Browse > Article
http://dx.doi.org/10.3795/KSME-A.2010.34.10.1479

Prediction of Axial Residual Stress in Drawn High-Carbon Wire Resulting Due to Increase in Surface Temperature  

Kim, Dae-Woon (School of Precision Manufacturing System Division, Pusan Nat'l Univ.)
Lee, Sang-Kon (PNU-IFAM JRC, Pusan Nat'l Univ.)
Kim, Byung-Min (School of Mechanical Engineering, Pusan Nat'l Univ.)
Jung, Jin-Young (Technical Development Center, KISWIRE)
Ban, Deok-Young (Technical Development Center, KISWIRE)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.34, no.10, 2010 , pp. 1479-1485 More about this Journal
Abstract
In recent times, due to wire drawing of high carbon steel at a high speed to ensure a high productivity and high strength, axial residual stress are generated because of rapid increase in surface temperature. In the process, the temperatures of the wires increased because of the deformation of the wires and the friction between the die and wire. In particular, in the case of the wire drawing at a high speed, friction leads to a large temperature gradient so that considerable axial residual stress is generated on the surface. In this study, the relationship between axial residual stress and increase in the surface temperature was investigated, and a prediction model of uniform temperature was proposed. Then, a prediction model for residual stress was developed. The proposed model was verified by measuring the residual stress by X-ray diffraction on drawn wires.
Keywords
High Carbon Steel; Multi-Pass Wire Drawing; Surface Temperature; Axial Residual Stress;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Alexander Geleji, 1960, Bildsame Formung der Mettale in Rechnung und Versuch, Akademie-Verlag, GmbH.BERLIN.
2 Dinesh, D. B. and Jeffrey, L. S., 2009, “A Method for Obtaining the Temperature Distribution at the Interface of Sliding Bodies,” Wear, Vol. 226, pp. 721-732.
3 Frank P. Incropera and David P. Dewitt, 1996, Fundamentals of Heat and Mass Transfer-4th ed, John Wiley & Sons, New York, pp. 3-5.
4 Martinez-Perez, M. L., Mompean, F. J., Ruiz-Hervias, J., Borlado, C. R., Atienza, J. M., Garcia-Hernandez, M., Elices, M., Gil-Sevillano, J., Ru Lin Peng and Buslaps, T., 2004, “Residual Stress Profiling in the Ferrite and Cementite Phases of Cold-Drawn Steel Rods by Synchrotron X-ray and Neutron Diffraction,” Acta Meterialia, Vol. 52, pp. 5303-5313.   DOI   ScienceOn
5 Ruiz, J., Atienza, J. M. and Elice, M., 2003, “Residual Stresses in Wires: Influence of Wire Length,” Journal of Material Engineering and Performance, Vol. 12, No. 4, pp. 480-489.   DOI   ScienceOn
6 Van Acker, K., Root, J., Van Houtte, P. and E. Aernoudt, 1996, “Neutron Diffraction Measurement of the Residual Stress in the Cementite and Ferrite Phase of Cold-Drawn Steel Wires,” Acta Meterialia, Vol.44, pp. 4039-4049.   DOI   ScienceOn
7 Kim, D. W., Lee, S. K., Kim, B. M., Jung, J. Y. and D. Y. Ban, 2010, “Development of Surface Residual Stress Prediction Formula for Multi-Pass High Carbon Steel Wire Drawing,” Transactions of Materials Processing, Vol. 19, No. 4, pp. 224-229.   DOI   ScienceOn
8 Goes, B., Gil-Sevillano, J. and D´Haene U., 1998, “Modeling the Evolution of Residual Stresses during Tensile Testing of Elastoplastic Wires Subjected to A Previous Bending Operation,” International Journal of Mechanical Sciences, Vol. 41, pp.1031-1050.   DOI   ScienceOn
9 Atienza, J. M., Ruiz-Hervias, J., Martinez-Perez, M. L., Mompean, F. J., Garcia-Hernandez, M. and Elices, M., 2005, “Residual Stresses in Cold Drawn Pearlitic Rods,” Scripta Materialia, Vol. 52, pp. 1223-1228.   DOI   ScienceOn
10 Atienza, J. M. and Elices, M., 2003, “Influence of Residual Stress in the Tensile Test of Cold Drawn Wires,” Materials and Structures, Vol. 36, pp. 548-552.   DOI
11 Siebel, E. and Kobitzsch, R., 1943, “Die Erwarmung des Ziehgutes beim Drahtziehen,” Stahl und Eisen, Vol. 63, No. 6, pp. 110-113.
12 Kemp, I. P., 1987, "Heat Generation and Strain Ageing," Wire Industry, Vol. 54, No. 637, pp. 41-49.
13 Kemp, I. P., Pollard, G. and Bramley, A. N., 1985, “Temperature Distributions in The High Speed Drawing of High Strength Steel Wire,” International Journal of Mechanical Science, Vol. 27, No. 11/12, pp. 803-811.   DOI   ScienceOn
14 Kim, Y. S., Kim, D. H., Kim, B. M., Kim, M. A., and Park, Y. M., 2001, “Development of Wire Temperature Prediction Method in a Continuous Dry Wire Drawing Process Using the High Carbon Steel,” Trans. of the KSME (A), Vol. 25, No. 2, pp. 330-337.   과학기술학회마을
15 Norman E. Dowling, 1999, Mechanical Behavior of Materials, Prentice Hall International, Inc., New Jersey, pp. 128-129.
16 Lee, S. K., Kim, D. W., Kim, B. M., Jung, J. Y., Ban, D. Y., and Lee, S. B., 2010, “Evaluation of Axial Residual Stress in Multi-Pass Drawn High Carbon Steel Wire Considering Effective Stress-Strain Curve at High Strain”, Journal of Korean Society for Precision Engineering, Vol. 27, No. 8, pp. 70-75
17 Vijayakar, S., 1997, “Thermal Influence on Residual Stresses in Drawn Wire,” Wire Journal International, Vol. 30, No. 6, pp. 116-119.
18 Kim, N. S. and Kim, H. J., 2002, Plastic Deformation and Analysis, Munundang, Seoul, pp. 89-91.
19 KO, D. C., Hwang, W. H., Lee, S. K. and Kim, B. M., 2006, “A Study on the Method of Residual Stress Relaxation during Wire Drawing and Evaluation of Residual Stress Using Nano Indentation Test,” Journal of Korea Society of Precision Engineering, Vol. 23, No. 5, pp.162-169.   과학기술학회마을