초록
기존 보통포틀랜드시멘트를 사용하여 제작한 수로관은 시멘트의 수화생성물이 산에 취약한 특성으로 인하여 열화가 빠르게 진행되고 내구성이 저하되는 문제점이 발생되고 있다. 따라서 본 연구에서는 다양한 산업에서 발생되는 산업부산물인 고로슬래그와 플라이 애시를 이용하여 수로관을 제작하고 그 특성을 분석하였다. 실험결과 굳지 않은 콘크리트에서 슬럼프는 플라이애시의 볼베어링작용으로 인해 증가되는 경향을 나타내었고, 공기량은 미연탄분으로 인해 감소되어 내동해성에 대한 대책이 필요할 것으로 나타났다. 또한 압축강도는 증기양생을 통해 초기강도가 증가되었고, 슬래그 50 %이상의 배합에서는 OPC와 동등이상의 결과가 나타났다. 내산성결과는 질량감소율이 5 % 미만으로 나타나 내구성에 우수한 성능을 나타내었고, 벤치플룸의 휨파괴하중도 KS기준을 모두 상회하여 상용화가 가능할 것으로 판단된다.
Water pipes manufactured using existing Portland cement suffer from the problem of rapid deterioration and reduced durability due to the hydration product of cement being vulnerable to acids. Therefore, in this study, water pipes were manufactured using slag and fly ash, which are industrial by-products from various industries, and their characteristics were analyzed. As a result of the experiment, slump in unhardened concrete tended to increase due to the ball bearing action of fly ash, and the amount of air was reduced due to unburned coal, indicating that measures for frost resistance were needed. In addition, the initial strength of the compressive strength was increased through steam curing, and the results were equal to or better than OPC when mixing more than 50 % of slag. The acid resistance results showed that the mass reduction rate was less than 5 %, showing excellent durability performance, and the bending failure load of the water pipe also exceeded the KS standards, so it is judged to be commercializable.