributor with Two Shutter Holes
Hwang, Seok-Joon;Park, Jeong-Hyeon;Lee, Ju-Yeon;Kim, Ki-Duck;Shin, Beom-Soo;Nam, Ju-Seok;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.8-19,
|
|
3 |
A Study on Cooling Systems with Cold Water Panels in the Walls of Small Buildings
Cho, Dong-Hyun;Jo, Myeong-Gi;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.20-26,
|
|
4 |
A Study on Effect of Tool Wear Rate upon Cutting Tool Shape in a Titanium Rough Cut Machining
Jung, Hwa;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.27-33,
|
|
5 |
Robust Design of an Injection Molding Process Considering Integrated Desirability
Kim, Kyung-Mo;Park, Jong-Cheon;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.34-41,
|
|
6 |
Prediction of Surface Roughness in Hole Machining Using an Endmill
Chun, Se-Ho;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.42-47,
|
|
7 |
The Causes of Bolt Breakage During the Tightening of Impellers in Water Jet Propulsion Systems
Jung, Sang-Jin;Oh, Shini Il;Hur, Jang-Wook;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.48-53,
|
|
8 |
The Optimal Design of Wear Pads for the Final Reduction Drive in Tactical Vehicles
Shin, Hunyong;Lee, Yong-Jun;Ryu, Jungmin;Kang, Taewoo;Oh, Dae-san;Sim, Jungwook;Shin, Minsu;Son, Kwon-il;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.54-59,
|
|
9 |
Optimization of Machining Conditions in Milling of Titanium Alloy (Ti-6A1-4V) Using the Response Surface Method
Kim, Jong-Min;Koo, Joon-Young;Kim, Jeong-Suk;Jun, Cha-Soo;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.60-67,
|
|
10 |
Study on Structural Reliability Assessment of a Partition Panel Made of a CFRP(Carbon Fiber Reinforced Plastic)
Lee, Jaejin;Mun, Jihun;Yoon, Wonho;Kang, Dakyung;Ahn, Minsu;Roh, Hyungjin;Kang, Jiheon;Lee, Jaewook;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.68-74,
|
|
11 |
Cutting Force Estimation Considering the Specific Cutting Force Constant
Kim, Jong-Do;Yoon, Moon-Chul;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.75-82,
|
|
12 |
Numerical Study on Submersible Pumps with a Vortex Reduction Function
Ahn, Deog-Inn;Kim, Hong-gun;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.83-92,
|
|
13 |
A Study on the Preheating Effect of Multi-Heat Sources using Laser Plasma in the Thermally Assisted Machining of a High-Melting-Point Material
Lee, Choon-Man;Kim, Seong-Gyu;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.93-98,
|
|
14 |
A Study on Three-Phase Separation Efficiency according to the Diffusion Plate of a High-Speed Centrifugal Separator
Lee, Choon-Man;Jeong, Ho-In;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.99-103,
|
|
15 |
3D Printing Characteristics of Automotive Hub using 3D Scanner and Reverse Engineering
Kim, Hae-Ji;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.104-109,
|
|
16 |
Development of Blade Surface Modeling System Using Point Data
Kim, Yeoung-Il;
/
The Korean Society of Manufacturing Process Engineers
, v.18, no.10, pp.110-115,
|
|