Journal of Power Electronics

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

RASP methods for achieving low torque pulsation in spoke-type PM motors

  • Gaohong Xu (School of Electrical Information Engineering, Jiangsu University) ;
  • Jian Chen (School of Electrical Information Engineering, Jiangsu University) ;
  • Tang Tang (School of Electrical Information Engineering, Jiangsu University) ;
  • Maoen Tang (School of Electrical Information Engineering, Jiangsu University) ;
  • Qian Chen (School of Electrical Information Engineering, Jiangsu University)
  • Received : 2023.06.10
  • Accepted : 2024.02.02
  • Published : 2024.06.20
⟨ Previous Next ⟩

Abstract

This paper proposes a new structure using reshaped assisted salient pole (RASP) methods to reduce the torque ripple of spoke-type permanent magnet (PM) motors. During the structure improvement process, the size of the PMs remains unchanged, and the suitable object is the rotor core. First, the suppression of flux density harmonics by the ASP is demonstrated. For lower torque pulsation, the inverse cosine reshaped (ICR) ASP method is proposed. For higher average torque, the third harmonic is injected into the ICR ASP to generate the ICR+3 ASP. Depending on the RASP method, it is possible to optimize the flux density harmonics, especially the harmonics that cause first-order torque pulsation. When compared with existing forminroposed method can achieve lower torqu and higher average torque. Finally, a prototype is manufactured and experimentally tested to demonstrate that the proposed RASP methods can provide low torque pulsation.

Keywords

Acknowledgement

National Natural Science Foundation of China, 51907080, Gaohong Xu, 52077097, Qian Chen, Postdoctoral Research Foundation of China, 2019M661746, Gaohong Xu.

References

  1. Xu, G., Zhao, W., Liu, G., Zhai, F., Chen, Q.: Torque performance improvement of consequent-pole PM motors with hybrid rotor configuration. IEEE Trans. Transp. Electrif. 7(3), 1561-1572 (2021) 
  2. Nobahari, A., Vahedi, A., Nasiri-Zarandi, R.: A modified permanent magnet-assisted synchronous reluctance motor design for torque characteristics improvement. IEEE Trans. Energy Convers. 37(2), 989-998 (2022) 
  3. Li, Y., Zhou, Q., Ding, S., Li, W., Hang, J.: Investigation of air-gap field modulation effect in spoke-type PM machines. IEEE Trans. Transp. Electrif. 9(1), 845-855 (2023) 
  4. Carraro, E., Bianchi, N., Zhang, S., Koch, M.: Design and performance comparison of fractional slot concentrated winding spoke type synchronous motors with different slot-pole combinations. IEEE Trans. Ind. Appl. 54(3), 2276-2284 (2018) 
  5. Han, J., Zhang, Z.: Design and optimization of a low-cost hybrid-pole rotor for spoke-type permanent magnet machine. IEEE Trans. Magn. 58(2), 1-6 (2022) 
  6. Xiao, Y., Zhu, Z.Q., Jewell, G.W., Chen, J., Wu, D., Gong, L.: A novel spoke-type asymmetric rotor interior permanent magnet machine. IEEE Trans. Ind. Appl. 57(5), 4840-4851 (2021) 
  7. Takbash, A., Ibrahim, M., Pillay, P.: Design optimization of a spoke-type variable fux motor using AlNiCo for electrified transportation. IEEE Trans. Transp. Electrif. 4(1), 536-547 (2018) 
  8. Liang, P., Chai, F., Yu, Y., Chen, L.: Analytical model of a spoke-type permanent magnet synchronous in-wheel motor with trapezoid magnet accounting for tooth saturation. IEEE Trans. Industr. Electron. 66(2), 1162-1171 (2019) 
  9. Zhang, H., Hua, W., Gerada, D., Gerada, C., Li, Y., Zhang, G.: Comparative study on two modular spoke-type PM machines for in-wheel traction applications. IEEE Trans. Energy Convers. 34(4), 2137-2147 (2019) 
  10. H. Jang, S. T. Oh, Y. Park, H. Kim, I. S. Jang and J. Lee, "Design and analysis of a novel rotor shape to improve power performance," IEEE Trans. Appl. Supercond, vol. 30, no. 4, Jun. 2020, Art. no. 5201304. 
  11. Basnet, B., Pillay, P.: Torque pulsation reduction during magnetization in variable fux machines. IEEE J. Emerg. Sel. Top. Power Electron. 10(2), 1703-1711 (2022) 
  12. D. -H. Kim, S. -Y. Kim, S. -W. Song, J. Lee and W. -H. Kim: Spoke type permanent magnet synchronous generator design considering magnetizing and cogging torque. IEEE Energy Convers. Congr. Expo. 1-6(2022) 
  13. Du, Z.S., Lipo, T.A.: Efficient utilization of rare earth permanent-magnet materials and torque ripple reduction in interior permanent-magnet machines. IEEE Trans. Ind. Appl. 53(4), 3485-3495 (2017) 
  14. G. Xu, T. Tang, Q. Chen, Ze Jia: A new spoke PM motor with ECC ASPs to reduce flux density harmonics. Energies 15(17), 1-9(2022) 
  15. Y. -P. Yang and Guan-Yu Lai: A surface-mounted permanent-magnet motor with sinusoidal pulse width-modulation-shaped magnets. IEEE Trans. Magn. 55(1), 1-8 (2019) 
  16. Wang, K., Gu, Z.Y., Zhu, Z.Q., Wu, Z.Z.: Optimum injected harmonics into magnet shape in multiphase surface-mounted PM machine for maximum output torque. IEEE Trans. Industr. Electron. 64(6), 4434-4443 (2017) 
  17. Liang, P., Chai, F., Li, Y., Pei, Y.: Analytical prediction of magnetic field distribution in spoke-type permanent-magnet synchronous machines accounting for bridge saturation and magnet shape. IEEE Trans. Industr. Electron. 64(5), 3479-3488 (2017) 
  18. Zhou, Y., Li, H., Ren, N., Xue, Z., Wei, Y.: Analytical calculation and optimization of magnetic field in spoke-type permanent-magnet machines sccounting for eccentric pole-arc shape. IEEE Trans. Magn. 53(9), 1-7 (2017) 
  19. Li, J., Wang, K.: A novel spoke-type PM machine employing asymmetric modular consequent-pole rotor. IEEE/ASME Trans. Mechatron. 24(5), 2182-2192 (2019) 
  20. Chen, Q., Xu, G., Zhai, F., Liu, G.: A novel spoke-type PM motor with auxiliary salient poles for low torque pulsation. IEEE Trans. Industr. Electron. 67(6), 4762-4773 (2020) 
  21. Zeng, Y., Cheng, M., Liu, G., Zhao, W.: Effects of magnet shape on torque capability of surface-mounted permanent magnet machine for servo applications. IEEE Trans. Industr. Electron. 67(4), 2977-2990 (2020) 
  22. Chen, Q., Xu, G., Liu, G., Zhao, W., Liu, L., Lin, Z.: Torque pulsation reduction in five-phase IPM motors by lowering interactional MMF. IEEE Trans. Industr. Electron. 65(11), 8520-8531 (2018)