한국건축시공학회지 (Journal of the Korea Institute of Building Construction)

  • 제23권1호
  • /
  • Pages.23-33
  • /
  • 2023
  • /
  • 1598-2033(pISSN)
  • /
  • 2233-5706(eISSN)
한국건축시공학회 (The Korean Institute of Building Construction)
권호 표지
DOI QR코드

DOI QR Code

고온에 노출된 국내산 낙엽송 구조용 집성재 기둥의 탄화 특성

Charring Properties of Glued Laminated Timber Columns using Domestic Larch Exposed to High Temperatures

  • An, Jae-Hong (Department of Construction Test & Certification Center, Korea Institute of Civil Engineering and Building Technology) ;
  • Choi, Yun-Jeong (Department of Construction Test & Certification Center, Korea Institute of Civil Engineering and Building Technology) ;
  • Kim, Se-Jong (Research Planning and Coordination Division, National Institute of Forest Science)
  • 투고 : 2022.10.26
  • 심사 : 2023.01.09
  • 발행 : 2023.02.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

목구조 건축물의 목재 구조부재는 내화 설계시 국제적으로 탄화 속도나 탄화 두께를 사용하며, 국내에서도 내화구조 인정시 탄화 두께 기준을 적용한다. 본 연구에서는 국내산 낙엽송으로 제작된 구조용 집성재 기둥의 탄화 특성에 대하여 내화시험을 실시하여 탄화 특성, 하중비에 따른 영향 및 유로코드(Euro code)에서 제시한 탄화 속도와 비교 분석하였다. 내화시험 결과 탄화 두께는 단면 코너 부위의 영향을 보이는 것으로 나타났으며 하중비 0.9 이하에서는 하중비가 탄화 두께에 미치는 영향은 미미한 것으로 나타났다.

It is widely known that the level of fire resistance of wooden structure is determined by a charring rate or charring depth, and these are adopted for fire design. In this study, specimens of domestic larch column with a lamination wooden type were prepared and the fire resistance properties such as the charring depth, load ratio and the specific charring rate suggested by EN Code investigated. Test results showed that as expected, the weakest part was the corner of the column, so that the charring depth of the corner was deeper than the other parts of the column. For the load ratio less than 0.9, it had little effect on the charring depth.

키워드

과제정보

This research was supported by National Institute of Forest Science of Korea(Project No. 20190248-001).

참고문헌

  1. Yeo IW, Park KH, Cho KS, Min BY, Yoon MO. An experimental study on the charring rate of solid sawn timber exposed to fire. Journal of the Korea Insistute of Fire Science and Engineering. 2011 Jun;25(3):78-84.
  2. Bowyer JL, Shmulsky R, Haygreen JG. Forest products and wood science. 4th ed. Ames (IA): Iowa state university press; 2003. Chapter 10, Strength and structure; p. 242-72.
  3. Dark horse of eco-friendly material, carbon storage 'wood' is everything [Internet]. Seoul (Korea): National Institute of Forest Science Webzine. 2022 Dec 8. Available from: https://know.nifos.go.kr/webzine/201808/bigdata.do
  4. Kim HJ. Study on the internal temperature of flame resistant treated wood exposed to a standard fire. Journal of the Korea Institute of Fire Science and Engineering. 2018 Jun;32(3):14-8. https://doi.org/10.7731/KIFSE.2018.32.3.014
  5. Dietenberger MA, Hasburgh LE, Yedinak KM. Wood Handbook. Madison (WI): Forest Products Laboratory; 2021. Chapter 18, Fire Safety of Wood Consrtruction; p. 18.10-18.11.
  6. Buchanan AH, Abu AK. Structural design for fire safety. 2nd ed. Chichester (United Kingdom): John Wiley & Sons; 2017. Chapter 9, Timber structures; p. 273-82.
  7. EN 1995-1. Eurocode 5-Design of timber structures Part1-2 General rules-Structural fire design. European Union: European committee for standardization; 2004. p. 20-3.
  8. KS F 2257-1. Methods of fire resistance test for elements of building construction-General requirements. Seoul (Korea): Korean Standards Association; 2019. p. 10-9.
  9. KS F 2257-7. Methods of fire resistance test for elements of building construction-Specific requirements for columns. Seoul (Korea): Korean Standards Association; 2019. p. 5.