|
1 |
The Study on the Machining Characteristics of 300mm Wafer Polishing for Optimal Machining Condition
Won, Jong-Koo;Lee, Jung-Taik;Lee, Eun-Sang;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.1-6,
|
|
2 |
Model Updating of High-Speed Spindle
Park, Ki-Beom;Chung, Won-Jee;Lee, Choon-Man;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.7-12,
|
|
3 |
3-DOF Parallel Micromanipulator : Design Consideration
Lee, Jeong-Ick;Lee, Dong-Chan;Han, Chang-Soo;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.13-22,
|
|
4 |
Finite Element Analysis on Contact and Work Stress of Rolled Strip
Cho, Jae-Ung;Han, Moon-Sik;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.23-29,
|
|
5 |
Estimation and Analysis of Transport Direction according to Traveling Wave in Ultrasonic Transport System
Jeong, Sang-Hwa;Kim, Gwang-Ho;Shin, Sang-Moon;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.30-37,
|
|
6 |
Turning Characteristics of Various Tool Materials in the Machining of Ti-6Al-4V
Choi, Jong-Guen;Kim, Hyung-Sun;Chung, Jin-Oh;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.38-44,
|
|
7 |
Simulation of Molecular Flows Inside a Guide Block in the OLED Deposition Process
Sung, Jae-Yong;Lee, Eung-Ki;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.45-50,
|
|
8 |
A Study on the Machinability of Micro-Channel
Hong, Min-Sung;Kim, Jong-Min;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.51-57,
|
|
9 |
Influence of Chucking Forces upon the Accuracy of Circular Hole in Boring Process on the Turning
Lee, Sang-Soo;Kang, Shin-Gil;Jeon, Young-Seog;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.58-64,
|
|
10 |
A Study on the Mechanical Properties as a Result of Friction Welding With SKH55 and SM45C
Choi, Su-Hyun;Min, Byung-Hoon;Kim, Noh-Kyung;Lim, Hyung-Taek;Min, Taeg-Ki;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.65-70,
|
|
11 |
Effects of Machining Conditions for Improvement of Surface Roughness on Micro End-Milling
Cho, Byoung-Moo;Kim, Sang-Jin;Park, Hee-Sang;Bae, Myung-Il;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.71-76,
|
|
12 |
Development of Fitting Process for Extra Long Stainless/Composite Material Pipes
Park, S.H.;Lee, C.M.;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.77-82,
|
|
13 |
Dynamic Modeling and Input Shaping Control of a Positioning Stage
Park, S.W.;Hong, S.W.;Choi, H.S.;Jang, J.W.;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.83-89,
|
|
14 |
Displacement Control of Pneumatic Actuator Equipped with PLC and Proximity Sensors
Kim, Gun-Hoi;So, Jung-Duck;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.90-96,
|
|
15 |
Effect of Metal Powders on the Conductivity of Conductive Inks
Kwon, Doo-Hyo;Jeong, Tae-Eui;Kim, Nam-Soo;Han, Kenneth-N.;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.97-103,
|
|
16 |
Optimal Design of the 6th Generation LCD Glass Using the Taguchi Method
Cho, Woong;Song, Chun-Sam;Kim, Jong-Hyeong;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.104-109,
|
|
17 |
Composite Embedded capacitors in Multilayer Printed Circuit Board
You, Hee-Wook;Park, Yong-Jun;Koh, Jung-Hyuk;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.110-113,
|
|
18 |
Design of the Radial Extrusion Process for the General-Purpose Flange Using Model Material
Lee, Sang-Don;Byon, Sung-Kwang;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.114-120,
|
|
19 |
Machining Error Compensation for Tool Deflection in Micro Slot-Cutting Processes for Fabrication of Micro Shapes
Sohn, Jong-In;Yoon, Gil-Sang;Seo, Tae-Il;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.121-127,
|
|
20 |
A Study of Machining Error Compensation for Tool Deflection in Side-Cutting Processes using Micro End-mill
Jeon, Du-Seong;Seo, Tae-Il;Yoon, Gil-Sang;
/
The Korean Society of Manufacturing Technology Engineers
, v.17, no.2, pp.128-134,
|
|