DOI QR코드

DOI QR Code

Semi-Rigid connections in steel structures: State-of-the-Art report on modelling, analysis and design

  • Celik, Huseyin Kursat (Department of Civil Engineering, the Graduate School of Natural and Applied Sciences, Dokuz Eylul University, Tinaztepe Campus) ;
  • Sakar, Gokhan (Department of Civil Engineering, Faculty of Engineering, Dokuz Eylul University, Tinaztepe Campus)
  • Received : 2022.02.23
  • Accepted : 2022.10.06
  • Published : 2022.10.10

Abstract

In the structural analysis of steel frames, joints are generally considered as rigid or hinged considering their moment transfer ability. However, the first studies conducted with the beginning of the 20th century showed that the joints do not actually fit these two definitions. In reality, a joint behaves between these two extreme points and is called semi-rigid. Including the actual state of the joint in the structural analysis provides significant economic advantages, so the subject is an intense field of study today. However, it does not find enough application area in practice. For this reason, a large-scale literature published from the first studies on the subject to the present has been examined within the scope of the study. Three important points have been identified in order to examine a joint realistically; modelling the load-displacement relationship, performing the structural analysis and how to design. Joint modelling methods were grouped under 7 main headings as analytical, empirical, mechanical, numerical, informational, hybrid and experimental. In addition to the moment-rotation, other important external load effects like axial force, shear and torsion were considered. Various evaluations were made to expand the practical application area of semi-rigid connections by examining analysis methods and design approaches. Dynamic behaviour was also included in the study, and besides column-beam connections, other important connection types such as beam-beam, column-beam-cross, base connection were also examined in this paper.

Keywords

Acknowledgement

This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.

References

  1. Abdalla, K.M. and Chen, W.F. (1995), "Expanded database of semi-rigid steel connections", Comput. Struct., 56(4), 553-564. https://doi.org/10.1016/0045-7949(94)00558-K
  2. Abdalla, K.M. and Stavroulakis, G.E. (1995), "A backpropagation neural network model for semi-rigid steel connections", Comput. Aid. Civil Infrastruct. Eng., 10(2), 77-87. https://doi.org/10.1111/j.1467-8667.1995.tb00271.x
  3. Abdalla, K.M., Drosopoulos, G.A. and Stavroulakis, G.E. (2015), "Failure behavior of a top and seat angle bolted steel connection with double web angles", J. Struct. Eng., 141(7), 04014172. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001132
  4. Abdollahzadeh, G.R. and Ghobadi, F. (2014), "Composed Mathematical-Informational modeling of column-base connections", Latin American J. Solids Struct., 11(8), 1417- 1431. https://doi.org/10.1590/S1679-78252014000800008
  5. Abdollahzadeh, G. and Ghobadi, F. (2014), "Mathematical modeling of column-base connections under monotonic loading", Civil Eng. Infrastruct. J., 47(2), 255-272. https://doi.org/10.7508/CEIJ.2014.02.008
  6. Abdollahzadeh, G., Hashemi, S.M., Tavakoli, H. and Rahami, H. (2014), "Determination of hysteretic behavior of steel end-plate beam-to-column connection with mechanical and neural network modeling", Arabian J. Sci. Eng., 39(11), 7661-7671. https://doi.org/10.1007/s13369-014-1348-4
  7. Abidelah, A., Bouchair, A. and Kerdal, D.E. (2012), "Experimental and analytical behavior of bolted end-plate connections with or without stiffeners", J. Construct. Steel Res., 76, 13-27. https://doi.org/10.1016/j.jcsr.2012.04.004
  8. Abolmaali, A., Kukreti, A., Motahari, A. and Ghassemieh, M. (2009), "Energy dissipation characteristics of semi-rigid connections", J. Construct. Steel Res., 65(5), 1187-1197. https://doi.org/10.1016/j.jcsr.2008.05.014
  9. Abolmaali, A., Matthys, J.H., Farooqi, M. and Choi, Y. (2005), "Development of moment-rotation model equations for flush end-plate connections", J. Construct. Steel Res., 61(12), 1595-1612. https://doi.org/10.1016/j.jcsr.2005.05.004
  10. Abolmaali, A., Razavi, M. and Radulova, D. (2012), "On the concept of earthquake resistant hybrid steel frames", J. Construct. Steel Res., 68(1), 34-42. https://doi.org/10.1016/j.jcsr.2011.07.001
  11. Abou-zidan, A. and Liu, Y. (2015), "Numerical study of unstiffened extended shear tab connections", J. Construct. Steel Res., 107, 70-80. https://doi.org/10.1016/j.jcsr.2015.01.008
  12. Adany, S. and Dunai, L. (2004), "Finite element simulation of the cyclic behaviour of end-plate joints", Comput. Struct., 82(23-26), 2131-2143. https://doi.org/10.1016/j.compstruc.2004.03.062.
  13. Ahmed, A. (2017), "Prediction of moment-rotation characteristic of top-and seat-angle bolted connection incorporating prying action", J. Adv. Struct. Eng., 9(1), 79-93. https://doi.org/10.1007/s40091-017-0150-4
  14. Ahmed, A. and Kishi, N. (2017), "Modified three-parameter power model to predict moment-rotation curve of top-and seatangle connection", American J. Civil Eng., 5(1), 50-59. https://doi.org/10.11648/j.ajce.20170501.17
  15. Ahmed, B. and Nethercot, D.A. (1997), "Prediction of initial stiffness and available rotation capacity of major axis composite flush endplate connections", J. Construct. Steel Res., 41(1), 31-60. https://doi.org/10.1016/S0143-974X(96)00053-3
  16. AISC 360-16 (2016), "Specification for structural steel buildings", American Institute of Steel Construction, Chicago, Illinois, USA.
  17. Al Hijaj, M. and Mahamid, M. (2017), "Behavior of skewed extended shear tab connections part I: Connection to supporting web", J. Construct. Steel Res., 128, 305-320. https://doi.org/10.1016/j.jcsr.2016.08.024
  18. Al-Bermani, F.G.A., Li, B., Zhu, K. and Kitipornchai, S. (1994), "Cyclic and seismic response of flexibly jointed frames", Eng. Struct., 16(4), 249-255. https://doi.org/10.1016/0141-0296(94)90064-7
  19. Al-Bermani, F.G. and Kitipornchai, S. (1992), "Elastoplastic nonlinear analysis of flexibly jointed space frames", J. Struct. Eng., 118(1), 108-127. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:1(108)
  20. Alhasawi, A., Guezouli, S. and Couchaux, M. (2017), "Component-based model versus stress-resultant plasticity modelling of bolted end-plate connection: Numerical implementation", Structures, 11, 164-177. https://doi.org/10.1016/j.istruc.2017.05.004
  21. Alhendi, H. and Celikag, M. (2015), "Finite element prediction of reverse channel connections to tubular columns behavior", Eng. Struct., 100, 599-609. https://doi.org/10.1016/j.engstruct.2015.06.040
  22. Alhendi, H. and Celikag, M. (2015), "Parametric study on moment-rotation characteristics of reverse channel connections to tubular columns", J. Construct. Steel Res., 104, 261-273. https://doi.org/10.1016/j.jcsr.2014.10.009
  23. Anderson, D., Hines, E.L., Arthur, S.J. and Eiap, E.L. (1997), "Application of artificial neural networks to the prediction of minor axis steel connections", Comput. Struct., 63(4), 685-692. https://doi.org/10.1016/S0045-7949(96)00080-6
  24. Asl, M.H., Farivar, B. and Momenzadeh, S. (2019), "Investigation of the rigidity of welded shear tab connections", Eng. Struct., 179, 353-366. https://doi.org/10.1016/j.engstruct.2018.10.077
  25. Astaneh, A. (1989), "Demand and supply of ductility in steel shear connections", J. Construct. Steel Res., 14(1), 1-19. https://doi.org/10.1016/0143-974X(89)90067-9
  26. Astaneh-Asl, A., McMullin, K.M. and Call, S.M. (1993), "Behavior and design of steel single plate shear connections", J. Struct. Eng., 119(8), 2421-2440. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:8(2421)
  27. Attiogbe, E. and Morris, G. (1991), "Moment-rotation functions for steel connections", J. Struct. Eng., 117(6), 1703-1718. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:6(1703)
  28. Azizinamini, A. and Radziminski, J.B. (1989), "Static and cyclic performance of semirigid steel beam-to-column connections", J. Struct. Eng., 115(12), 2979-2999. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:12(2979)
  29. Bahaari, M.R. and Sherbourne, A.N. (1996), "3D simulation of bolted connections to unstiffened columns-II. Extended endplate connections", J. Construct. Steel Res., 40(3), 189-223. https://doi.org/10.1016/S0143-974X(96)00049-1
  30. Bahaari, M.R. and Sherbourne, A.N. (1997), "Finite element prediction of end plate bolted connection behavior. II: Analytic formulation", J. Struct. Eng., 123(2), 165-175. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:2(165)
  31. Bahaari, M. R. and Sherbourne, A.N. (2000), "Behavior of eightbolt large capacity endplate connections", Comput. Struct., 77(3), 315-325. https://doi.org/10.1016/S0045-7949(99)00218-7
  32. Baniotopoulos, C.C. and Wald, F. (2000), "The Paramount role of joints into the reliable response of structures: from the classic pinned and rigid joints to the notion of semi-rigidity", Proceedings of the NATO Advanced Research Workshop, Vol. 4, Springer Science and Business Media, New York, USA.
