Objectives: The purpose of this study was to examine the influencing factors on presenteeism of nurses in Korea and Japan. Methods: The subjects were hospital nurses in Korea and Japan. Data of 1,618 nurses were collected from September 2007 to March 2008 by structured questionnaires. The response rate of subjects was 93.0% in Korea and 76.9% in Japan. The data was analyzed using SPSS 12.0 package. Results: The three major health problems of Korean nurses were 'shoulder, back and neck pain', 'fatigue or edema of foot' and 'gastrointestinal trouble'. The three major health problems of Japanese nurses were 'shoulder, back and neck pain', 'fatigue or edema of foot' and 'depression or anxiety'. 'Depression or anxiety' were considered the highest cause of presenteeism by nurses in both countries. The number of health problems was the most influencing factor on presenteeism by nurses in both Korea and Japan. Conclusions: These results imply that clinical nurses have a higher level of presenteeism. Therefore, administrators need to use job-related safety and health strategies to manage the presenteeism of nurses. It is desirable that those strategies will be specifically applied to gastrointestinal trouble management for Korean nurses and to depression management for Japanese nurses.

This study was conducted to measure concentrations of particulate matter ($PM_{10}$, $PM_{2.5}$) and endotoxin in thirty public facilities (7 elderly-care facilities, 4 hypermarkets, 4 university hospitals, 7 child-care facilities, 4 subway stations and 4 bus terminals) from September 2004 to February 2007 in Seoul and Gyeonggi-do province. $PM_{10}$ or $PM_{2.5}$ was measured with glass fiber filter and mini volume air sampler for 6 to 8 hours in indoor and outdoor of the facilities and expressed as ${\mu}g/m^3$. After weighing the filter, endotoxin was analyzed by Limulus Ameobocyte Lysate method ($EU/m^3$). $PM_{10}$ in indoor air was higher (GM and GSD was 78.00 and $1.92\;{\mu}g/m^3$, respectively) than the outdoor air (GM and GSD was 60.70 and $2.23\;{\mu}g/m^3$, respectively, I/O=1.28). All measurements was not exceeded the national maintenance standard. Elderly-care and child-care facilities showed relatively higher concentrations ($83.27\;{\mu}g/m^3$ and $81.75\;{\mu}g/m^3$; I/O=2.01 and 1.19, respectively) than hypermarkets or university hospitals. The highest PM2.5 was seen in child-care facilities ($62.15\;{\mu}g/m^3$, I/O=2.42). The I/O of the endotoxin in the PM10 and the $PM_{2.5}$ was exceeded 1.0 (1.37 and 1.57, respectively). Indoor $PM_{10}$ was affected by user/day and humidity, and endotoxin in the PM10 was affected by temperature. In conclusion, elderly- and child-care facilities are high priority facilities to be improved indoor air quality.

This study is to characterize the occurrence types and mineralogical characteristics of asbestos for the Kwangcheon areas, Chungnam. The mine areas had been exploited as asbestos mines for several decades since 1930. Host rocks of the asbestos are serpentinites and altered rocks of the ultramafic rocks. Representative samples of the host rocks and minerals were sampled and were examined with microscopes. To confirm for the existences and compositions for the asbestos, the rock samples were analysed with EPMA, XRD and EDS. Chrysotile, tremolite and actinolite were found as asbestos and non-asbestos forms in these areas. Chrysotiles, as non-asbestos forms, occur in the host rocks with mesh and hourglass textures. They, as asbestos forms, are mainly found as the veins. The tremolite and actinolite, as asbestos types, occur as alteration products of the olivine and pyroxene within the host rocks. They, as asbestos types, are also found following the cracks and fractures. Overall results suggest that three types of the asbestos are found in the Kwangcheon and Kaewol mine areas. Based on the occurrence types for the asbestos, additional studies are required for the asbestos in the top soil and air.

This study was conducted to evaluate work environment monitoring program(WMP) under Industrial Safety and Health Act in Korea. WMP was evaluated by focusing on five key elements, such as purpose, subject, scope, method and workers' participation. The operation status of WMP was evaluated by using questionnaire to workers and data published by Ministry of Labor(MOL). Compliance rate of WMP was less 13 % in manufacturing workplaces. Over-exposure rate was steady state by annual trend. The degree of workers' satisfaction to WMP was just 24 %. A critical problem with the current WMP is that the employer and workers are not acting as main players. For a fundamental improvement in working condition to take place, participation of workers should be expanded and be guaranteed by law.

