References
- M. Wataru, H. Takeda, K. Shirai, T. Saegusa, Thermal hydraulic analysis compared with tests of full-scale concrete casks, Nucl. Eng. Des. 238 (2008) 1213-1219, https://doi.org/10.1016/j.nucengdes.2007.03.036.
- L.E. Herranz, J. Penalva, F. Feria, CFD analysis of a cask for spent fuel dry storage: model fundamentals and sensitivity studies, Ann. Nucl. Ener. 76 (2015) 54-62, https://doi.org/10.1016/j.anucene.2014.09.032.
- Y.S. Jeong, I.C. Bang, Hybrid heat pipe based passive cooling device for spent nuclear fuel dry storage cask, App. Therm. Eng. 96 (2016) 277-285, https://doi.org/10.1016/j.applthermaleng.2015.11.086.
- M.G. El-Samrah, A.F. Tawfic, S.E. Chidiac, Spent nuclear fuel interim dry storage: design requirements, most common methods, and evolution: a review, Ann. Nucl. Energy 160 (2021), 108408, https://doi.org/10.1016/j.anucene.2021.108408.
- S. Alyokhina, A. Kostikov, Unsteady heat exchange at the dry spent nuclear fuel storage, Nucl. Eng. Technol. 49 (2017) 1457-1462, https://doi.org/10.1016/j.net.2017.07.029.
- M. Hanifehzadeh, B. Gencturk, R. Mousavi, A numerical study of spent nuclear fuel dry storage systems under extreme impact loading, Eng. Struct. 161 (2018) 68-81, https://doi.org/10.1016/j.engstruct.2018.01.068.
- IAEA Safety Standards SeriesNo, SSR-6 (Rev.1), Regulations for the safe transport of radioactive, Mat. Specif. Saf. Require. (2018) 165.
- K.S. Bang, S.H. Yu, J.C. Lee, K.S. Seo, W.S. Choi, Experimental assessment on the thermal effects of the neutron shielding and heat-transfer fin of dual purpose casks on open pool fire, Nucl. Eng. Des. 304 (2016) 63-69, https://doi.org/10.1016/j.nucengdes.2016.04.040.
- R.L. Frano, G. Pugliese, G. Forasassi, Thermal analysis of a spent fuel cask in different transport conditions, Energy 36 (2011) 2285-2293, https://doi.org/10.1016/j.energy.2010.01.041.
- Y.S. Tseng, J.R. Wang, F.P. Tsai, Y.H. Cheng, C. Shih, Thermal design investigation of a new tube-type dry-storage system through CFD simulations, Ann. Nucl. Energy 38 (2011) 1088-1097, https://doi.org/10.1016/j.anucene.2011.01.001.
- J. Li, Y.Y. Liu, Thermal modelling of a vertical dry storage cask for used nuclear fuel, Nucl. Eng. Des. 301 (2016) 74-88, https://doi.org/10.1016/j.nucengdes.2016.01.008.
- J. Benavides, G. Jimenez, M. Galban, M. Lloret, Methodology for thermal analysis of spent nuclear fuel dry cask using CFD codes, Ann. Nucl. Energy 133 (2019) 257-274, https://doi.org/10.1016/j.anucene.2019.05.026.
- S.H. Yoo, H.C. No, H.M. Kim, E.H. Lee, Full-scope simulation of a dry storage cask using computational fluid dynamics, Nucl. Eng. Des. 240 (2010) 4111-4122, https://doi.org/10.1016/j.nucengdes.2010.08.009.
- J.M. Creeret, et al., The TN-24P PWR spent fuel storage cask: testing and analysis, in: EPRI NP-5128, PNL-6054, Pacific Northwest Laboratory, 1987.
- R.A. Brewster, E. Baglietto, E. Volpenhein, C.S. Bajwa, CFD analyses of the TN-24p PWR spent fuel storage cask, in: The ASME 2012 Pressure Vessels & Piping Division Conference, 2012, https://doi.org/10.1115/PVP2012-78491. Paper No.PVP2012-78491, Toronto, USA, July 15-17.
- P. Poskas, A. Smaizys, V. Simonis, Radiological and thermal characteristics of CASTOR RBMK-1500 and CONSTOR RBMK-1500 casks for spent nuclear fuel storage at ignalina nuclear power plant, Kerntechnik 71 (2006) 222-227, https://doi.org/10.3139/124.100297.
- R. Poskas, V. Simonis, P. Poskas, A. Sirvydas, Thermal analysis of CASTOR RBMK-1500 casks during long-term storage of spent nuclear fuel, Ann. Nucl. Energy 99 (2017) 40-46, https://doi.org/10.1016/j.anucene.2016.09.031.
