|
1 |
Statistical Analysis for Thickness and Surface Roughness of Printed Pattern in Roll-to-Roll Printed Electronics System
Lee, Chang Woo;Kim, Nam Seok;Kim, Chang Wan;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.287-294,
|
|
2 |
Dimensional Change in Drawn Wire Product in the Two Cross-Roll Straightening Process
Moon, Changsun;Kim, Naksoo;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.295-302,
|
|
3 |
Dynamic Analysis of Driving Mechanism for Displacement Controlled Automatic Drug Injector
Shin, Young Kyu;Han, Nam Gyu;Tak, Tae Oh;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.303-311,
|
|
4 |
Characteristic of EP-MAP for Deburring of Microgroove using EP-MAP
Kim, Sang Oh;Son, Chul Bae;Kwak, Jae Seob;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.313-318,
|
|
5 |
Study on Characteristics of EP-MAP Hybrid Machining by Optimization of Magnetic Flux Density
Park, Chang Geun;Kwak, Jae Seob;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.319-324,
|
|
6 |
Low Frequency Squeal Noise Reduction using Mode Participation Factor in Complex Eigenvalue Analysis
Park, Jeong Min;Kim, Hyun Soo;Yoon, Moon Young;Boo, Kwang Seok;Kim, Heung Seob;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.325-331,
|
|
7 |
Fatigue Characteristics and Compressive Residual Stress of Shot Peened Alloy 600 Under High Temperature
Kim, Jong Cheon;Cho, Hong Seok;Cheong, Seong Kyun;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.333-338,
|
|
8 |
Study on Fatigue Characteristic of Suspension Part Using Hot Forming
Suh, Chang Hee;Park, Myung Kyu;Park, Jong Kyu;Kim, Young Suk;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.339-344,
|
|
9 |
Influence of Stress Shape Function on Analysis of Contact Problem Using Hybrid Photoelasticity
Shin, Dong-Chul;Hawong, Jai-Sug;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.345-352,
|
|
10 |
Change in Ultrasonic Characteristics with Isothermal Heat Treatment of 2.25Cr-1Mo Steel
Nam, Young-Hyun;Baek, Un-Bong;Park, Jong-Seo;Nahm, Seung-Hoon;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.353-358,
|
|
11 |
Design and Analysis of Linear Vibration Motor Equipped with Permanent-Magnet Springs and Voice-Coil Actuators
Choi, Jung-Kyu;Yoo, Seong-Yeol;Noh, Myounggyu;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.359-364,
|
|
12 |
Statistical Analysis for Fatigue Life Evaluation of Vehicle Muffler
Choi, Ji-Hun;Lee, Yong-Jun;Yoon, Jin-Ho;Kang, Sung-Su;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.365-372,
|
|
13 |
Study on Friction Characteristic of Sintered Friction Component for Synchronizer-Ring of Diesel Vehicle
Song, Joon Hyuk;Kim, Eun Sung;Kim, Kyung-Jae;Oh, Je-Ha;Yang, Sung Mo;Kang, Shin Jae;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.373-378,
|
|
14 |
Steering System Design of Commercial Vehicle for Improving Pulling Phenomenon During Braking
Lee, Chang Hun;Lee, Dong Wook;Lee, Yong Su;Sohn, Jeong Hyun;Kim, Kwang Suk;Yoo, Wan Suk;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.379-385,
|
|
15 |
Sensitivity Analysis of Nozzle Geometry Variables for Estimating Residual Stress in RPV CRDM Penetration Nozzle
Bae, Hong Yeol;Oh, Chang Young;Kim, Yun Jae;Kim, Kwon Hee;Chae, Soo Won;Kim, Ju Hee;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.387-395,
|
|
16 |
Optimization of Battery Power Distribution to Improve Fuel Consumption of Fuel Cell Hybrid Vehicle
Lee, Dong Sup;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.397-403,
|
|
17 |
Prediction of Steady-State Stresses within Heat Affected Zone Due to Creep Mismatch in Welded Straight Pipes
Han, Jae-Jun;Kim, Sang-Hyun;Chung, Jin-Taek;Kim, Yun-Jae;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.405-412,
|
|
18 |
Vibration Pattern Design Method for Improving Tactile Sensibility
Kim, Sungmin;Lee, Soo-Hong;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.413-418,
|
|
19 |
Development of Program for Predicting GBD to Improve Canning Process Capability for Catalytic Converter
Lee, Young Dae;Chu, Seok Jae;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.419-427,
|
|
20 |
Probabilistic Analysis of Fatigue Behavior of Induction Hardened Steel
Lee, Seon-Ho;Lee, Seung-Pyo;Kang, Ki Weon;
/
The Korean Society of Mechanical Engineers
, v.37, no.3, pp.429-436,
|
|