Lead chromate is made by sodium dichromate and lead acetate, and has being used widely in the part of pigment, paints, inks, plastics and so on. Even though lead chromate has health hazards which like both lead and chromium, there are a few study about pigment workplaces using lead chromate in Korea. The purpose of this study is to evaluate workers' exposure levels and airborne lead and chromium concentration in the pigment workplaces using lead chromate. There are 20 workers in the total 5 workplaces. 10 workers(50%) have been exposed to lead and 3 workers(15%) have been exposed to chromium, which exceeded the American Conference of Governmental Industrial Hygienists(ACGIH) Threshold Limit Value (Pb: $0.05\;mg/m^3$, Cr: $0.012\;mg/m^3$) and Korean Ministry of Labor's Standard. Geometric mean (GM) of airborne lead was highest in pigment ($0.0421\;mg/m^3$), paint ($0.0020\;mg/m^3$) and PVC coloring ($0.0007\;mg/m^3$), respectively(p<0.05). The result of airborne chromium concentration was paint ($0.0033\;mg/m^3$), paint ($0.0004\;mg/m^3$) and PVC coloring ($0.0003\;mg/m^3$). Also the lead and chromium concentration in the manual process is each 30 times and 10 times higher than the value in automatic process(p<0.01). In the classified process by detail, the concentration of airborne lead was $0.0638\;mg/m^3$ in grinding & packaging, mixture & after-measuring ($0.0436\;mg/m^3$), filtration & drying ($0.0402\;mg/m^3$), lead nitrate & dissolution($0.0129\;mg/m^3$), pigment commitment & mixture ($0.0013\;mg/m^3$) and dispersion & grinding ($0.0010\;mg/m^3$) (p<0.05). Moreover the concentration of a sample in weighting & packaging was $0.0023\;mg/m^3$. The concentration of lead in workers' blood was pigment (15.12 ug/dl), paint (4.74 ug/dl) and PVC coloring (2.50 ug/dl), and some samples have exceeded biological exposure limit. In conclusion, the depending on their work industry and process, workers have been exposed to the high lead chromate.

The reduction of risk within the workplace has long been focus of attention both through industry initiatives and legislation. Exposure matrices according to industries and processes treated DMF (N,N-Dimethylformamide) were constructed based on KOSHA (Korean Occupational Safety and Health Agency)'s 2005 exposure database which were gathered from Korean agencies of workplace hazards evaluation for business place. These exposure matrices were assessed by danger value (DV) that was calculated from combination of hazard rating, duration of use rating, and risk probability rating of exposure to chemical hazardous agents in accordance with Hallmark Risk Assessment Tool. The results of risk assessment is divided four kinds of control bands which were related with control measures. The applicability of risk assessment using exposure matrices was performed by field study and survey for high matrices group. This study found that more attentions should be paid to two industries, manufacture of sewn wearing apparel and manufacture of textiles, among 19 industries, and to 3 processes, coating, processing & mixing, and lab, among 80 processes because those were regarded as having the highest risk.

The objective of the survey is to define and judge exposure profiles semi-qualitative data in high risk processes using styrene. The survey was conducted on 98 factories out of 229 factories based on data from periodic working environment monitoring for styrene. Styrene is widely utilized as a raw material for PS and co-polymers such as ABS, SAN, SBR, SBL, unsaturated polyester resins(UPR) and others. An approximate breakdown of styrene's markets in Korea is PS 30%, expandable PS 17%, ABS 33%, SAN 5%, SBL 4%, SBR 3%, UPR 1% and other 7%. Although UPR accounts for 1% of total amount of styrene, workers dealing with it are exposed to very high concentrations up to 64 ppm. Especially styrene is widely used in the laminating process of fiberglass reinforced plastics(FRP) manufacturing industry. The Applications using styrene are largely classified into two sections which are applied to styrene monomer(SM) and UPR. SM is utilized for a raw material of resins, surfactant and adhesive. UPR is employed for FRP and non-FRP. For SM control targets are mixing colors and packing in the gelcoat resins manufacturing industry(MI), for UPR control targets out of works using UPR are 1) laminating in the MI of plastics, automobile parts and boats, 2) mixing and packing in the SMC/BMC MI, 3) molding and cutting in the other specific plastics MI, 4) mixing and coating in artificial marble product MI, 5) dipping in the electric motors & transformers MI, 6) molding in the button MI, 7) painting in the musical instrument MI. Findings from the study have given the information for the high risk processes and working practices so that occupational health professionals could focus on targeted workplaces to prevent occupational diseases. It is also useful to develop a control strategies and specific controls for high risk processes and facilities using styrene.