|
1 |
Technology for Roll-based Nanoimprint Lithography Systems
Lim, Hyungjun;Lee, Jaejong;Choi, Kee-Bong;Kim, Geehong;Lee, Sunghwi;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.1-8,
|
|
2 |
Analysis of Thermal Effect on Tension of a Moving Web in Roll-to-Roll Printed Electronics
Lee, Jong-Su;Lee, Chang-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.9-15,
|
|
3 |
Fabrication of Two-dimensional Photonic Crystal by Roll-to-Roll Nanoreplication
Kim, Young-Kyu;Byeon, Euihyeon;Jang, Ho-Young;Kim, Seok-Min;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.16-22,
|
|
4 |
A Statistical Analysis for Slot-die Coating Process in Roll-to-roll Printed Electronics
Park, Janghoon;Lee, Changwoo;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.23-29,
|
|
5 |
Technology for Efficiency Enhancement of Crystalline Si Solar Cell using Nano Imprint Process
Cho, Young Tae;Jung, Yoon Gyo;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.30-35,
|
|
6 |
The Effects on a Side-Cut Grinding depend on the Change of the Quill Rigidity
Choi, Hwan;Kim, Chang-Su;Park, Won-Kyue;Lee, Choong-Seok;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.36-41,
|
|
7 |
Study for Retardation Phenomenon
Kang, Yong-Goo;Lee, Tae-Won;Kim, Dong-Myung;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.42-49,
|
|
8 |
A Study on the Modal Analysis of Hybrid Vertical Grinding System Bed
Choi, Seung-Geon;Kim, Seong-Hyun;Choi, Woong-Kirl;Shin, Hyun-Jung;Lee, Eun-Sang;Kim, Kyu-Dong;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.50-56,
|
|
9 |
Structural Analysis on Flange Coupling due to Change of Bolt Numbers
Han, Moonsik;Cho, Jaeung;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.57-66,
|
|
10 |
Numerical analysis on the inner flow characteristic for small smoke collector
Jang, Sung Cheol;Woong, Kim Jae;Yi, Chung Seob;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.67-75,
|
|
11 |
Study on Relation between Surface Roughness and Heat Absorption Capability of Materials for Solar Collector
Chun, Tae-Kyu;Ahn, Young-Chull;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.76-85,
|
|
12 |
A study on Press Forming Machine of Titanium and Aluminium Plates Formability
Jung, Won-Jae;Kang, Han-Bin;Lee, Dong-Wook;Park, Min-Hyeok;Song, Ju-Han;Lee, Seok-Soon;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.86-93,
|
|
13 |
Experimental Study on implementation of injection molding process for speaker frame in LED TV
Lee, Sun Kon;Kim, Sang Hyun;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.94-101,
|
|
14 |
Numerical Analysis on the Characteristic of Thermal Distribution for High Temperature Operating Battery Module
Yi, Chung Seob;Lee, Byung Ho;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.102-108,
|
|
15 |
Structural analysis and wearability evaluation of a vehicle's swash plate A/C compressor
Kim, Jin-Woo;Ha, Sun-Ho;Kim, Sang-Jin;Kim, Chang-Uk;Song, Jung-Il;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.109-115,
|
|
16 |
A Study on Development of High Speed Deburring Machine
Koo, Ja-Ham;Kim, In-Hwan;Hur, Nam-Soo;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.116-121,
|
|
17 |
The Study of the Fabrication of the Ultra-Precision Cylinder by the Compensation Process
Lee, Jung-Chul;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.122-128,
|
|
18 |
A Study on Characteristics of Cutting Tool Wear by Cooling Method in Rough Machining of Titanium Alloy
Kim, Gee-Hah;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.129-134,
|
|
19 |
Design Improvement and Performance Evaluation of 20kHz Horn for Ultrasonic Cutting
Seo, Jeong Seok;Lee, Yoon Jeong;Kim, Jin Wook;Park, Dong Sam;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.135-140,
|
|
20 |
Development of a 3-D Position Measurement Algorithm using 2-D Image Information
Lee, J.H.;Jung, S.H.;Kim, D.H.;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.141-148,
|
|
21 |
Study on Performance Comparison for Solar Collectors with Single Evacuated Tube using Surface Treatment and Commercial Double Evacuated Tube
Chun, Tae-Kyu;Yang, Young-Joon;Lee, Kyung-Hee;Ahn, Young-Chull;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.149-156,
|
|
22 |
Fractal analysis of acceleration signal considering damping
Yoon, Moon-Chul;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.157-162,
|
|
23 |
Development on unmanned automated system at hot Forging work
Jung, Sung-Ho;Lee, Jun-Ho;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.163-169,
|
|
24 |
An Experimental Study on the Effect of Temperature and Humidity on the Pressure Change of the Bootstrap type Reservoir in the Aircraft
Kim, Jung-Sik;Yu, Han-Sik;Park, Dong-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.12, no.5, pp.170-175,
|
|