Browse > Article

Development of Fitting Process for Extra Long Stainless/Composite Material Pipes  

Park, S.H. (창원대학교 기계설계공학과 대학원)
Lee, C.M. (창원대학교 기계설계공학과)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.17, no.2, 2008 , pp. 77-82 More about this Journal
Abstract
Rubbing-roller is used for manufacturing liquid crystal display, and static displacement of the rubbing-roller becomes bigger as length of the rubbing roller made of aluminum is getting longer. Therefore, material of the rubbing-roller is changed from aluminum to CFRP(Carbon Fiber Reinforced plastic). Recently thermal spraying is applied to manufacturing process of long rubbing-roller. The thermal spraying has disadvantages such as increment of manufacturing time and fraction defective caused by density of stainless steel particle. In this study, fitting process by drawing was suggested and FEM analysis with Tsai-Wu failure theory and fitting experiments are carried out to find adequate shrink allowance. The suggested shrink allowance gives proper adhesive force, and CFRP failure is not occurred. Furthermore, the fitting process is applied to long rubbing-roller and availability of the fitting process is studied by measurement of roundness, straightness and shear strength.
Keywords
Stainless Pipe; Composite Material Pipe; Drawing; Thermal Spraying; Shrink Allowance;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kim, H. S., Kim, B. M., Jo, H. H., and H. Jo., 2004, "Finite Element Analysis of Copper Clad Steel Wire Drawing Process," Journal of KSTP, Vol. 14, No. 2, pp. 147-152
2 Lee, S. K., Hwang, W. H., Kim, B. M., and Bae, C. M., 2005, "Influence of Process Parameters on Residual Stress and Reducing Residual Stress in Drawn Wire," Journal of KSTP, Vol. 14, No. 8, pp. 704-711
3 Yoh, E. G. and Kim, Y. R., 1999, "A study on the Prediction of Fatigue Life in Dissimilar Materials Die Considering the Heat Shrink Fit," Spring Conference of KSMTE, pp. 93-98
4 Park, S. H., 2007, "A study on Reduction Distribution in Tube Drawing Process," Dissertation for the Degree of Master, Changwon National University, Republic of Korea
5 Choi, S. H. and Kim, C. K., 1996, "Characteristics of the shrink fit strength using ceramic shaft and metal ring," Fall Conference of KSMTE, pp. 180-186
6 Choi, S. H. and Kim, C. K., 1996, "Characteristics of the shrink fit strength using ceramic shaft and metal ring," Fall Conference of KSMTE, pp. 180-186
7 Lee, D. H., Kim, D. W., Kim, D. H., and Moon, H., 2004, "A study on Reduction Distribution in Tube Drawing Process," Spring Conference of KSTP, pp. 35-38
8 Hwang, W. H., Kim, B. M., and Kim, W. Y., 2004, "Analysis of drawing process of the Al-Si wire using FEM," Fall Conference of KSTP, pp. 89-92
9 Choi, J. H., Chun, Y. J., and Kweon, J. H., 2002, "A Study on the strength of mechanically fastened composite joint," Journal of Composite Materials, Vol. 15, No. 4, pp. 9-16
10 Park, S. H., Lee, C. M., Chung, W. J., and Park, D. G., 2007, "A Study on the Shrink Fit for Long Pipes of Different Materials," Spring Conference of KSPE, pp. 629-630
11 Jo, I. G., Park, J. S., and Lee, S. Y., 1995, "Finite Element Wound Composite Pipes and Flanges," Journal of KSAS, Vol. 24, No. 1, pp. 88-94
12 Im, K. H., Park, N. S., and Yang, I. Y., 1996, "Effects of Hygrothermals on Residual Fatigue Bending Strngth of CFRP Laminates," Fall Conference of KSAE, pp. 505-511
13 Choi, S. H. and Kang, S. C., 2005, "Adhesion between the Nylon Cylinder and Steel Shaft by Expansion Fit and Induction Heating," Journal of KSPE, Vol. 22, No. 2, pp. 139-147   과학기술학회마을