BIM is one of the means of reducing the economic loss caused by design errors. These features of BIM have led to increased use of BIM. With the increasing use of BIM, several studies have been conducted to analyze the performance of BIM. As the importance of BIM staff is emphasized in the performance analysis of BIM, the human resource allocation of BIM staff can become an important research issue. However, there are few studies to measure the workforce effectiveness of BIM staff. Ham et al (2020) measured BIM workforce efficiency using FCFS queue model rules. Since design errors can have different effects on the project depending on the type, there are design errors that must be dealt with first. Therefore, in this study, a priority queue was used to solve design errors with high priority first. The performance of BIM-based design verification was analyzed by quantitatively analyzing the performance of BIM staff when the priority rule was applied to the design error processing sequence.

Existing real estate markets are monopolized because they are capital intensive and have information asymmetry. However, with the advent of the Fourth Industrial Revolution, technology is converging in various industries based on information technology (IT), and the real estate market is also developing a new field called "PropTech". According to this trend, new PropTech technologies are emerging in various real estate services sectors in Korea, but the electronic contract system, which accounts for the largest portion of the real estate industry, is still cited as a complex identification process and long processing time. Therefore, in this paper, we propose an improvement plan for the current electronic contract system through the introduction of blockchain technology, which is drawing attention with the development of PropTech, and explore the possibility of introduction by producing an experimental model of blockchain-applied electronic contract system in a programming language.

In order to maximize the use of BIM, all data related to individual elements in the model must be correctly assigned, and it is essential to check whether it corresponds to the IFC entity classification. However, as the BIM modeling process is performed by a large number of participants, it is difficult to achieve complete integrity. To solve this problem, studies on semantic integrity verification are being conducted to examine whether elements are correctly classified or IFC mapped in the BIM model by applying an artificial intelligence algorithm to the 2D image of each element. Existing studies had a limitation in that they could not correctly classify some elements even though the geometrical differences in the images were clear. This was found to be due to the fact that the geometrical characteristics were not properly reflected in the learning process because the range of the region to be learned in the image was not clearly defined. In this study, the CRF-RNN-based semantic segmentation was applied to increase the clarity of element region within each image, and then applied to the MVCNN algorithm to improve the classification performance. As a result of applying semantic segmentation in the MVCNN learning process to 889 data composed of a total of 8 BIM element types, the classification accuracy was found to be 0.92, which is improved by 0.06 compared to the conventional MVCNN.

This study quantitatively analyzes the work performance of the structural safety diagnosis team that diagnoses pipe racks. To this end, a method for evaluating the performance of the structural safety diagnosis team using the queuing model was proposed. For verification, the case of applying the existing method and the method of introducing a 3D laser scanner for one site was used. The period, number of people, and initial investment cost of each project were collected through interviews with case project experts. As a result of analyzing the performance of the structural safety diagnosis team using the queuing model, it was possible to confirm the probability of delay in the work of each project and the amount of delayed work. Through this, the cost (standby cost) when the project was delayed was analyzed. Finally, economic analysis was conducted in consideration of the waiting cost, labor cost, and initial investment cost. The results of this study can be used to decide whether to introduce 3D laser scanners.

The augmented reality (AR) has recently became an attractive technology in construction industry, which can play a critical role in realizing smart construction concepts. The AR has a great potential to help construction workers access digitalized information about design and construction more flexibly and efficiently. Though several AR applications have been introduced for on-site made to enhance on-site and off-site tasks, few are utilized in actual construction fields. This paper proposes a new AR framework that provides on-site managers with an opportunity to easily access the information about construction resources such as workers and equipment. The framework records videos with the camera installed on a wearable AR device and streams the video in a server equipped with high-performance processors, which runs an object detection algorithm on the streamed video in real time. The detection results are sent back to the AR device so that menu buttons are visualized on the detected objects in the user's view. A user is allowed to access the information about a worker or equipment appeared in one's view, by touching the menu button visualized on the resource. This paper details implementing parts of the framework, which requires the data transmission between the AR device and the server. It also discusses thoroughly about accompanied issues and the feasibility of the proposed framework.

Recently, Building Information Modeling(BIM) has become a hot topic in the construction industry such as quantity calculation, interference check, process management, and construction cost management. It is also trying to convert the existing 2D design to 3D design and introduce the BIM in various fields, thus, many new deliverable are being presented but there are many issues due to the lack of standard guides on the preparation and delivery criteria for such new deliverable and how to utilize performance data. Therefore, In order to develop the electronic delivery process, we analyzed the process related to the delivery of BIM digital models presented in domestic and international BIM guidelines and the delivery of products from the Korea National Railway. The analysis focused on the list of achievements, delivery process, quality review standards, and the utilization code system of the Korea National Railway through BIM guidelines and the National Railroad Service's business procedures. Based on these analysis results, it presents a plan to construct an functional module of electronic delivery.

An IFC file is dependent on the IFC schema. Because of this relationship, most IFC-using software reads and interprets the IFC File by employing an early binding method, which uses a standard IFC schema. In the case of most open sources, early binding methods using standard IFC schema have a problem that they cannot express extra information of IFC File out of extended IFC schema. Also, in the case of previous studies, they suggested schema extension, such as adding attribute information to the schema, rather than the interpretation of IFC File. This study research on method of extracting shape and attribute information was conducted by analyzing the IFC File produced through the Port schema, which is an extended IFC schema. Three objects were created using the reference relationship between the Port schema definition and the IFC entity, and, at the end, the three objects were combined into one object. It has been confirmed that the shape and property data were express properly while delivering the combined object to the viewer. The process is possible because of the method of matching IFC schema and IFC File, which is dependent on IFC schema but not early binding method. However, this method has some drawbacks, such that contemporaneously generated many objects consume many memory spaces. Future research to investigate that issue further is needed.

A smart home system improves the elderly's quality of life by monitoring and analyzing their movements and health conditions with better health-care and social support services. Therefore, there has been an effort to adopt a smart home system for the independently living elderly. However, to the best of our knowledge, no study has investigated the usability of a smart home system on actual independently living elderly housing in long-term settings. Thus, this study aims to demonstrate the usability of a smart home system on independently living elders in living lab conditions. The BLE smart band and the BLE receiver were chosen for the smart home system to monitor the movement of the participants in their homes as well as to monitor the heart rates, step counts, sleep index. Nine independent living elderly from the senior welfare center in Kimjae participated in this living lab demonstration experiment for ten months. This demonstration experiment confirmed the effectiveness of low-cost and easily adoptable IoT-based BLE sensor sets on independent living elders and discussed the troubles and limitations of the experiment. By grasping the pros and cons of IoT-based BLE sensor sets, this study seeks to improve the accessibility and usability of smart home systems for the elderly population in independent living arrangements.