참고문헌
- MEL. Occupational safety and health act. Ministry of Employment and Labor; 2021 [Enforcement Date 18. Aug, 2022.] [Act No.18426, 17. Aug, 2021., Partial Amendment].
- WSH Resources Singapore: Ministry of Manpower; [cited 2023 Aug 8]. Available from: https://www.mom.gov.sg/workplace-safety-and-health/wshresources.
- Institution BS. BS ISO 45001: 2018: occupational health and safety management systems-requirements with guidance for use. BSI Standards Limited; 2018.
- EC. Guidance on risk assessment at work Luxembourg: European Commission; 1996 [cited 2023 Aug 31]. Available from: http://osha.europa.eu/en/topics/riskassessment/guidance.pdf.
- Daniels RD, Gilbert SJ, Kuppusamy SP, Kuempel ED, Park RM, Pandalai SP, Smith MW, Wheeler MW, Whittaker C, Schulte PA. Current Intelligence Bulletin 69: NIOSH practices in occupational risk assessment; 2020 [cited 2023 Aug 31]. Available from: https://www.cdc.gov/niosh/docs/2020-106/pdfs/2020-106revised032020.pdf?id=10.26616/NIOSHPUB2020106.
- SEMI. Safety guideline for risk assessment and risk evaluation process (SEMI S10). Milpitas, CA: SEMI; 2020.
- Gadd S, Keeley D, Balmforth H. Good practice and pitfalls in risk assessment. Health & Safety Laboratory. 2003 [cited 2023 Aug 31]. Available from: https://www.hse.gov.uk/Research/rrpdf/rr151.pdf.
- Park D-U, Byun H-J, Choi S-J, Jeong J-Y, Yoon C-S, Kim C-N, Ha KC, Park DY. Review on potential risk factors in wafer fabrication process of semiconductor industry. Kor J Occup Environ Med 2011;23(3):333-42. https://doi.org/10.35371/kjoem.2011.23.3.333
- Stewart J, Elkington K. Electronics: semiconductor manufacturing. Indus Hyg Aspects Plant Oper 1985;3:439-63.
- KOSHA. The chemcial hazard risk management: manual for chemical risk assessment, 2012. Ulsan: Korea Occupational Safety and Health Agency; 2012 [in Korean].
- Kim S, Yoon C, Ham S, Park J, Kwon O, Park D, Choi S, Kim S, Ha K, Kim W. Chemical use in the semiconductor manufacturing industry. Int J Occup Environ Health 2018;24(3-4):109-18. https://doi.org/10.1080/10773525.2018.1519957
- LaDou J. Potential occupational health hazards in the microelectronics industry. Scand J Work Environ Health 1983:42-6.
- Jang M, Yoon C, Park J, Kwon O. Evaluation of hazardous chemicals with material safety data sheet and by-products of a photoresist used in the semiconductor-manufacturing industry. Safety Health Work 2019;10(1):114-21. https://doi.org/10.1016/j.shaw.2018.08.001
- Paustenbach DJ. Assessment of the developmental risks resulting from occupational exposure to select glycol ethers within the semiconductor industry. J Toxicol Environ Health Part A Curr Issues 1988;23(1):29-75. https://doi.org/10.1080/15287398809531094
- Wald PH, Jones JR. Semiconductor manufacturing: an introduction to processes and hazards. Am J Indus Med 1987;11(2):203-21. https://doi.org/10.1002/ajim.4700110209
- Park D-U, Choi S, Lee S, Koh D-H, Kim H-R, Lee K-H, Park J. Occupational characteristics of semiconductor workers with cancer and rare diseases registered with a workers' compensation program in Korea. Safety Health Work 2019;10(3):347-54. https://doi.org/10.1016/j.shaw.2019.03.003
- Park D-U, Kim C-N, Jeong J-Y, Choi S, Ha K-C. Risk assessment in semiconductor industry: part 2. Exposure Assessment; 2009 [in Korean].
- ECETOC. ECETOC TRA version 3: background and rationale for the improvements. European Centre for Ecotoxicology and Toxicology of Chemicals Brussels; 2012.
- Tielemans E, Noy D, Schinkel J, Heussen H, Van Der Schaaf D, West J, Fransman W. Stoffenmanager exposure model: development of a quantitative algorithm. Ann Occup Hyg 2008;52(6):443-54.
- ISO E. Iec 31010: 2019, risk management - risk assessment techniques. Switzerland: ISO Geneva; 2019.
- Chalak MH, Kahani A, Bahramiazar G, Marashi Z, Popov TI, Dadipoor S, Ahmadi O. Development and application of a fuzzy occupational health risk assessment model in the healthcare industry. La Med Lavoro 2022;113(4).
- Nunes IL. Occupational safety and health risk assessment methodologies. OSH Wiki Networking Knowledge, EU-OSHA-European Agency for Safety and Health at Work; 2022.
- Russell R, Maidment S, Brooke I, Topping M. An introduction to a UK scheme to help small firms control health risks from chemicals. Ann Occup Hyg 1998;42(6):367-76. https://doi.org/10.1016/S0003-4878(98)00056-8
- Park D, Yang H, Jeong J, Ha K, Choi S, Kim C, Yoon C, Park D, Paek D. A comprehensive review of arsenic levels in the semiconductor manufacturing industry. Ann Occup Hyg 2010;54(8):869-79.
- Park J-H, Choi S, Koh D-H, Park J, Kim W, Park D-U. Characteristics of peak exposure of semiconductor workers to extremely low-frequency magnetic fields. Ann Work Expos Health 2023;67(4):508-17. https://doi.org/10.1093/annweh/wxad003
- Gadd S, Keeley D, Balmforth H. Pitfalls in risk assessment: examples from the UK. Safety Sci 2004;42(9):841-57. https://doi.org/10.1016/j.ssci.2004.03.003
- CropLife. Chemical exposure assessment and control during the manufacturing process. Brussels, Belgium: CropLife International; 2019.
- UofQueensland. Occupational health and safety risk assessment and management guideline; 2011.
- Pece S, Dascalescu A, Ruscu O. Risk assessment method for occupational accidents and diseases. Bucharest: Ministry of Labor and Social Protection; 1998.
- Lentz T, Seaton M, Rane P, Gilbert S, McKernan L, Whittaker C. Technical Report: the NIOSH occupational exposure banding process for chemical risk management. Cincinnati, US: National Institute for Occupational Safety and Health; 2019.
- ICMM. Good practice guidance on occupational health risk assessment. 2nd ed. London, UK: International Council on Mining & Metals; 2016.