|
| 1 |
An Analysis on the Tooth Passing Frequency using End-milling Force
Kim, Jong-Do;Yoon, Moon-Chul;Cho, Hyun-Deog;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.1-7,
|
|
| 2 |
Coupled Bending and Torsional Vibrations Analysis of Cracked L-shaped Beam
Son, In-Soo;Kim, Chang-Ho;Cho, Jeong-Rae;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.8-15,
|
|
| 3 |
Dynamic Analysis of Impact Force Alleviation of Industrial Folding-type Automatic Door on Guide Rail
Yun, Seong-Ho;Park, Jong-Cheon;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.16-21,
|
|
| 4 |
Study on the Vibration Analysis of Damper Clutch Spring
Cho, Jae-Ung;Han, Moon-Sik;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.22-30,
|
|
| 5 |
Sloshing Analysis of a Simple Tank using Fluid-structure Interface Method
Kang, Sung-Jong;Seo, Hong-Jae;Kim, Byung-Joo;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.31-37,
|
|
| 6 |
The Effect of Addendum Modification Coefficient on Gear Strength to Planetary Gear Reducer
Kwak, Ki-Suk;Han, Dong-Seop;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.38-43,
|
|
| 7 |
Compensation of Relation Formula between Luffing Wire Tension and Overturning Moment in a Crawler Crane Considering the Deflection of Boom
Jang, Hyo-Pil;Han, Dong-Seop;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.44-49,
|
|
| 8 |
Development of the Injection Molded Ball Seat for Automobile Suspension
Ye, Sang-Don;Min, Byeong-Hyeon;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.50-56,
|
|
| 9 |
FEM Analysis of Turning Multi-layer Metal
Kim, Key-Sun;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.57-63,
|
|
| 10 |
Optimization for Friction Welding of AZ31 Mg Alloy by Design of Experiments
Kang, Dae-Min;Kwak, Jae-Seob;Choi, Jong-Whan;Park, Kyeong-Do;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.64-69,
|
|
| 11 |
A Study on Optimization of Tooth Micro-geometry for a Helical Gear Pair
Zhang, Qi;Kang, Jae-Hwa;Lyu, Sung-Ki;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.70-75,
|
|
| 12 |
Prediction of State of Cutting Surfaces of Polymers by Analysis of Indentation Load-depth Curve
Jeon, Eun-Chae;Kim, Jae-Hyun;Je, Tae-Jin;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.76-81,
|
|
| 13 |
A Study on the Optimal Cutting Condition in Boring using MQL System
Han, Dong-Yong;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.82-87,
|
|
| 14 |
Structural Analysis on Durability of Pedal
Cho, Jae-Ung;Han, Moon-Sik;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.88-95,
|
|
| 15 |
Evaluation for Thin Films Characteristics of Nitride Titanium-Chromium using Arc Ion Plating
Fujita, Kazuhisa;Yang, Young-Joon;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.96-101,
|
|
| 16 |
Motion Control of the Precise Stage using Piezoelectric Actuator
Kim, In-Soo;Kim, Yeung-Shik;Hwang, Yun-Sik;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.102-108,
|
|
| 17 |
Development of CAM Automation Module(E-ICAM) for 5-axis Machining of Impeller (A Study on Configuration of Module)
Jung, Hyoun-Chul;Hwang, Jong-Dae;Jung, Yoon-Gyo;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.109-114,
|
|
| 18 |
A Study on Numerical Analysis for Flow Characteristics in Ribbed Tube
Jeon, Jeong-Do;Jeon, Eon-Chan;Jeung, Hui-Gyun;Lee, Chi-Woo;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.115-120,
|
|
| 19 |
Development of Tube End-forming Process using Roll Die
Kim, Yeong-Hwan;
/
The Korean Society of Manufacturing Process Engineers
, v.10, no.4, pp.121-126,
|
|