- Ye.T. Koyanbayev, M.K. Skakov, D.A. Ganovichev, Ye.A. Martynenko, A.A. Sitnikov, Simulation of the thermal conditions of cask with fuel assemblies of BN-350 reactor for dry storage, Sci. Technol. Nucl. Install. vol. 2019 (2019) Article ID 3045897, 5 pages, doi:10.1155/2019/3045897.
- W.J. Cho, S. Kwon, K.S. Kim, Rock cavern storage of spent fuel, J. Nucl. Fuel Cycle Waste Technol. 13 (2015) 301-313, https://doi.org/10.7733/jnfcwt.2015.13.4.301.
- S.H.A. Latif, M.M. Kandil, A.M. Refaey, S.A. Elnaggar, Simulation of partial and complete loss of flow accidents for GPWR using ATHLET code, Int. J. Thermofluids 11 (2021), 100097, https://doi.org/10.1016/j.ijft.2021.100097.
- B. Almomania, D. Janga, S. Leeb, H.G. Kang, Development of a probabilistic safety assessment framework for an interim dry storage facility subjected to an aircraft crash using best-estimate structural analysis, Nucl. Eng. Technol. 49 (2017) 411-425, https://doi.org/10.1016/j.net.2016.12.013.
- C.S. Bajwa, An Analysis of a Spent Fuel Transportation Cask under Severe Fire Accident Conditions, 2002. Technical Report, https://www.nrc.gov/docs/ML0216/ML021690443.pdf.
- D. Sanyal, P. Goyal, V. Verma, A. Chakraborty, A CFD analysis of thermal behaviour of transportation cask under fire test conditions, Nucl. Eng. Des. 241 (2011) 3178-3189, https://doi.org/10.1016/j.nucengdes.2011.06.017.
- P. Geraldini, A. Lorenzo, Numerical Analysis and Experimental Verification of a Fire Resistant Overpack for Nuclear Waste, Proc. 2016 COMSOL Conference, Munich, Germany, 2016.
- R. Po skas, P. Po skas, K. Ra ckaitis, R. Zujus, A numerical study of thermal behavior of CASTOR RBMK-1500 cask under fire conditions, Nucl. Eng. Des. 376 (2021), 111131, https://doi.org/10.1016/j.nucengdes.2021.111131.
- R. Po skas, V. Simonis, H. Jouhara, P. Po skas, Modeling of decay heat removal from CONSTOR RBMK-1500 casks during long-term storage of spent nuclear fuel, Energy 170 (2019) 978-985, https://doi.org/10.1016/j.energy.2018.12.217.
- J.C. Lee, W.S. Choi, K.S. Bang, K.S. Seo, S.Y. Yoo, Thermal-fluid flow analysis and demonstration test of a spent fuel storage system, Nucl. Eng. Des. 239 (2009) 551-558, https://doi.org/10.1016/j.nucengdes.2008.12.015.
- A.V. Vatulin, A.G. Ioltukhovskiy, I.M. Kadarmetov, et al., Validation of dry storage modes for RBMK-1000 spent fuel assembles (SFA) (IAEA-CN-102/39), in: Storage of Spent Fuel from Power Reactors. Proceedings of International Conference, IAEA, Vienna, Austria, 2003, pp. 422-430.
- V.I. Kalinkin, V.G. Kritskij, N.N. Davidenko, et al., Technology of SNF RBMK1500 Transfer from ''Wet" to ''Dry" Storage, JSC Head Institute VNIPIET and JSC Concern Rosenergoatom, St. Petersburg, Russia, 2010.
- J.C. Lee, K.S. Bang, K.S. Seo, H.D. Kim, B.I. Choi, H.Y. Lee, Thermal analysis of a spent fuel storage cask under normal and off-normal conditions, J. Korean Rad. Waste Soc. 2 (2004) 13-22.
- E. Bich, J. Milat, E. Vogel, The viscosity and thermal conductivity of pure monatomic gases from their normal boiling point up to 5000 K in the limit of zero density and at 0.101325 MPa, J. Phys. Chem. Ref. Data 19 (1990) 1289-1305. https://doi.org/10.1063/1.555846
- M.D. Valkeneer, Spent Fuel Management in Belgium, 1995. Proc. of IAEA-NEA Symposium Safety and Engineering Aspects of Spent Fuel Storage. IAEA-SM-335/3.
- D. Dougal, An Introduction to Fire Dynamics, third ed., Wiley., 2011.
- J.Y. Murthy, S.R. Mathur, Finite volume method for radiative heat transfer using unstructured meshes, J. Thermophys. Heat Trans. 12 (1998) 313-321. https://doi.org/10.2514/2.6363
- P.J. Roache, Quantification of uncertainty in computational fluid dynamics, Annu. Rev. Fluid Mech. 29 (1997) 123-160. https://doi.org/10.1146/annurev.fluid.29.1.123