|
1 |
Forensic Engineering Study on Damage Assessment of the Damage to the Internal Parts of a Vehicle Involved in a Fire Accident
Kim, Eui-Soo;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.255-261,
|
|
2 |
Influence of Micro Pattern Geometry and Printing and Curing Conditions in Gravure Printing on Printing Performance When Using Conductive Ink
Ahn, Byoung-Joon;Han, Kyung-Joon;Ko, Sung-Lim;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.263-271,
|
|
3 |
Lifetime Estimation of an Axle Drive Shaft by Calibrated Accelerated Life Test Method
Kim, Do-Sik;Kim, Hyoung-Eui;Yoon, Sung-Han;Kang, E-Sok;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.273-281,
|
|
4 |
Optimal Design of Magnetically Levitated Flywheel Energy Storage System Based on System Stability Using Rigid-Body Model
Kim, Jung-Wan;Yoo, Seong-Yeol;Bae, Yong-Chae;Noh, Myoung-Gyu;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.283-289,
|
|
5 |
Design and Performance Evaluation of Dimpled EGR Cooler
Seo, Young-Ho;Lee, Hyun-Min;Heo, Seong-Chan;Ku, Tae-Wan;Song, Woo-Jin;Kang, Beom-Soo;Kim, Jeong;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.291-298,
|
|
6 |
Study of Flexible Forming Process Involving the Use of Sectional Flexible Die for Sheet Material
Heo, Seong-Chan;Ku, Tae-Wan;Song, Woo-Jin;Kim, Jeong;Kang, Beom-Soo;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.299-305,
|
|
7 |
Shape Design of Bends in District Heating Pipe System by Taguchi Method
Choi, Moon-Deok;Kim, Joo-Yong;Ko, Hyun-Il;Cho, Chong-Du;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.307-313,
|
|
8 |
Effects of Corrosion Behavior on Failure of Co-Cured Single Lap Joints Subjected to Cyclic Tensile Loads
Shin, Kum-Cheol;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.315-321,
|
|
9 |
3D FE Model with FEA Factors and Plastic Shots for Residual Stress Under Oblique Shot Peening
Lee, Bae-Hwa;Kim, Tae-Hyung;Lee, Hyung-Yil;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.323-331,
|
|
10 |
Evaluation of Mechanical Properties of Alloy 82/182 Weld Joint Between SA508 Gr.3 Nozzle and F316L Safe-End
Kim, Jin-Weon;Lee, Kyung-Soo;Park, Chi-Yong;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.333-340,
|
|
11 |
Effect of Specimen Geometry on Bending and Tensile Strength of Material Used in Dissimilar Joints
Hur, Jang-Wook;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.341-346,
|
|
12 |
Prediction of the Unwinding Performance of Optical Fiber Cables by Nonlinear Dynamics Analysis
Lee, Jae-Wook;Kim, Kun-Woo;Kim, Hyung-Ryul;Yoo, Wan-Suk;An, Deuk-Man;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.347-352,
|
|
13 |
Optimal Design of Lightweight Frame for Heavy Flat-Bed Trailer by Using Taguchi Method
Kim, Jin-Gon;Yoon, Min-Su;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.353-359,
|
|
14 |
Study of Factor Causing Wear of a Barrel Cam in a Paper-Cup-Forming Machine by Using Multibody Dynamics Model
Jun, Kab-Jin;Park, Tae-Won;Cheong, Kwang-Yeil;Kim, Young-Guk;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.361-367,
|
|
15 |
Position Control of Linear Motor by Using Enhanced Cross-Coupling Algorithm
Han, Sang-Oh;Huh, Kun-Soo;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.369-374,
|
|
16 |
Prediction of Residual Stress Caused by IML Process and Deformation Due to Thermal Impact
Lee, Jae-Won;Jang, Eu-Gene;Shin, Seung-Won;Park, Seung-Ho;Chung, Ha-Seung;
/
The Korean Society of Mechanical Engineers
, v.34, no.3, pp.375-382,
|
|