Browse > Article
http://dx.doi.org/10.3795/KSME-A.2002.26.11.2383

A Study on fatigue Properties with Different Edge Margin for Hole Expansion Plate  

Lee, Joon-Hyun (부산대학교 기계공학부)
Lee, Dong-Suk (부산대학교 대학원)
Lee, Hwan-Woo (경남대학교 기계자동화공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.26, no.11, 2002 , pp. 2383-2389 More about this Journal
Abstract
This paper describes an experimental study on fatigue life extension by using cold working process in fastener hole of aircraft structure. Cold working process was applied for A12024-7351 specimens by considering the effect of edge margin on fatigue life. It is generally recognized that cold working process offers a protective zone around fastener hole of aluminum aircraft structure due to the residual compressive stresses which lead to retardation of crack growth. Thus this process provides the beneficial effect of increasing the fatigue life of the component. there by decreasing maintenance costs. It has also been successfully incorporated into damage tolerance and structural integrity programs. Cold working specimens were tested at constant amplitude peak cyclic stresses. Fatigue life of cold working specimen compared with that of specimen fabricated with base material. The increase of fatigue life for cold working specimen is discussed by both considering the effect of residual compressive stresses measured by X-ray diffraction technique and quantitative effect of edge margin.
Keywords
Cold Working; Edge Margin; Residual Stress; Fatigue Properties;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Al-Obaid, Y. F., 1990, 'A Rudimentary Analysis of Improving Fatigue Life of Metals by Shot Peening,' ASME Journal of Applied Mechanics., Vol. 57, pp. 307-312   DOI
2 Toor, P.M., 1978, 'Cracks Emanating from Precracked Cold-Worked Holes,' Engineering Fracture Mechanics, Vol. 8, pp. 391-395   DOI   ScienceOn
3 Chandawanich, Noppom, 1979, 'An Experimental Study of Fatigue Crack Initiation and Growth from Coldworked Holes,' Engineering Fracture Mechanics. Vol. 11, pp. 609-620   DOI   ScienceOn
4 Poolsuk, S. and Sharpe Jr., W. W., 1978, 'Measurement of Elastic-Plastic Boundary around Cold Worked Fastener Hole,' ASME Journal of Applied Mechanics, Vol. 45, pp. 515 - 520   DOI   ScienceOn
5 Ozdernir, A. T. and Edwards, L., 1997, 'Relaxation of Residual Sresses at Cold-worked Fastener Holes due to Fatigue Loading,' Fatigue and Fracture Engineering Materials and Structure, Vol. 20, pp. 1443-1451   DOI   ScienceOn
6 Almen, T. O. and Black, P. M., 1981, 'Residual Stress and Fatigue in Metals,' McGraw-Hill, New York
7 Chung, S. C. and Back, S. D., 1998, 'Effect of Shot Peening on Fatigue Properties in Spring Steel,' Transactions of the KSME, A, Vol. 22, No, 6, pp. 1009-1015
8 Maddox, S. J,. 1982, 'Influence of Tensile Residual Stresses on the Fatigue Behavior of Welded Joints in Steel,' ASTM STP 776, pp. 63-69
9 Chen, B. D., Griffiths, J. R. and Lam, Y. C., 1993. 'The Effects of Simultaneous Overload and Spot Heating on Crack Growth Retardation in Fatigue,' ASTM STP 637, pp. 153 - 177
10 Rich, D. L. and Impellizzeri, L. F., 1977, 'Fatigue Analysis of Cold-Worked and Interference Fit Fastener Holes,' ASTM STP 637, pp. 153-177
11 Yoo, J. S., Choi, S. Y., Song, J. H., Song, C. H. and Lim, W. K., 1997, 'Fatigue Crack Retardation by Concurrent Cold-Expansion and Ring-Indentation,' Transactions of the KSME, A, Vol. 21, No.2, pp. 305-315   과학기술학회마을
12 Pavier, M. J., Poussard, C. G. C. and Smith, D. J., 1997, 'A Fnite Element Simulation of the Cold Working Process for Fastener Holes,' Journal of Strain Analysis, Vol. 32, No.4, pp. 287-300   DOI   ScienceOn
13 Saunder, T. J. and Grandt, A. F., 1999, 'The Effect of Edge Distance on Coldworking Fastener Holes,' UASF ASIP Conference, pp. 153-177
14 Kim, C., Yang, W. H., Heo, S. P. and Chung, K. H., 2002, 'Analysis of Residual Stresses Induced by Cold Expansion Using Finite Element Method,' KSAS International Journal, Vol. 30, No. 2, pp. 46-51