  33. Bayat, M. and Zahrai, S.M. (2017), "Seismic performance of midrise steel frames with semi-rigid connections having different moment capacity", Steel Compos. Struct, 25(1), 1-17. https://doi.org/10.12989/scs.2017.25.1.001.
  34. Bayo, E. and Gracia, J. (2019), "Stiffness modelling of 2D welded joints using metamodels based on mode shapes", J. Construct. Steel Res., 156, 242-251. https://doi.org/10.1016/j.jcsr.2019.02.017.
  35. Bayo, E., Cabrero, J.M. and Gil, B. (2006), "An effective component-based method to model semi-rigid connections for the global analysis of steel and composite structures", Eng. Struct., 28(1), 97-108. https://doi.org/10.1016/j.engstruct.2005.08.001
  36. Bayo, E., Gracia, J., Gil, B. and Goni, R. (2012), "An efficient cruciform element to model semirigid composite connections for frame analysis", J. Construct. Steel Res., 72, 97-104. https://doi.org/10.1016/j.jcsr.2011.11.006
  37. Bayo, E., Loureiro, A. and Lopez, M. (2015), "Shear behaviour of trapezoidal column panels. I: Experiments and finite element modelling", J. Construct. Steel Res., 108, 60-69. https://doi.org/10.1016/j.jcsr.2014.10.026
  38. Bayo, E., Loureiro, A. and Lopez, M. (2017), 03.28: "Performance of cruciform finite elements that model 2D steel joints with beams of unequal depth in frame analysis", CE/PAPERS, 1(2-3), 729-738. https://doi.org/10.1002/cepa.112
  39. Bayo, E., Loureiro, A., Lopez, M. and da Silva, L.S. (2017), "General component based cruciform finite elements to model 2D steel joints with beams of equal and different depths", Eng. Struct., 152, 698-708. https://doi.org/10.1016/j.engstruct.2017.09.042
  40. Beaufoy, L.A. and Moharram, A. (1948), "Derived moment-angle curves for web-cleat connections", Preliminary Publication, International Association for Bridge and Structural Engineering, 3rd Congress, IABSE, Switzerland. http://doi.org/10.5169/seals-4002
  41. Beland, T., Tremblay, R., Hines, E.M. and Fahnestock, L.A. (2020), "Full-scale cyclic rotation and shear-load testing of double web with top and seat angle beam-column connections", J. Struct. Eng., 146(8), 04020164. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002685.
  42. Bernuzzi, C. (1998), "Prediction of the behaviour of top-and-seat cleated steel beam-to-column connections under cyclic reversal loading", J. Earthq. Eng., 2(01), 25-58. https://doi.org/10.1080/13632469809350313
  43. Bhatti, M.A. and Hingtgen, J.D. (1995), "Effects of connection stiffness and plasticity on the service load behavior of unbraced steel frames", Eng. J., 32(1), 163-165.
  44. Bjorhovde, R., Colson, A. and Brozzetti, J. (1990), "Classification system for beam-to-column connections", J. Struct. Eng., 116(11), 3059-3076. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(3059)
  45. Bose, B., Wang, Z.M. and Sarkar, S. (1997), "Finite-element analysis of unstiffened flush end-plate bolted joints", J. Struct. Eng., 123(12), 1614-1621. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:12(1614)
  46. Bose, S.K., McNeice, G.M. and Sherbourne, A.N. (1972), "Column webs in steel beam-to-column connexions part I-Formulation and verification", Comput. Struct., 2(1-2), 253-279. https://doi.org/10.1016/0045-7949(72)90030-2
  47. Boudia, S.B.M., Boumechra, N., Bouchair, A. and Missoum, A. (2020), "Modeling of bolted endplate beam-to-column joints with various stiffeners", J. Construct. Steel Res., 167, 105963. https://doi.org/10.1016/j.jcsr.2020.105963
  48. Brunesi, E., Nascimbene, R. and Rassati, G.A. (2014), "Response of partially-restrained bolted beam-to-column connections under cyclic loads", J. Construct. Steel Res., 97, 24-38. https://doi.org/10.1016/j.jcsr.2014.01.014
  49. Bursi, O.S. and Jaspart, J.P. (1998), "Basic issues in the finite element simulation of extended end plate connections", Comput. Struct., 69(3), 361-382. https://doi.org/10.1016/S0045-7949(98)00136-9
  50. Cabrero, J.M. and Bayo, E. (2005), "Development of practical design methods for steel structures with semi-rigid connections", Eng. Struct., 27(8), 1125-1137. https://doi.org/10.1016/j.engstruct.2005.02.017
  51. Cabrero, J.M. and Bayo, E. (2007), "The semi-rigid behaviour of three-dimensional steel beam-to-column steel joints subjected to proportional loading. Part II: Theoretical model and validation", J. Construct. Steel Res., 63(9), 1254-1267. https://doi.org/10.1016/j.jcsr.2006.11.005
  52. Cevik, A. (2007), "Genetic programming based formulation of rotation capacity of wide flange beams", J. Construct. Steel Res., 63(7), 884-893. https://doi.org/10.1016/j.jcsr.2006.09.004
  53. Chasten, C.P., Lu, L. W. and Driscoll, G.C. (1992), "Prying and shear in end-plate connection design", J. Struct. Eng., 118(5), 1295-1311. https://doi.org/10.1061/(ASCE)0733- 9445(1992)118:5(1295)
  54. Chenaghlou, M.R. and Nooshin, H. (2015), "Axial force-bending moment interaction in a jointing system: Part II: Analytical study", J. Construct. Steel Res., 113, 277-285. https://doi.org/10.1016/j.jcsr.2015.06.010
  55. Chisala, M.L. (1999), "Modelling M-φ curves for standard beamto-column connections", Eng. Struct., 21(12), 1066-1075. https://doi.org/10.1016/S0141-0296(98)00033-9
  56. Chmielowiec M, (1987), "Moment-rotation curves for partially restrained steel connections", M.Sc. Dissertation, University of Arizona, Arizona.
  57. Citipitioglu, A.M., Haj-Ali, R.M. and White, D.W. (2002), "Refined 3D finite element modeling of partially-restrained connections including slip", J. Construct. Steel Res., 58(5-8), 995-1013. https://doi.org/10.1016/S0143-974X(01)00087-6
  58. Cloete, R. and Roth, C.P. (2021), "Column base connections under compression and biaxial moments: Experimental and numerical investigations", J. Construct. Steel Res., 184, 106834. https://doi.org/10.1016/j.jcsr.2021.106834
  59. Coelho, A.G., da Silva, L.S. and Bijlaard, F.S. (2006), "Ductility analysis of bolted extended end plate beam-to-column connections in the framework of the component method", Steel Compos. Struct., 6(1), 33-53. https://doi.org/10.12989/scs.2006.6.1.033
  60. Coelho, A.M.G. (2013), "Rotation capacity of partial strength steel joints with three-dimensional finite element approach", Comput. Struct., 116, 88-97. https://doi.org/10.1016/j.compstruc.2012.10.024
  61. Coelho, A.M.G., da Silva, L.S. and Bijlaard, F.S. (2004), "Characterization of the nonlinear behaviour of single bolted TStub connections", Proceeding of Connections in Steel Structures V, Amsterdam, June.
  62. Couchaux, M. and Rodier, A. (2017), "Behavior of bolted endplate connections of beams subjected to biaxial bending moments and axial forces", Eurosteel Conference, Copenhagen, September.
  63. Cruz, P.J., da Silva, L.S., Rodrigues, D.S. and Simoes, R.A.D. (1998), "Database for the semi-rigid behaviour of beam-tocolumn connections in seismic regions", J. Construct. Steel Res., 1(46), 233-234.
