|
1 |
Deterministic Fracture Mechanics Analysis of Nuclear Reactor Pressure Vessel Under Rot Leg Leak Accident
Lee, Sang-Min;Choi, Jae-Boong;Kim, Young-Jin;Park, Youn-Won;Jhung, Myung-Jo;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2219-2227,
|
|
2 |
Design and Performance Test of the Shoe Holder Spring of the Axial Piston Pump
Chun, Young-Jun;Choi, Jin-Ho;Chung, Hee-Taeg;Lee, Sang-Chan;Kim, Tae-Il;Kim, Dong-Woo;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2228-2236,
|
|
3 |
Study on Kinematic Calibration of a Parallel-typed Machining Center Tool
Lee, Min-Ki;Kim, Tae-Sung;Park, Kun-Woo;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2237-2244,
|
|
4 |
Optimum Design of the Process Parameter in Sheet Metal Forming with Design Sensitivity Analysis using the Direct Differentiation Approach (I) -Design Sensitivity Analysis-
Kim, Se-Ho;Huh, Hoon;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2245-2252,
|
|
5 |
Analysis of Tube Expansion by Hydroforming
Lee, Jae-Won;Park, Jong-Jin;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2253-2261,
|
|
6 |
Optimum Design of the Process Parameter in Sheet Metal Forming with Design Sensitivity Analysis using the Direct Differentiation Approach (II) -Optimum Process Design-
Kim, Se-Ho;Huh, Hoon;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2262-2269,
|
|
7 |
Dynamic Analysis of a Cantilever Beam with the Payametric Excitation in Rotation
Im, Hyung-Bin;Chung, Jin-Tai;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2270-2276,
|
|
8 |
Evaluation Method of Interface Strength in Bonded Dissimilar Materials of AU/Epxy
Chung, Nam-Yong;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2277-2286,
|
|
9 |
The Mixed Mode fatigue Crack Propagation Behavior with the Variation of Stress Ratio
Song, Sam-Hong;Choi, Ji-Hoon;Lee, Jeong-Moo;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2287-2296,
|
|
10 |
Thermal Deformation Analysis of Shadow Mask in a Flat TV and Prediction of Electron Beam Landing Shift by FEM
Kim, Jeong;Park, Soo-Kil;Kang, Beom-Soo;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2297-2304,
|
|
11 |
Failure Probability Estimation of Flaw in CANDU Pressure Tube Considering the Dimensional Change
Kwak, Sang-Log;Lee, Joon-Seong;Kim, Young-Jin;Park, Youn-Won;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2305-2311,
|
|
12 |
The Least-Squares Meshfree Method for Linear Elasticity
Kwon, Kie-Chan;Park, Sang-Hoon;Youn, Sung-Kie;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2312-2321,
|
|
13 |
Evaluation of Corrosion Degradation Characteristics of Turbine Blade Material Using Backward Radiated Ultrasound
Song, Sung-Jin;Kim, Young-H.;Bae, Dong-Ho;Jung, Min-Ho;Kwon, Sung-Duk;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2322-2327,
|
|
14 |
Nondestructive Evaluation on Strength Characteristic and Damage Behavior of Al 7075/CFRP Sandwich Composite
Lee, Jin-Kyung;Yoon, Han-Ki;Lee, Joon-Hyun;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2328-2335,
|
|
15 |
Effect of Composition on Cutting Characteristics and Reliability Analysis of Ti(C,N) Cermet Tool
Park, June-Seuk;Kim, Seong-Won;Kwon, Won-Tae;Kang, Shin-Hoo;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2336-2341,
|
|
16 |
Numerical Analysis of ]Residual Stresses and Birefringence in Injection/Compression Molded Center-gated Disks (I) - Modeling and Basic Results -
Lee, Young-Bok;Kwon, Tai-Hun;Yoon, Kyung-Hwan;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2342-2354,
|
|
17 |
Numerical Analysis of Residual Stresses and Birefringence in Injection/Compression Molded Center-gated Disks (II) - Effects of Processing Conditions -
Lee, Young-Bok;Kwon, Tai-Hun;Yoon, Kyung-Hwan;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2355-2363,
|
|
18 |
Numerical Analysis of Dynamic Stress Concentrations in Axisymmetric Problems
Sim, Woo-Jin;Lee, Sung-Hee;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2364-2373,
|
|
19 |
The Effect of Resin Mixture Ratio on Characteristics of Tensile and T-peel Strength in Al/AFRP Laminates
Song, Sam-Hong;Kim, Cheol-Woong;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2374-2382,
|
|
20 |
A Study on fatigue Properties with Different Edge Margin for Hole Expansion Plate
Lee, Joon-Hyun;Lee, Dong-Suk;Lee, Hwan-Woo;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2383-2389,
|
|
21 |
Stress Intensity factor Calculation for the Axial Semi-Elliptical Surface Flaws on the Thin-Wall Cylinder Using Influence Coefficients
Jang, Chang-Heui;Moon, Ho-Rim;Jeong, Ill-Seok;Kim, Tae-Ryong;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2390-2398,
|
|
22 |
Development and Evaluation of Predictive Model for Microstructures and Mechanical Material Properties in Heat Affected Zone of Pressure Vessel Steel Weld
Kim, Jong-Sung;Lee, Seung-Gun;Jin, Tae-Eun;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2399-2408,
|
|
23 |
Minimization of Post-processing area for Stereolithography Parts by Selection of Part Orientation
Kim, Ho-Chan;Lee, Seok-Hee;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2409-2414,
|
|
24 |
Minimization of Initial Deflection of Multi-Layered Micro-Actuator with Step-Up Structure
Lee, Hee-Joong;Kang, Shin-Ill;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2415-2420,
|
|
25 |
A Stochastic Analysis in Steam Turbine Blade Steel Using Monte Carlo Simulation
Kim, Chul-Su;Jung, Hwa-Young;Kang, Myung-Su;Kim, Jung-Kyu;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2421-2428,
|
|
26 |
The Problem of Engine Friction Test by Strip Down Method
Cho, Myung-Rae;Oh, Dae-Yoon;Han, Dong-Chul;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2429-2435,
|
|
27 |
finite Element Modeling of a Hemispherical Asperity Adhesively Contacting the Plane Surface of Semi-Infinite Rigid Body
Cho, Sung-San;Park, Seung-Ho;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2436-2441,
|
|
28 |
Engineering J-Integral Estimation for Internal Axial Surface Cracks in Cylinders (II) -Optimised Reference Stress Based Estimation-
Kim, Jin-Su;Kim, Yun-Jae;Kim, Young-Jin;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2442-2449,
|
|
29 |
Microlens Fabrication Method by the Modified LICA Process
Lee, Sung-Keun;Lee, Kwang-Cheol;Lee, Seung-S.;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2450-2456,
|
|
30 |
Application of a Boundary element Method to the Analysis of ultrasonic Scattering by Flaws
Jeong, Hyun-Jo;Kim, Jin-Ho;Park, Moon-Cheol;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2457-2465,
|
|
31 |
Optimal Design of Strip Casting Roll
Park, Cheol-Min;Kang, Tae-Wook;Park, Gyung-Jin;
/
The Korean Society of Mechanical Engineers
, v.26, no.11, pp.2466-2473,
|
|