|
| 1 |
Analysis of Durability of Torsion Beam Axle Using Modal Stress Recovery Method
Ko, Jun-Bok;Lim, Young-Hoon;Lee, Dong-Cheol;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1339-1344,
|
|
| 2 |
Estimation of Joint Moment and Muscle Force in Lower Extremity During Sit-to-Stand Movement by Inverse Dynamics Analysis and by Electromyography
Kim, Yoon-Hyuk;Phuong, Bui Thi Thanh;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1345-1350,
|
|
| 3 |
Study on Improving Reliability of Biomonitor by Using CCD Camera
Kim, Hyun-Chang;Kim, Young-Suk;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1351-1357,
|
|
| 4 |
Study on Vehicle Deceleration Control in School Zones by Taking Driver's Comfort into Account
Cho, Hyo-Seung;Kim, Hyoung-Seok;Lee, Byung-Ryong;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1359-1366,
|
|
| 5 |
Optimization of Resistance Spot Weld Condition for Single Lap Joint of Hot Stamped 22MnB5 by Taking Heating Temperature and Heating Time into Consideration
Choi, Hong-Seok;Kim, Byung-Min;Park, Geun-Hwan;Lim, Woo-Seung;Lee, Sun-Bong;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1367-1375,
|
|
| 6 |
Study on Inverse Approach to Validation of Viscoplastic Model of Sn37Pb Solder and Identification of Model Parameters
Gang, Jin-Hyuk;Lee, Bong-Hee;Choi, Joo-Ho;Joo, Jin-Won;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1377-1384,
|
|
| 7 |
Electromagnetic Flapping Shutters for Phone Cameras
Choi, Hyun-Young;Han, Won;Cho, Young-Ho;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1385-1391,
|
|
| 8 |
Correlation of Human Carpal Motion and Electromyogram
Chun, Han-Yong;Kim, Jin-Oh;Park, Kwang-Hun;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1393-1401,
|
|
| 9 |
Low-Cycle Fatigue in Ni-Base Superalloy IN738LC at Elevated Temperature
Hwang, Kwon-Tae;Kim, Jae-Hoon;Yoo, Keun-Bong;Lee, Han-Sang;Yoo, Young-Soo;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1403-1409,
|
|
| 10 |
Evaluation of Variation in Residual Strength of Carbon Fiber Reinforced Plastic Plate with a Hole Subjected to Fatigue Load
Kim, Sang-Young;Kang, Min-Sung;Koo, Jae-Mean;Seok, Chang-Sung;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1411-1417,
|
|
| 11 |
Low-Cycle Fatigue in Quenched Boron Steel Sheet Due to Hot Stamping
Jang, Won-Seok;Suh, Chang-Hee;Oh, Sang-Kyun;Kim, Dong-Bae;Sung, Jee-Hyun;Jung, Yun-Chul;Kim, Young-Suk;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1419-1425,
|
|
| 12 |
Study of a Mixed Finite Element Model for the Analysis of a Geometrically Nonlinear Plate
Kim, Woo-Ram;Choi, Youn-Dae;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1427-1435,
|
|
| 13 |
Optimal Design of Slipper Metal for Power Transmission in Aluminum Hot Rolling Process
Lee, Hyun-Seung;Lee, Young-Shin;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1437-1442,
|
|
| 14 |
Pass Schedule Design to Inhibit Surface Cracks Generation on Workpiece in Groove Rolling Process
Na, Doo-Hyun;Lee, Young-Seog;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1443-1453,
|
|
| 15 |
High-Temperature Structural Analysis Model of the Process Heat Exchanger for Helium Gas Loop (II)
Song, Kee-Nam;Lee, Heong-Yeon;Kim, Chan-Soo;Hong, Seong-Duk;Park, Hong-Yoon;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1455-1462,
|
|
| 16 |
Investigation on the Size Effects of Polycrystalline Metallic Materials in Microscale Deformation Processes
Kim, Hong-Seok;Lee, Yong-Sung;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1463-1470,
|
|
| 17 |
A Study of Friction in Microfoming Using Ring Compression Tests and Finite Element Analysis
Kim, Hong-Seok;Kim, Geung-Rok;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1471-1478,
|
|
| 18 |
Prediction of Axial Residual Stress in Drawn High-Carbon Wire Resulting Due to Increase in Surface Temperature
Kim, Dae-Woon;Lee, Sang-Kon;Kim, Byung-Min;Jung, Jin-Young;Ban, Deok-Young;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1479-1485,
|
|
| 19 |
Design of Conformal Cooling Channels for the Mould of a Plastic Drawer of a Refrigerator by Analysis of Three-Dimensional Injection Moulding
Ahn, Dong-Gyu;Park, Min-Woo;Park, Seung-Hwa;Kim, Hyung-Su;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1487-1492,
|
|
| 20 |
Experimental Study on Meso-Scale Milling Process Using Nanofluid Minimum Quantity Lubrication
Lee, P.H.;Nam, T.S.;Li, Chengjun;Lee, S.W.;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1493-1498,
|
|
| 21 |
Study on Performance Improvement in Magnetic Abrasive Polishing Assisted by Silicone Gel Medium
Kim, Sang-Oh;Kwak, Jae-Seob;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1499-1505,
|
|
| 22 |
Study on the Relationship Between Emission Signals and Weld Defect for In-Process Monitoring in CO2 Laser Welding of Zn-Coated Steel
Kim, Jong-Do;Lee, Chang-Je;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1507-1512,
|
|
| 23 |
Comparative Analysis of Injection Molding Process by On-line Monitoring in Cylinder of Injection Molding Machine and in Cavity of Mold
Park, Hyung-Pi;Cha, Baeg-Soon;Tae, Jun-Sung;Choi, Jae-Hyuk;Rhee, Byung-Ohk;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1513-1519,
|
|
| 24 |
High-Speed Inkjet Monitoring Module for Jetting Failure Inspection
Shin, Dong-Youn;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1521-1527,
|
|
| 25 |
Development of Methods for Detecting Inkjet Malfunction
Kwon, Kye-Si;Go, Jung-Kook;Kim, Jin-Won;Kim, Dong-Soo;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1529-1535,
|
|
| 26 |
Development of Inkjet Printing System for Printed Electronics
Kwon, Kye-Si;Go, Jung-Kook;Kim, Jin-Won;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1537-1541,
|
|
| 27 |
A Study of the FEM Forming Analysis of the Al Power Forging Piston
Kim, Ho-Yoon;Park, Chul-Woo;Kim, Hyun-Il;Park, Kyung-Seo;Kim, Young-Ho;Joe, Ho-Sung;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1543-1548,
|
|
| 28 |
Study on Improvement of Dimensional Accuracy of a Precision Plastic Screw Under Various Injection-Molding Conditions
Baek, Soon-Bo;Park, Keun;Youm, Chung-Ho;Ra, Seung-Woo;
/
The Korean Society of Mechanical Engineers
, v.34, no.10, pp.1549-1554,
|
|