  64. Da Silva, L.S. (2008), "Towards a consistent design approach for steel joints under generalized loading", J. Construct. Steel Res., 64(9), 1059-1075. https://doi.org/10.1016/j.jcsr.2008.02.017
  65. Da Silva, L.S. and Coelho, A.G. (2001), "An analytical evaluation of the response of steel joints under bending and axial force", Comput. Struct., 79(8), 873-881. https://doi.org/10.1016/S0045-7949(00)00179-6
  66. Da Silva, L.S., Coelho, A.G. and Neto, E.L. (2000), "Equivalent post-buckling models for the flexural behaviour of steel connections", Comput. Struct., 77(6), 615-624. https://doi.org/10.1016/S0045-7949(00)00015-8
  67. Dabaon, M.A., El-Boghdadi, M.H. and Kharoob, O.F. (2009), "Experimental and numerical model for space steel and composite semi-rigid joints", J. Construct. Steel Res., 65(8-9), 1864-1875. https://doi.org/10.1016/j.jcsr.2009.04.024
  68. D'Alessandro, E., Brando, G. and De Matteis, G. (2018), "Design charts for end-plate beam-to-column steel joints", Proceedings of the Institution of Civil Engineers-Structures and Buildings, 171(6), 444-462. https://doi.org/10.1680/jstbu.16.00203
  69. Daneshvar, H. and Driver, R.G. (2018), "Behaviour of single angle connections under simultaneous shear, tension and moment", Structures, 15,13-27. https://doi.org/10.1016/j.istruc.2018.05.005
  70. Dang, X. and Tan, Y. (2005), "An inner product-based dynamic neural network hysteresis model for piezoceramic actuators", Sensors Actuators A: Phys., 121(2), 535-542. https://doi.org/10.1016/j.sna.2005.04.003
  71. Davaran, A., Beland, T. and Tremblay, R. (2019), "Elastic-plastic analysis of bolted angles usable in steel frame connections", J. Struct. Eng., 145(7), 04019048. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002320
  72. De Lima, L.R. O., De Andrade, S.A.L., Vellasco, P.D.S. and Da Silva, L. S. (2002), "Experimental and mechanical model for predicting the behaviour of minor axis beam-to-column semirigid joints", J. Mech. Sci., 44(6), 1047-1065. https://doi.org/10.1016/S0020-7403(02)00013-9
  73. De Lima, L.R.O., Vellasco, P.D.S., De Andrade, S.A.L., Da Silva, J.G.S. and Vellasco, M.M.B.R. (2005), "Neural networks assessment of beam-to-column joints", J. Brazilian Soc. Mech. Sci. Eng., 27(3), 314-324. https://doi.org/10.1590/S1678-58782005000300015
  74. de Oliveira, T.J.L. and de Miranda Batista, E. (2009), "Modelling beam-to-girder semi-rigid composite connection with angles including the effects of concrete tension stiffness", Eng. Struct., 31(8), 1865-1879. https://doi.org/10.1016/j.engstruct.2009.03.025
  75. De Stefano, M. and Astaneh, A. (1991), "Axial force-Displacement behavior of steel double angles", J. Construct. Steel Res., 20(3), 161-181. https://doi.org/10.1016/0143- 974X(91)90030-5
  76. De Stefano, M., De Luca, A. and Astaneh-Asl, A. (1994), "Modeling of cyclic moment-rotation response of double-angle connections", J. Struct. Eng., 120(1), 212-229. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:1(212)
  77. Degertekin, S.O. and Hayalioglu, M.S. (2004), "Design of nonlinear semi-rigid steel frames with semi-rigid column bases", Electronic J. Struct. Eng., 4, 1-16. https://doi.org/10.56748/ejse.437.
  78. Del Savio, A.A., Nethercot, D.A., Vellasco, P.C.G.S., Andrade, S. A.L. and Martha, L.F. (2009), "Generalised component-based model for beam-to-column connections including axial versus moment interaction", J. Construct. Steel Res., 65(8-9), 1876- 1895. https://doi.org/10.1016/j.jcsr.2009.02.011
  79. Dhillon, B.S. and O'Malley III, J.W. (1999), "Interactive design of semirigid steel frames", J. Struct. Eng., 125(5), 556-564. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(556)
  80. Diaz, C., Marti, P., Victoria, M. and Querin, O.M. (2011), "Review on the modelling of joint behaviour in steel frames", J. Construct. Steel Res., 67(5), 741-758. https://doi.org/10.1016/j.jcsr.2010.12.014
  81. Diaz, C., Victoria, M., Marti, P. and Querin, O.M. (2011), "FE model of beam-to-column extended end-plate joints", J. Construct. Steel Res., 67(10), 1578-1590. https://doi.org/10.1016/j.jcsr.2011.04.002
  82. Diaz, C., Victoria, M., Querin, O.M. and Marti, P. (2018), "FE model of three-dimensional steel beam-to-column bolted extended end-plate joint", J. Steel Struct., 18(3), 843-867. https://doi.org/10.1007/s13296-018-0033-y
  83. Driscoll, G.C. (1987), "Elastic-plastic analysis of top-and-seatangle connections", J. Construct. Steel Res., 8, 119-135. https://doi.org/10.1016/0143-974X(87)90056-3
  84. El-Khoriby, S., Sakr, M.A., Khalifa, T.M. and Eladly, M.M. (2017), "Modelling and behaviour of beam-to-column connections under axial force and cyclic bending", J. Construct. Steel Res., 129, 171-184. https://doi.org/10.1016/j.jcsr.2016.11.006
  85. ElSabbagh, A., Sharaf, T., Nagy, S. and ElGhandour, M. (2019), "Behavior of extended end-plate bolted connections subjected to monotonic and cyclic loads", Eng. Struct., 190, 142-159. https://doi.org/10.1016/j.engstruct.2019.04.016
  86. Ermopoulos, J.C. and Stamatopoulos, G.N. (1996), "Analytical modelling of column-base plates under cyclic loading", J. Construct. Steel Res., 40(3), 225-238. https://doi.org/10.1016/S0143-974X(96)00043-0
  87. Ermopoulos, J.C. and Stamatopoulos, G.N. (1996), "Mathematical modelling of column base plate connections", J. Construct. Steel Res., 36(2), 79-100. https://doi.org/10.1016/0143- 974X(95)00011-J
  88. EN 1993-1-8 (2003), Design of Steel Structures, Part 1.8: Design of Joints, European Committee for Standardisation, Brussels, Belgium.
  89. Fasaee, M.A.K., Banan, M.R. and Ghazizadeh, S. (2018), "Capacity of exposed column base connections subjected to uniaxial and biaxial bending moments", J. Construct. Steel Res., 148, 361-370. https://doi.org/10.1016/j.jcsr.2018.05.025
  90. Fernandez-Ceniceros, J., Sanz-Garcia, A., Antonanzas-Torres, F. and Martinez-de-Pison, F. J. (2015), "A numerical-informational approach for characterising the ductile behaviour of the T-stub component. Part 2: Parsimonious soft-computing-based metamodel", Eng. Struct., 82, 249-260. https://doi.org/10.1016/j.engstruct.2014.06.047
  91. Fernandez-Ceniceros, J., Sanz-Garcia, A., Antonanzas-Torres, F. and Martinez-de-Pison, F. J. (2015), "A numerical-informational approach for characterising the ductile behaviour of the T-stub component. Part 1: Refined finite element model and test validation", Eng. Struct., 82, 236-248. https://doi.org/10.1016/j.engstruct.2014.06.048
  92. Foley, C.M. and Vinnakota, S. (1995), "Toward design office moment-rotation curves for end-plate beam-to-column connections", J. Construct. Steel Res., 35(2), 217-253. https://doi.org/10.1016/0143-974X(94)00039-K
  93. Francavilla, A.B., Latour, M., Piluso, V. and Rizzano, G. (2015), "Simplified finite element analysis of bolted T-stub connection components", Eng. Struct., 100, 656-664. https://doi.org/10.1016/j.engstruct.2015.06.029
  94. Frye, M.J. and Morris, G.A. (1975), "Analysis of flexibly connected steel frames", Canadian J. Civil Eng., 2(3), 280-291. https://doi.org/10.1139/l75-026
  95. Gang, W. and Caiqi, Z. (2021), "Research on the M-θ model considering the effect of axial force and bolt clearance of flower-gusset composite joints", Structures, 34, 2164-2173. https://doi.org/10.1016/j.istruc.2021.08.025
  96. Gantes, C.J. and Lemonis, M.E. (2003), "Influence of equivalent bolt length in finite element modeling of T-stub steel connections", Comput. Struct., 81(8-11), 595-604. https://doi.org/10.1016/S0045-7949(03)00004-X
  97. Gao, L. and Haldar, A. (1995), "Nonlinear seismic analysis of space structures with partially restrained connections", Comput. Aid. Civil Infrastruct. Eng., 10(1), 27-37. https://doi.org/10.1111/j.1467-8667.1995.tb00383.x
  98. Gao, S. and Guo, L. (2018), "Study on the influence of connection configuration on composite joints", J. Steel Struct., 18(3), 1048-1062. https://doi.org/10.1007/s13296-018-0045-7
  99. Gebbeken, N., Rothert, H. and Binder, B. (1994), "On the numerical analysis of endplate connections", J. Construct. Steel Res., 30(2), 177-196. https://doi.org/10.1016/0143- 974X(94)90049-3
  100. Gerardy J.C., Schleich J.B. (1991), "Semi-rigid action in steel frame structures", Report no. 7210-SAl507, Arbed Recherches, Luxembourg.
  101. Gerardy J.C., Schleich J.B. (1991), "Semi-rigid action in steel frame structures", Report no. 7210-SAl507, Arbed Recherches, Luxembourg.
  102. Gerstle, K.H. and Ackroyd, M.H. (1990), "Behavior and design of flexibly-connected building frames", Eng. J., 27(1), 22-29.
  103. Ghassemieh, M. and Bahadori, A. (2015), "Seismic evaluation of a steel moment frame with cover plate connection considering flexibility by component method", Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics, Incheon, August.
  104. Ghobarah, A., Mourad, S. and Korol, R.M. (1996), "Momentrotation relationship of blind bolted connections for HSS columns", J. Construct. Steel Res., 40(1), 63-91. https://doi.org/10.1016/S0143-974X(96)00044-2.
  105. Gil, B. and Bayo, E. (2008), "An alternative design for internal and external semi-rigid composite joints. Part II: Finite element modelling and analytical study", Eng. Struct., 30(1), 232-246. https://doi.org/10.1016/j.engstruct.2007.03.010
  106. Gil, B. and Goni, R. (2015), "T-stub behaviour under out-of-plane bending. I: Experimental research and finite element modelling", Eng. Struct., 98, 230-240. https://doi.org/10.1016/j.engstruct.2015.03.041
  107. Gil, B. and Goni, R. (2015), "T-stub behaviour under out-of-plane bending. I: Experimental research and finite element modelling", Eng. Struct., 98, 230-240. https://doi.org/10.1016/j.engstruct.2015.03.041
  108. Gil, B., Goni, R. and Bayo, E. (2013), "Experimental and numerical validation of a new design for three-dimensional semi-rigid composite joints", Eng. Struct., 48, 55-69. https://doi.org/10.1016/j.engstruct.2012.08.034
  109. Gil, B., Goni, R. and Bayo, E. (2020), "Major axis steel joint with additional plates subjected to torsion: Stiffness characterization", Eng. Struct., 220, 111021. https://doi.org/10.1016/j.engstruct.2020.111021
  110. Gil, B., Goni, R., Bijlaard, F. and Bayo, E. (2019), "Major axis steel joint under torsion: Stiffness and strength characterization", Eng. Struct., 180, 586-602. https://doi.org/10.1016/j.engstruct.2018.11.060
  111. Gil-Martin, L. M. and Hernandez-Montes, E. (2020), "A compact and simpler formulation of the component method for steel connections", J. Construct. Steel Res., 164, 105782. https://doi.org/10.1016/j.jcsr.2019.105782
  112. Goto, Y. and Miyashita, S. (1998), "Classification system for rigid and semirigid connections", J. Struct. Eng., 124(7), 750-757. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:7(750)
  113. Goudarzi, A., Ghassemieh, M., Fanaie, N., Laefer, D.F. and Baei, M. (2017), "Axial load effects on flush end-plate moment connections", Proceedings of the Institution of Civil EngineersStructures and Buildings, 170(3), 199-210. https://doi.org/10.1680/jstbu.15.00042
  114. Goverdhan, A.V. (1984), "A Collection of experimental moment-rotation curves and valuation of prediction equations for semirigid connections", M.Sc. Dissertation, Vanderbilt University.
  115. Guzelbey, I.H., Cevik, A. and Gogus, M.T. (2006), "Prediction of rotation capacity of wide flange beams using neural networks", J. Construct. Steel Res., 62(10), 950-961. https://doi.org/10.1016/j.jcsr.2006.01.003
  116. Hadianfard, M.A. and Rahnema, H. (2010), "Effects of RHS face deformation on the rigidity of beam-column connection", Steel Compos. Struct., 10(6), 489-500. https://doi.org/10.12989/scs.2010.10.6.489
  117. Harada, Y. and da Silva, L.S. (2019), "Three-dimensional macromodeling of beam-to-rectangular hollow section column joints under cyclic loading. Part 1: Modeling of cyclic out-of-plane behavior of single isolated plate element", J. Construct. Steel Res., 162, 105713. https://doi.org/10.1016/j.jcsr.2019.105713
  118. Hasan, M.J., Ashraf, M. and Uy, B. (2017), "Moment-rotation behaviour of top-seat angle bolted connections produced from austenitic stainless steel", J. Construct. Steel Res., 136, 149-161. https://doi.org/10.1016/j.jcsr.2017.05.014
  119. Hasan, M.J., Ashraf, M., Al-Deen, S., Shill, S.K. and Uy, B. (2021), "Stainless steel top-seat angle beam-to-column connection: Full-scale test and analytical modelling", Structures, 34, 4322-4338. https://doi.org/10.1016/j.istruc.2021.10.053
  120. Hasan, R., Kishi, N. and Chen, W.F. (1998), "A new nonlinear connection classification system", J. Construct. Steel Res., 47(1-2), 119-140. https://doi.org/10.1016/S0143-974X(98)80105-3
  121. Heinisuo, M., Perttola, H. and Ronni, H. (2014), "A step towards the 3D component method for modelling beam-to-column joints", Steel Construct., 7(1), 8-13. https://doi.org/10.1002/stco.201350001
  122. Hong, K., Yang, J.G. and Lee, S.K. (2001), "Parametric study of double angle framing connections subjected to shear and tension", J. Construct. Steel Res., 57(9), 997-1013. https://doi.org/10.1016/S0143-974X(01)00019-0
  123. Hong, K., Yang, J. G. and Lee, S. K. (2002), "Moment-rotation behavior of double angle connections subjected to shear load", Eng. Struct., 24(1), 125-132. https://doi.org/10.1016/S0141-0296(01)00014-1
  124. Ihaddoudene, A.N.T., Saidani, M. and Chemrouk, M. (2009), "Mechanical model for the analysis of steel frames with semi rigid joints", J. Construct. Steel Res., 65(3), 631-640. https://doi.org/10.1016/j.jcsr.2008.08.010
  125. Ismail, R.E.S., Fahmy, A. S., Khalifa, A.M. and Mohamed, Y.M. (2016), "Numerical study on ultimate behaviour of bolted endplate steel connections", Latin American J. Solids Struct., 13(1), 1-22. https://doi.org/10.1590/1679-78251579
  126. Ivanyi, M. (2000), "Full-scale tests of steel frames with semi-rigid connection", Eng. Struct., 22(2), 168-179. https://doi.org/10.1016/S0141-0296(98)00106-0
  127. Ivanyi, M., Baniotopoulos, C.C. (2000), "Semi-rigid joints in structural steel-work", CISM Courses and Lectures, Volume 419, Springer, Wien, New York. https://doi.org/10.1007/978-3-7091-2478-9
  128. Jadid, M.N. and Fairbairn, D.R. (1996), "Neural-network applications in predicting moment-curvature parameters from experimental data", Eng. Appl. Artificial Intelligence, 9(3), 309-319. https://doi.org/10.1016/0952-1976(96)00021-8
  129. Jaspart, J.P., Wald, F., Weynand, K. and Gresnigt, A.M. (2008), "Steel column base classification", Heron, 53(1/2), https://hdl.handle.net/2268/26142
  130. Johnston, B.G. and Hechtman, R.A. (1940), "Design economy by connection restraint", Engineering News Record, October, 4-7.
  131. Jones, S.W., Kirby, P.A. and Nethercort, D.A. (1983), "The analysis of frames with semi-rigid connections-a state-of-theart report", J. Construct. Steel Res., 3(2), 2-13. https://doi.org/10.1016/0143-974X(83)90017-2
  132. Jones, S.W., Kirby, P.A. and Nethercot, D.A. (1980), "Effect of semi-rigid connections on steel column strength", J. Construct. Steel Res., 1(1), 38-46. https://doi.org/10.1016/0143-974X(80)90007-3
  133. Jones, S.W., Kirby, P.A. and Nethercot, D.A. (1981), "Modelling of semi-rigid connection behaviour and its influence on steel column behaviour", Proceedings of the international conference on joints in structural steelwork, 9, Pentech Press, London, United Kingdom.
  134. Jordao, S., Da Silva, L.S. and Simoes, R. (2013), "Behaviour of welded beam-to-column joints with beams of unequal depth", J. Construct. Steel Res., 91, 42-59. https://doi.org/10.1016/j.jcsr.2013.07.023
  135. Ju, S.H., Fan, C.Y. and Wu, G.H. (2004), "Three-dimensional finite elements of steel bolted connections", Eng. Struct., 26(3), 403-413. https://doi.org/10.1016/j.engstruct.2003.11.001
  136. Kanvinde, A.M., Grilli, D.A. and Zareian, F. (2012), "Rotational stiffness of exposed column base connections: Experiments and analytical models", J. Struct. Eng., 138(5), 549-560. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000495
  137. Kanvinde, A.M., Jordan, S.J. and Cooke, R.J. (2013), "Exposed column base plate connections in moment frames-Simulations and behavioral insights", J. Construct. Steel Res., 84, 82-93. https://doi.org/10.1016/j.jcsr.2013.02.015
  138. Kaushik, K., Sharma, A. and Kumar, R. (2014), "Modeling and FE analysis of column to beam end-plate bolted connection", Eng. Solid Mech., 2(1), 51-66. https://doi.org/10.5267/j.esm.2013.11.001
  139. Kennedy, D.J. (1969) "Moment-rotation characteristics of shear connections", Eng. J., 6, 105-115. https://trid.trb.org/view/105597. 105597
  140. Kennedy, D.L. and Hafez, M.A. (1984), "A study of end plate connections for steel beams", Canadian J. Civil Eng., 11(2), 139-149. https://doi.org/10.1139/l84-026
  141. Khodaie, S., Mohamadi-shooreh, M.R. and Mofid, M. (2012), "Parametric analyses on the initial stiffness of the SHS column base plate connections using FEM", Eng. Struct., 34, 363-370. https://doi.org/10.1016/j.engstruct.2011.09.026
  142. Khudada, A.E. and Geschwindner, L.F. (1997), "Nonlinear dynamic analysis of steel frames by modal superposition", J. Struct. Eng., 123(11), 1519-1527. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1519)
  143. Kim, J., Ghaboussi, J. and Elnashai, A.S. (2012), "Hysteretic mechanical-informational modeling of bolted steel frame connections", Eng. Struct., 45, 1-11. https://doi.org/10.1016/j.engstruct.2012.06.014
  144. Kishi, N. and Chen, W.F. (1986), "Steel construction data bank program", Structural Engineering Report No. CE-STR-86-18; Purdue University.
  145. Kishi, N. and Chen, W.F. (1986), Data Base of Steel Beam-ToColumn Connections, Structural Engineering Area, School of Civil Engineering, Purdue University, IN, USA.
  146. Kishi, N. and Chen, W.F. (1990), "Moment-rotation relations of semirigid connections with angles", J. Struct. Eng., 116(7), 1813-1834. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:7(1813)
  147. Kishi, N., Chen, W.F., Goto, Y. and Matsuoka, K. (1993), "Analysis program for the design of flexibly jointed frames", Comput. Struct., 49(4), 705-713. https://doi.org/10.1016/0045-7949(93)90073-M.
  148. Kishi, N., Komuro, M. and Chen, W.F. (2004), "Four-parameter power model for M-θr curves of end-plate connections", ECCS/AISC Workshop Connections in Steel Structures V: Innovative Steel Connections, Amsterdam, June.
  149. Koduru, S.D. and Driver, R.G. (2014), "Generalized componentbased model for shear tab connections", J. Struct. Eng., 140(2), 04013041. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000823.
  150. Komuro, M., Kishi, N. and Chen, W.F. (2004), "Elasto-plastic FE analysis on moment-rotation relations of top-and seat-angle connections", Connections in Steel Structures V, Amsterdam, June.
  151. Kong, Z. and Kim, S.E. (2015), "New moment rotation model of single web angle connections", J. Civil Environ. Eng., 9(7), 851-854.
  152. Kong, Z. and Kim, S.E. (2017), "Moment-rotation behavior of top-and seat-angle connections with double web angles", J. Construct. Steel Res., 128, 428-439. https://doi.org/10.1016/j.jcsr.2016.09.010
  153. Kong, Z. and Kim, S.E. (2017), "Moment-rotation model of single-web angle connections", J. Mech. Sci., 126, 24-34. https://doi.org/10.1016/j.ijmecsci.2017.03.008
  154. Kontoleon, M.J. and Baniotopoulos, C.C. (2000), "Computational aspects on the frictional unilateral contact problem arising on steel base plate connections", Comput. Struct., 78(1-3), 303- 309. https://doi.org/10.1016/S0045-7949(00)00082-1
  155. Kontoleon, M.J., Mistakidis, E.S., Baniotopoulos, C.C. and Panagiotopoulos, P.D. (1999), "Parametric analysis of the structural response of steel base plate connections", Comput. Struct., 71(1), 87-103. https://doi.org/10.1016/S0045-7949(98)00232-6
  156. Koriga, S., Ihaddoudene, A.N.T. and Saidani, M. (2019), "Numerical model for the non-linear dynamic analysis of multistorey structures with semi-rigid joints with specific reference to the Algerian code", Structures, 19, 184-192. https://doi.org/10.1016/j.istruc.2019.01.008
  157. Krishnamurthy, N. (1978), "A fresh look at bolted end-plate behavior and design", Eng. J., 15(2), 39-49. https://trid.trb.org/view/80657.
  158. Krishnamurthy, N. and Graddy, D.E. (1976), "Correlation between 2-and 3-dimensional finite element analysis of steel bolted endplate connections", Comput. Struct., 6(4-5), 381-389. https://doi.org/10.1016/0045-7949(76)90016-X
  159. Krishnamurthy, N., Huang, H.T., Jeffrey, P.K. and Avery, L.K. (1979), "Analytical M-θ curves for end-plate connections", J. Struct. Division, 105(1), 133-145. https://doi.org/10.1061/JSDEAG.0005073
  160. Krystosik, P. (2018), "Influence of supporting joints flexibility on statics and stability of steel frames", J. Steel Struct., 18(2), 433-442. https://doi.org/10.1007/s13296-018-0008-z
  161. Kueh, A.B.H. (2021), "Artificial neural network and regressed beam-column connection explicit mathematical momentrotation expressions", J. Build. Eng., 43, 103195. https://doi.org/10.1016/j.jobe.2021.103195
  162. Kukreti, A.R. and Abolmaali, A.S. (1999), "Moment-rotation hysteresis behavior of top and seat angle steel frame connections", J. Struct. Eng., 125(8), 810-820. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:8(810)
  163. Kukreti, A.R. and Biswas, P. (1997), "Finite element analysis to predict the cyclic hysteretic behavior and failure of end-plate connections", Comput. Struct., 65(1), 127-147. https://doi.org/10.1016/S0045-7949(95)00300-2
  164. Kukreti, A.R. and Zhou, F.F. (2006), "Eight-bolt endplate connection and its influence on frame behavior", Eng. Struct., 28(11), 1483-1493. https://doi.org/10.1016/j.engstruct.2005.09.021
  165. Kukreti, A.R., Murray, T.M. and Abolmaali, A. (1987), "End-plate connection moment-rotation relationship", J. Construct. Steel Res., 8, 137-157. https://doi.org/10.1016/0143-974X(87)90057-5
  166. Kukreti, A.R., Murray, T.M. and Ghassemieh, M. (1989), "Finite element modeling of large capacity stiffened steel tee-hanger connections", Comput. Struct., 32(2), 409-422. https://doi.org/10.1016/0045-7949(89)90052-7
  167. Kumar, S.S. and Rao, D.P. (2006), "RHS beam-to-column connection with web opening-experimental study and finite element modelling", J. Construct. Steel Res., 62(8), 739-746. https://doi.org/10.1016/j.jcsr.2005.11.016
  168. Kumar, S.S. and Smitha, M.S. (2013), "Steel-concrete composite flange plate connections: Cyclic performance and tests", J. Construct. Steel Res., 82, 216-222. https://doi.org/10.1016/j.jcsr.2013.01.003
  169. Latour, M. and Rizzano, G. (2019), "Mechanical modelling of exposed column base plate joints under cyclic loads", J. Construct. Steel Res., 162, 105726. https://doi.org/10.1016/j.jcsr.2019.105726
  170. Latour, M., Piluso, V. and Rizzano, G. (2014), "Rotational behaviour of column base plate connections: Experimental analysis and modelling", Eng. Struct., 68, 14-23. https://doi.org/10.1016/j.engstruct.2014.02.037
  171. Lee, K.S. and Han, S.E. (2011), "Semi-rigid elasto plastic post buckling analysis a space frame with finite rotation", Adv. Steel Construct., 7(3), 274-301. https://doi.org/10.18057/IJASC.2011.7.3.5
  172. Lee, S.L., Ting, L.C. and Shanmugam, N.E. (1993), "Use of external T-stiffeners in box-column to I-beam connections", J. Construct. Steel Res., 26(2-3), 77-98. https://doi.org/10.1016/0143-974X(93)90030-V
  173. Lee, S.S. and Moon, T.S. (2002), "Moment-rotation model of semi-rigid connections with angles", Eng. Struct., 24(2), 227- 237. https://doi.org/10.1016/S0141-0296(01)00066-9
  174. Lemonis, M.E. and Gantes, C.J. (2009), "Mechanical modeling of the nonlinear response of beam-to-column joints", J. Construct. Steel Res., 65(4), 879-890. https://doi.org/10.1016/j.jcsr.2008.11.007
  175. Leon, R. and Lin, J. (1986), "Towards the development of an analytical model for composite semi-rigid connections", Report to AISC, Structural Engineering Report No.86-06; University of Minnesota.
  176. Lewitt, C.W., Munse, W.H. and Chesson, E. (1969), Restraint Characteristics of Flexible Riveted and Bolted Beam-ToColumn Connections, Bullet No. 500, Engineering Experiment Station, University of Illinois at Urbana Champaign, Chicago, USA.
  177. Li, T.Q., Choo, B.S. and Nethercot, D.A. (1995), "Connection element method for the analysis of semi-rigid frames", J. Construct. Steel Res., 32(2), 143-171. https://doi.org/10.1016/0143-974X(95)93170-9
  178. Li, T.Q., Moore, D.B., Nethercot, D.A. and Choo, B.S. (1996), "The experimental behaviour of a full-scale, semi-rigidly connected composite frame: Overall considerations", J. Construct. Steel Res., 39(3), 167-191. https://doi.org/10.1016/S0143-974X(96)00040-5
  179. Lightfoot, E. and Baker, A.R. (1961), "The analysis of steel frames with elastic beam-column connections", Golden Jubilee Congress Symposium on the Design of High Buildings, Hong Kong University Press, Hong Kong.
  180. Lionberger, S.R. and Weaver Jr, W. (1969), "Dynamic response of frames with nonrigid connections", J. Eng. Mech. Division, 95(1), 95-114. https://doi.org/10.1061/JMCEA3.0001087
  181. Liu, J. and Astaneh-Asl, A. (2004), "Moment-rotation parameters for composite shear tab connections", J. Struct. Eng., 130(9), 1371-1380. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:9(1371)
  182. Liu, W. (2019), "Shape coefficient study of the extended end-plate connections base on three parameters power model", IOP Conference Series: Earth and Environmental Science, 330(3), 032096. https://doi.org/10.1088/1755-1315/330/3/032096
  183. Liu, Y., Xu, L. and Grierson, D.E. (2008), "Compound-element modeling accounting for semi-rigid connections and member plasticity", Eng. Struct., 30(5), 1292-1307. https://doi.org/10.1016/j.engstruct.2007.07.026
  184. Loh, H.Y., Uy, B. and Bradford, M.A. (2006), "The effects of partial shear connection in composite flush end plate joints Part II-Analytical study and design appraisal", J. Construct. Steel Res., 62(4), 391-412. https://doi.org/10.1016/j.jcsr.2005.07.010
  185. Lopez, M., Loureiro, A., Gutierrez, R. and Reinosa, J.M. (2021), "A new analytical formulation for the stiffness and resistance of the additional plate in bending in beam-to-beam steel joints", Eng. Struct., 228, 111476. https://doi.org/10.1016/j.engstruct.2020.111476
  186. Lothers, J.E. (1951), "Elastic restraint equations for semi-rigid connections", Transactions American Soc. Civil Engineers, 116(1), 480-494. https://doi.org/10.1061/TACEAT.0006540
  187. Loureiro, A., Lopez, M. and Bayo, E. (2016), "Shear behaviour of stiffened double rectangular column panels: Characterization and cruciform element", J. Construct. Steel Res., 117, 126-138. https://doi.org/10.1016/j.jcsr.2015.10.012
  188. Loureiro, A., Lopez, M., Gutierrez, R. and Reinosa, J.M. (2013), "Experimental and numerical analysis of E-stubs in three dimensional joints: A new analytical formulation for the stiffness calculation", Eng. Struct., 53, 1-9. https://doi.org/10.1016/j.engstruct.2013.03.035
  189. Loureiro, A., Lopez, M., Gutierrez, R. and Reinosa, J.M. (2013), "A new analytical formulation for the E-stub strength calculation in three dimensional steel joints with additional plates welded to the weak axis", Eng. Struct., 56, 2263-2272. https://doi.org/10.1016/j.engstruct.2013.08.037
  190. Loureiro, A., Lopez, M., Gutierrez, R. and Reinosa, J.M. (2020), "Experimental evaluation, FEM and condensed stiffness matrices of 2D external welded haunched joints", Eng. Struct., 205, 110110. https://doi.org/10.1016/j.engstruct.2019.110110
  191. Loureiro, A., Moreno, A., Gutierrez, R. and Reinosa, J. M. (2012), "Experimental and numerical analysis of three-dimensional semi-rigid steel joints under non-proportional loading", Eng. Struct., 38, 68-77. https://doi.org/10.1016/j.engstruct.2011.12.048
  192. Lui, E. M. and Wai-Fah, C. (1988), "Behavior of braced and unbraced semi-rigid frames", J. Solids Struct., 24(9), 893-913. https://doi.org/10.1016/0020-7683(88)90040-6
  193. Ma, H.H., Ma, Y.Y., Yu, Z. W., Jiang, P., Fan, F. and Meng, Z.P. (2020), "Hysteretic behavior of bolt-column joints under inplane loading combinations by experimental and numerical study", Eng. Struct., 212, 110349. https://doi.org/10.1016/j.engstruct.2020.110349
  194. Ma, Y.Y., Ma, H.H., Ren, S. and Fan, F. (2020), "Hysteretic behavior of a new assemble joint under out-of-plane bending: Experimental and numerical studies", J. Construct. Steel Res., 167, 105959. https://doi.org/10.1016/j.jcsr.2020.105959
  195. Maggi, Y.I., Goncalves, R.M., Leon, R.T. and Ribeiro, L.F.L. (2005), "Parametric analysis of steel bolted end plate connections using finite element modeling", J. Construct. Steel Res., 61(5), 689-708. https://doi.org/10.1016/j.jcsr.2004.12.001
  196. Mahamid, M. and Al Hijaj, M. (2017), "Behavior of skewed extended shear tab connections part II: Connection to supporting flange", J. Construct. Steel Res., 128, 462-472. https://doi.org/10.1016/j.jcsr.2016.08.025
  197. Mak, L. and Elkady, A. (2021), "Experimental Database for Steel Flush End-Plate Connections", J. Struct. Eng., 147(7), 04721006. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003064
  198. Malaga-Chuquitaype, C. and Elghazouli, A.Y. (2010), "Component-based mechanical models for blind-bolted angle connections", Eng. Struct., 32(10), 3048-3067. https://doi.org/10.1016/j.engstruct.2010.05.024
  199. Maquoi, R. and Jaspart, J.P. (1991), "Influence of the non-linear modellings of beam-to-column joints on the structural response of braced and unbraced steel building frames", Fourth International Colloquium on Structural Stability Mediterranean Session, Istanbul, September.
  200. Mashaly, E., El-Heweity, M., Abou-Elfath, H. and Osman, M. (2011), "Finite element analysis of beam-to-column joints in steel frames under cyclic loading", Alexandria Eng. J., 50(1), 91-104. https://doi.org/10.1016/j.aej.2011.01.012
  201. Mathe, A.E., Popa, A.G. and Campian, C.M. (2011), "The influence of semi-rigid connections upon the performance of steel structures seismically excited", Acta Technica Napocensis: Civil Engineering and Architecture, 54(3), 268-279.
  202. Mofid, M., Asl, M.G. and McCabe, S.L. (2001), "On the analytical model of beam-to-column semi-rigid connections, using plate theory", Thin-walled Struct., 39(4), 307-325. https://doi.org/10.1016/S0263-8231(01)00002-7
  203. Mohamadi-Shooreh, M.R., Mofid, M. and McCabe, S.L. (2013), "Empirical model of the moment-rotation curve of beam-tobeam bolted flush endplate connections", J. Struct. Eng., 139(1), 66-72. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000597
  204. Mohamed, S.E. and Simitses, G.J. (1990), "Stability and collapse of semirigidly connected portal frames", J. Aerosp. Eng., 3(1), 46-63. https://doi.org/10.1061/(ASCE)0893-1321(1990)3:1(46)
  205. Mohammadi-Shoreh, M.R. (2004), "Basic issues in the analytical simulation of unstiffened extended end plate connection", Scientia Iranica, 11(4), Available from: https://www.sid.ir/en/journal/ViewPaper.aspx?id=36983
  206. Monforton, G.R. and Wu, T.S. (1963), "Matrix analysis of semirigidly connected frames", J. Struct. Division, 89(6), 13-42. https://doi.org/10.1061/JSDEAG.0000997
  207. Morris, G., Huang, J. and Scerbo, M. (1995), "Accounting for connection behavior in steel frame design", Canadian J. Civil Eng., 22(5), 955-969. https://doi.org/10.1139/l95-112
  208. Motallebi, M., Lignos, D.G. and Rogers, C.A. (2018), "Behaviour of stiffened extended shear tab connections under gravity induced shear force", J. Construct. Steel Res., 148, 336-350. https://doi.org/10.1016/j.jcsr.2018.06.011
  209. Mourad, S., Ghobarah, A. and Korol, R. M. (1995), "Dynamic response of hollow section frames with bolted moment connections", Eng. Struct., 17(10), 737-748. https://doi.org/10.1016/0141-0296(95)00002-O
  210. Nader, M.N. and Astaneh-Asl, A. (1996), "Shaking table tests of rigid, semirigid, and flexible steel frames", J. Struct. Eng., 122(6), 589-596. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:6(589)
  211. Nassani, D.E. (2014), "Behaviour of steel cap plate connections: Experimental tests", J. Steel Struct., 14(3), 649-657. https://doi.org/10.1007/s13296-014-3022-9
  212. Nawar, M.E., Elshafey, A., Kandil, K. and Eltaly, B. (2021), "Effect of biaxial bending moment on the behavior of steel extended end-plate connection", Eng. Struct., 239, 112348. https://doi.org/10.1016/j.engstruct.2021.112348
  213. Nethercot, D.A. (1985), Steel Beam to Column Connections-A Review of Tests Data, CIRIA, London, United Kingdom.
  214. Nethercot, D.A., Li, T.Q. and Ahmed, B. (1998), "Unified classification system for beam-to-column connections", J. Construct. Steel Res., 45(1), 39-65. https://doi.org/10.1016/S0143-974X(97)00064-3
  215. Nguyen, P. C. and Kim, S. E. (2014), "Nonlinear inelastic time-history analysis of three-dimensional semi-rigid steel frames", J. Construct. Steel Res., 101, 192-206. https://doi.org/10.1016/j.jcsr.2014.05.009
  216. Nguyen, P.C. and Kim, S.E. (2015), "Second-order spread-ofplasticity approach for nonlinear time-history analysis of space semi-rigid steel frames", Finite Elements Analysis Design, 105, 1-15. https://doi.org/10.1016/j.finel.2015.06.006
  217. Nogueiro, P., Silva, L.S.D., Bento, R. and Simoes, R. (2009), "Calibration of model parameters for the cyclic response of endplate beam-to-column steel-concrete composite joints", Steel Compos. Struct., 9, 39-58. https://doi.org/10.12989/scs.2009.9.1.039
  218. Obeydi, M., Daei, M. and Zeynalian, M. (2020), "A Generalized Analytical Method to Evaluate the Post-limit Properties of Joints in Bending Moment According to Eurocode3", J. Steel Struct., 20(5), 1465-1481. https://doi.org/10.1007/s13296-020-00380-y
  219. Omer, J.H., Kueh, A.B. and Shek, P.N. (2018), "Threedimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam-column with partially welded flush end-plate connection", Adv. Struct. Eng., 21(12), 1777-1791. https://doi.org/10.1177/1369433218754698
  220. Oosterhof, S.A. and Driver, R.G. (2016), "Shear connection modelling for column removal analysis", J. Construct. Steel Res., 117, 227-242. https://doi.org/10.1016/j.jcsr.2015.10.015
  221. Pan, J., Huang, R., Xu, J., Wang, P., Wang, Z. and Chen, J. (2021), "Behavior of exposed column-base connections with four internal anchor bolts under seismic loading", Structures, 34, 105-119. https://doi.org/10.1016/j.istruc.2021.07.016
  222. Piluso, V., Rizzano, G. and Tolone, I. (2012), "An advanced mechanical model for composite connections under hogging/sagging moments", J. Construct. Steel Res., 72, 35-50. https://doi.org/10.1016/j.jcsr.2011.10.001
  223. Pirmoz, A. and Danesh, F. (2009), "The seat angle role on moment-rotation response of bolted angle connections", Electronic J. Struct. Eng., 9, 73-79. https://doi.org/10.56748/ejse.9119
  224. Pirmoz, A. and Gholizadeh, S. (2007) "Predicting of momentrotation behavior of bolted connections using neural networks", 3rd National Congress on Civil Engineering, Tabriz, May.
  225. Pirmoz, A., Danesh, F. and Farajkhah, V. (2011), "The effect of axial beam force on moment-rotation curve of top and seat angels connections", Struct. Design Tall Special Build., 20(7), 767-783. https://doi.org/10.1002/tal.551
  226. Pirmoz, A., Khoei, A.S., Mohammadrezapour, E. and Daryan, A.S. (2009), "Moment-rotation behavior of bolted top-seat angle connections", J. Construct. Steel Res., 65(4), 973-984. https://doi.org/10.1016/j.jcsr.2008.08.011
  227. Poggi, C. (1988), "A finite element model for the analysis of flexibly connected steel frames", J. Numerical Methods Eng., 26(10), 2239-2254. https://doi.org/10.1002/nme.1620261008
  228. Popa, A.G. and Mathe, A.E. (2010), "Performance-based analysis of steel structures with semi-rigid connections", Proceedings of the 34th IABSE Symposiun "Large Structures and Infrastructures for Environmentally Constrained and Urbanized Areas", Venetia, September.
  229. Prabha, P., Rekha, S., Marimuthu, V., Saravanan, M., Palani, G.S. and Surendran, M. (2015), "Modified Frye-Morris polynomial model for double web-angle connections", J. Adv. Struct. Eng. (IJASE), 7(3), 295-306. https://doi.org/10.1007/s40091-015-0100-y
  230. Pucinotti, R. (2001), "Top-and-seat and web angle connections: prediction via mechanical model", J. Construct. Steel Res., 57(6), 663-696. https://doi.org/10.1016/S0143-974X(01)00007-4
  231. Pucinotti, R. (2007), "Prediction of cyclic moment-rotation behaviour for top and seat and web angle connections by mechanical model", Adv. Steel Construct., 3(2), 530-552. https://doi.org/10.18057/IJASC.2007.3.2.1
  232. Rao, D.P. and Kumar, S.S. (2006), "RHS beam-to-column connection with web opening-parametric study and design guidelines", J. Construct. Steel Res., 62(8), 747-756. https://doi.org/10.1016/j.jcsr.2005.11.015
  233. Razzaghi, J. and Khoshbakht, A. (2015), "Numerical evaluation of column base rigidity", J. Steel Struct., 15(1), 39-49. https://doi.org/10.1007/s13296-015-3003-7
  234. Razzaq, Z. (1983), "End restraint effect on steel column strength", J. Struct. Eng., 109(2), 314-334. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:2(314)
  235. Razzaq, Z. and Calash, A.Y. (1985), "Imperfect columns with biaxial partial restraints", J. Struct. Eng., 111(4), 758-776. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(758)
  236. Reinosa, J. M., Loureiro, A., Gutierrez, R. and Lopez, M. (2013), "Analytical frame approach for the axial stiffness prediction of preloaded T-stubs", J. Construct. Steel Res., 90, 156-163. https://doi.org/10.1016/j.jcsr.2013.07.030
  237. Reinosa, J.M., Loureiro, A., Gutierrez, R. and Lopez, M. (2015), "Analytical frame approach for the rotational stiffness prediction of beam-to-column angle connections", J. Construct. Steel Res., 106, 67-76. https://doi.org/10.1016/j.jcsr.2014.12.005
  238. Reinosa, J.M., Loureiro, A., Gutierrez, R. and Lopez, M. (2015), "Analytical plate approach for the axial stiffness prediction of stiffened angle cleats", J. Construct. Steel Res., 106, 77-88. https://doi.org/10.1016/j.jcsr.2014.12.010
  239. Reinosa, J.M., Loureiro, A., Gutierrez, R. and Lopez, M. (2020), "Mechanical stiffness prediction of beam-to-column stiffened angle joints", J. Construct. Steel Res., 168, 105875. https://doi.org/10.1016/j.jcsr.2019.105875
  240. Rex, C.O. and Goverdhan, P.A.V. (2000), "Design and behavior of a real PR building", Connections in Steel Structures IV; Behavior, Strength and Design, Roanoke, Virginia, October.
  241. Reyes-Salazar, A., Bojorquez, E., Haldar, A., Lopez-Barraza, A. and Rivera-Salas, J. L. (2014), "Seismic response of 3D steel buildings considering the effect of PR connections and gravity frames", The Scientific World J., 2014, 346156, 13. https://doi.org/10.1155/2014/346156
  242. Richard, R.M., Hsia, W.K. and Chmielowiec, M. (1988), "Derived moment rotation curves for double framing angles", Comput. Struct., 30(3), 485-494.https://doi.org/10.1016/0045-7949(88)90281-7
  243. Rizzano, G. (2006), "Seismic design of steel frames with partial strength joints", J. Earthq. Eng., 10(05), 725-747. https://doi.org/10.1080/13632460609350616
  244. Rodas, P.T., Zareian, F. and Kanvinde, A. (2017), "Rotational stiffness of deeply embedded column-base connections", J. Struct. Eng., 143(8), 04017064. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001789
  245. Salajegheh, E., Gholizadeh, S. and Pirmoz, A. (2008), "Selforganizing parallel back propagation neural networks for predicting the moment-rotation behavior of bolted connections", Asian J. Civil Eng., 9(6), 625-640.
  246. Saritas, A. and Koseoglu, A. (2015), "Distributed inelasticity planar frame element with localized semi-rigid connections for nonlinear analysis of steel structures", J. Mech. Sci., 96, 216-231. https://doi.org/10.1016/j.ijmecsci.2015.04.005
  247. Seco, L.D.S., Couchaux, M., Hjiaj, M. and Neves, L.C. (2021), "Column base-plates under biaxial bending moment", Eng. Struct., 231, 111386. https://doi.org/10.1016/j.engstruct.2020.111386
  248. Shen, J. and Astaneh-Asl, A. (2000), "Hysteresis model of boltedangle connections", J. Construct. Steel Res., 54(3), 317-343. https://doi.org/10.1016/S0143-974X(99)00070-X
  249. Sherbourne, A.N. and Bahaari, M.R. (1994), "3D simulation of end-plate bolted connections", J. Struct. Eng., 120(11), 3122- 3136. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:11(3122)
  250. Shi, G., Shi, Y. and Wang, Y. (2007), "Behaviour of end-plate moment connections under earthquake loading", Eng. Struct., 29(5), 703-716. https://doi.org/10.1016/j.engstruct.2006.06.016
  251. Shi, G., Shi, Y., Wang, Y. and Bradford, M.A. (2008), "Numerical simulation of steel pretensioned bolted end-plate connections of different types and details", Eng. Struct., 30(10), 2677-2686. https://doi.org/10.1016/j.engstruct.2008.02.013
  252. Shi, Y.J., Chan, S.L. and Wong, Y.L. (1996), "Modeling for moment-rotation characteristics for end-plate connections", J. Struct. Eng., 122(11), 1300-1306. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:11(1300)
  253. Shi, Y., Shi, G. and Wang, Y. (2007), "Experimental and theoretical analysis of the moment-rotation behaviour of stiffened extended end-plate connections", J. Construct. Steel Res., 63(9), 1279-1293. https://doi.org/10.1016/j.jcsr.2006.11.008
  254. Shi, Z. and Fan, J. (2018), "Analytical investigation on effective elastic stiffness of eccentric steel beam-column joints", Adv. Struct. Eng., 21(1), 125-137. https://doi.org/10.1177/1369433217711619
  255. Simoes da Silva, L., Jordao, S. and Simoes, R. (2012), "A component model for welded beam-to-column joints with beams of unequal depth", Stahlbau, 81(4), 290-303. https://doi.org/10.1002/stab.201201544
  256. Singh, R. and Lui, E.M. (2014), "Design of PR frames with top and seat angle connections using the direct analysis method", Adv. Steel Construct., 10(2), 116-138. https://doi.org/10.18057/IJASC.2014.10.2.1
  257. Sivakumaran, K.S. (1988), "Seismic response of multi-storey steel buildings with flexible connections", Eng. Struct., 10(4), 239-248. https://doi.org/10.1016/0141-0296(88)90045-4
  258. Skejic, D., Dujmovic, D. and Beg, D. (2014), "Behaviour of stiffened flange cleat joints", J. Construct. Steel Res., 103, 61-76. https://doi.org/10.1016/j.jcsr.2014.07.011
  259. Smitha, M.S. and Kumar, S.S. (2013), "Steel-concrete composite flange plate connections-finite element modeling and parametric studies", J. Construct. Steel Res., 82, 164-176. https://doi.org/10.1016/j.jcsr.2013.01.002
  260. Soares, H.B., Paccola, R.R. and Coda, H.B. (2021), "A Box element to model semi-rigid connections in shell-based Thinwalled Struct. analysis", Eng. Struct., 246, 113075. https://doi.org/10.1016/j.engstruct.2021.113075
  261. Soleimani, E. and Behnamfar, F. (2017), "New moment-rotation equation for welded steel beam-to-column connections", J. Steel Struct., 17(2), 389-411. https://doi.org/10.1007/s13296-017-6003-y
  262. Sommer W.H. (1969), "Behaviour of welded header plate connections", M.Sc. Dissertation, University of Toronto, Ontario.
  263. Springfield, J. (1987), "Semi-rigid connections structural steel framing: A practising engineer's view", J. Construct. Steel Res., 8, 1-13. https://doi.org/10.1016/0143-974X(87)90051-4
  264. Stamatopoulos, G.N. (2012), "Contribution of the flexible supports to the distribution of the internal forces in steel frames", J. Steel Struct., 12(3), 419-426. https://doi.org/10.1007/s13296-012-3010-x
  265. Stamatopoulos, G.N. (2015), "Influence of the flexible supports on the buckling loads of steel frames", J. Steel Struct., 15(3), 661-670. https://doi.org/10.1007/s13296-015-9012-8
  266. Stamatopoulos, G.N. and Ermopoulos, J.C. (2011), "Experimental and analytical investigation of steel column bases", J. Construct. Steel Res., 67(9), 1341-1357. https://doi.org/10.1016/j.jcsr.2011.03.007
  267. Stavroulakis, G.E., Avdelas, A.V., Abdalla, K.M. and Panagiotopoulos, P. D. (1997), "A neural network approach to the modelling, calculation and identification of semi-rigid connections in steel structures", J. Construct. Steel Res., 44(1-2), 91-105. https://doi.org/10.1016/S0143-974X(97)00039-4
  268. Stoakes, C.D. and Fahnestock, L.A. (2012), "Cyclic flexural analysis and behavior of beam-column connections with gusset plates", J. Construct. Steel Res., 72, 227-239. https://doi.org/10.1016/j.jcsr.2011.12.008
  269. Suleiman, M.F., Shahrooz, B.M., Bill, H.L., Fortney, P.J. and Thornton, W.A. (2017), "3-d finite element modeling of extended single plate shear connections: Predicting the mode of failure", J. Steel Struct., 17(2), 525-534. https://doi.org/10.1007/s13296-017-6012-x
  270. Sumner, E.A., Mays, T.W. and Murray, T.M. (2000, October), "End-plate moment connections: test results and finite element method validation", 4th International Workshop on Connections in Steel Structures, Roanoke, June.
  271. Tagawa, H. and Gurel, S. (2005), "Application of steel channels as stiffeners in bolted moment connections", J. Construct. Steel Res., 61(12), 1650-1671. https://doi.org/10.1016/j.jcsr.2005.04.004
  272. Tahir, M.M., Juki, I., Yong, L.H., Mohammad, S. and Ngian, S.P. (2011), "Finite element analysis of flush end-plate connections connected to column web", J. Steel Struct., 11(3), 247-258. https://doi.org/10.1007/s13296-011-3001-3
  273. Tahir, M.M., Mohammadhosseini, H., Ngian, S.P. and Effendi, M. K. (2018), "I-beam to square hollow column blind bolted moment connection: Experimental and numerical study", J. Construct. Steel Res., 148, 383-398. https://doi.org/10.1016/j.jcsr.2018.06.012
  274. Targowski, R., Lamblin, D. and Guerlement, G. (1993), "Baseplate column connection under bending: experimental and numerical study", J. Construct. Steel Res., 27(1-3), 37-54. https://doi.org/10.1016/0143-974X(93)90005-D
  275. Thambiratnam, D.P. and Krishnamurthy, N. (1989), "Computer analysis of column base plates", Comput. Struct., 33(3), 839-850. https://doi.org/10.1016/0045-7949(89)90258-7
  276. Thomas, K., Driver, R.G., Oosterhof, S.A. and Callele, L. (2017), "Full-scale tests of stabilized and unstabilized extended singleplate connections", Structures, 10, 49-58. https://doi.org/10.1016/j.istruc.2016.12.005
  277. Urbonas, K. and Daniunas, A. (2003), "Numerical tests of steel beam-to-column semi-rigid connections", J. Civil Eng. Management, 9(4), 292-296. https://doi.org/10.1080/13923730.2003.10531342
  278. Urbonas, K. and Daniunas, A. (2006), "Behaviour of semi-rigid steel beam-to-beam joints under bending and axial forces", J. Construct. Steel Res., 62(12), 1244-1249. https://doi.org/10.1016/j.jcsr.2006.04.024
  279. Vellasco, P.D.S., De Andrade, S., Da Silva, J.G. S., De Lima, L.R. O. and Brito Jr, O. (2006), "A parametric analysis of steel and composite portal frames with semi-rigid connections", Eng. Struct., 28(4), 543-556. https://doi.org/10.1016/j.engstruct.2005.09.010
  280. Wales, M.W. and Rossow, E.C. (1983), "Coupled moment-axial force behavior in bolted joints", J. Struct. Eng., 109(5), 1250-1266. https://doi.org/10.1061/(ASCE)0733- 9445(1983)109:5(1250)
  281. Wang, J., Zhu, H., Uy, B., Patel, V., Aslani, F. and Li, D. (2018), "Moment-rotation relationship of hollow-section beam-tocolumn steel joints with extended end-plates", Steel Compos. Struct., Int. J, 29(6), 717-734. https://doi.org/10.12989/scs.2018.29.6.717
  282. Wang, M., Shi, Y., Wang, Y. and Shi, G. (2013), "Numerical study on seismic behaviors of steel frame end-plate connections", J. Construct. Steel Res., 90, 140-152. https://doi.org/10.1016/j.jcsr.2013.07.033
  283. Weigand, J.M. (2017), "Component-based model for single-plate shear connections with pretension and pinched hysteresis", J. Struct. Eng., 143(2), 04016178. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001662
  284. Wheeler, A.T., Clarke, M.J. and Hancock, G.J. (2000), "FE modeling of four-bolt, tubular moment end-plate connections", J. Struct. Eng., 126(7), 816-822. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:7(816)
  285. Wu, F. H. and Chen, W. F. (1990), "A design model for semi-rigid connections", Eng. Struct., 12(2), 88-97. https://doi.org/10.1016/0141-0296(90)90013-I
  286. Wu, Z., Zhang, S. and Jiang, S.F. (2012), "Simulation of tensile bolts in finite element modeling of semi-rigid beam-to-column connections", J. Steel Struct., 12(3), 339-350. https://doi.org/10.1007/s13296-012-3004-8
  287. Wuwer, W., Zamorowski, J. and Swierczyna, S. (2012), "Lap joints stiffness according to Eurocode EC3 and experimental investigations results", Arch. Civil Mech. Eng., 12(1), 95-104. https://doi.org/10.1016/j.acme.2012.03.017
  288. Xu, G. and Ellingwood, B.R. (2011), "Disproportionate collapse performance of partially restrained steel frames with bolted Tstub connections", Eng. Struct., 33(1), 32-43. https://doi.org/10.1016/j.engstruct.2010.09.015
  289. Xu, L. and Grierson, D.E. (1993), "Computer-automated design of semirigid steel frameworks", J. Struct. Eng., 119(6), 1740-1760. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:6(1740)
  290. Xu, Y., Lu, L. and Zheng, H. (2019), "Finite element analysis of weak-axis composite connections under cyclic loading", J. Steel Struct., 19(1), 82-95. https://doi.org/10.1007/s13296-018-0091-1
  291. Yan, S. and Rasmussen, K.J. (2021), "Generalised Component Method-based finite element analysis of steel frames", J. Construct. Steel Res., 187, 106949. https://doi.org/10.1016/j.jcsr.2021.106949
  292. Yan, S., Jiang, L. and Rasmussen, K.J. (2020), "Full-range behaviour of double web angle connections", J. Construct. Steel Res., 166, 105907. https://doi.org/10.1016/j.jcsr.2019.105907
  293. Yang, J.G., Kim, H.K., Park, J.H. and Back, M.C. (2013), "Analytical models for the initial axial tensile stiffness and ultimate tensile load of a T-stub, including the effects of prying action", J. Steel Struct., 13(2), 341-352. https://doi.org/10.1007/s13296-013-2012-7
  294. Yang, J.G., Lee, S. K., