|
| 1 |
INFLUENTIAL FACTORS FOR HLA PUMP UP IN A ROLLER FINGER FOLLOWER ENGINE
Choi, M.;Min, K.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.469-474,
|
|
| 2 |
EFFECT OF ENGINE EXHAUST GAS MODULATION ON THE COLD START EMISSIONS
Shamim, T.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.475-487,
|
|
| 3 |
BREAKUP MODELING OF A LIQUID JET IN CROSS FLOW
Im, K.S.;Lin, K.C.;Lai, M.C.;Chon, M.S.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.489-496,
|
|
| 4 |
TORQUE CHARACTERISTICS ANALYSIS FOR OPTIMAL DESIGN OF A COPPER-LAYERED EDDY CURRENT BRAKE SYSTEM
Anwar, S.;Stevenson, R.C.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.497-502,
|
|
| 5 |
PERFORMANCE MEASUREMENTS OF A TRACKED VEHICLE SYSTEM
Rahman, A.;Mohiuddin, A.K.M.;Hossain, A.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.503-512,
|
|
| 6 |
PROPER PD STEERING ASSISTANCE CONSTANT BASED ON THE DRIVING SITUATION
Nozaki, H.;Makita, M.;Masukawa, T.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.513-519,
|
|
| 7 |
DAMPER MODELING FOR DYNAMIC SIMULATION OF A LARGE BUS WITH MR DAMPER
Kim, Y.;Choi, S.;Lee, J.;Yoo, W.;Sohn, J.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.521-527,
|
|
| 8 |
FINITE ELEMENT MODELING OF STATIC TIRE ENVELOPING CHARACTERISTICS
Alkan, V.;Karamihas, S.M.;Anlas, G.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.529-535,
|
|
| 9 |
MULTI-STATE CONTROL STRATEGY OF STARTING FOR A WET FRICTION CLUTCH VIA A FUZZY LOGIC ALGORITHM
He, L.;Li, L.;Yu, L.Y.;Song, J.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.537-544,
|
|
| 10 |
SIDESLIP ANGLE ESTIMATION CONSIDERING SHORT-DURATION LONGITUDINAL VELOCITY VARIATION
Kim, H.H.;Ryu, J.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.545-553,
|
|
| 11 |
AUTOMOTIVE TRANSMISSION EFFICIENCY MEASUREMENT USING A CHASSIS DYNAMOMETER
Irimescu, A.;Mihon, L.;Padure, G.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.555-559,
|
|
| 12 |
DERIVATION AND VALIDATION OF NONLINEAR GOVERNING EQUATIONS FOR AN ANALYSIS OF VEHICLE HANDLING
Yang, S.M.;Kim, J.H.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.561-570,
|
|
| 13 |
SLIDING-MODE-BASED PARAMETER IDENTIFICATION WITH APPLICATION TO TIRE PRESSURE AND TIRE-ROAD FRICTION
Lee, D.J.;Park, Y.S.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.571-577,
|
|
| 14 |
BENEFITS AND CHALLENGES OF CONTROLLING A LED AFS (ADAPTIVE FRONT-LIGHTING SYSTEM) USING FUZZY LOGIC
Lukacs, L.;Dassanayake, M.;Magalhaes, R.;Fontes, C.;Embirucu, M.;Pepe, I.M.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.579-588,
|
|
| 15 |
DESIGN FRAMEWORK FOR FLEXRAY NETWORK PARAMETER OPTIMIZATION
Jang, K.;Park, I.;Han, J.;Lee, K.;SunWoo, M.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.589-597,
|
|
| 16 |
MULTI-RESPONSE OPTIMIZATION OF DIESEL ENGINE PERFORMANCE PARAMETERS USING THUMBA BIODIESEL-DIESEL BLENDS BY APPLYING THE TAGUCHI METHOD AND GREY RELATIONAL ANALYSIS
Karnwal, A.;Hasan, M.M.;Kumar, N.;Siddiquee, A.N.;Khan, Z.A.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.599-610,
|
|
| 17 |
DESIGN AND USE OF AN EDDY CURRENT RETARDER IN AN AUTOMOBILE
Liu, C.Y.;Jiang, K.J.;Zhang, Y.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.611-616,
|
|
| 18 |
OPTIMAL DESIGN OF THE EXHAUST SYSTEM LAYOUT TO SUPPRESS THE DISCHARGE NOISE FROM AN IDLING ENGINE
Ih, J.G.;Choi, C.Y.;Kim, T.K.;Jang, S.H.;Kim, H.J.;
/
The Korean Society of Automotive Engineers
, v.12, no.4, pp.617-630,
|
|