Journal of Drive and Control (드라이브 ㆍ 컨트롤)

The Korean Society for Fluid Power and Construction Equipment (유공압건설기계학회)
권호 표지
DOI QR코드

DOI QR Code

Accelerated Life Test Selection Study for Life Evaluation of Engine Type Drive Axle for Forklift

지게차용 엔진식 드라이브 액슬 수명평가를 위한 가속수명시험 선정 연구

  • Jun-Young Kim (Department of Mechanical Engineering, Inha University) ;
  • Yeong Jun Yu (Department of Construction Machinery Engineering, Inha University) ;
  • Chul-Hee Lee (Department of Mechanical Engineering, Inha University)
  • Received : 2023.08.21
  • Accepted : 2023.08.26
  • Published : 2023.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the selection of a reliable accelerated life test code for a 2-ton forklift was accomplished by choosing the driving resistance coefficient failure-free test time based on a 10,000-hour B10 life. The overall life and average equivalent load of the vehicle were then calculated based on actual driving test conditions using the selected driving resistance coefficient. The gear train's accelerated life test code was selected by adjusting the equivalent load to a torque and rotation speed that did not exceed 125%(about 75HP) of the vehicle rated power. The safety of the test standards was validated by conducting an actual accelerated life test utilizing the proposed test method in this study and comparing the test result with the corresponding theoretical value. It is anticipated that the reliability of the accelerated life test in this paper will be enhanced, by incorporating actual driving performance data collected directly from the forklift and adjusting the conditions used in developing the accelerated life test code.

Keywords

Acknowledgement

이 논문은 2023년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구임(P0012769, 2023년 산업혁신인재성장지원사업)

References

  1. S. J. Cho, et. al.,"Development of the 80-kW Test Tractor for Load Measurement of Agricultural Operations", Journal of Drive and Control, Vol.19, No.4 pp46-53, 2022 https://doi.org/10.7839/KSFC.2022.19.4.046
  2. Y. H. Choi, et. al.,"Thermal Flow Analysis of an Engine Room using a Porous Media Model for Imitating Flow Rate Reduction at Outlet of Industrial Machines", Journal of Drive and Control, Vol.19, No.1 pp62-68, 2022 https://doi.org/10.7839/KSFC.2022.19.1.062
  3. Y. B. Lee, et. al.,"A Study on the Acceleration Durability Test of In-Wheel Drive Gearbox for Military Special Vehicles", Journal of Drive and Control, Vol.19, No.3 pp32-38, 2022
  4. J. H . Choet. al.,"Development of an Unmanned Test System Based on Forklift for Mast Operation Durability", Journal of Drive and Control, Vol.19, No.4 pp70-76, 2022 https://doi.org/10.7839/KSFC.2022.19.4.070
  5. J. H. Lee. "A Study on Structural Analysis and Application of Accelerated Life Test for Steering Axle of Electric Forklift" Kyungsang National University, Masters Thesis, 2019.
  6. K. B. Yang. "A study for the enhancement of the fuel efficiency of eco-marathon vehicle" Kunsan National University, Masters Thesis, 2003.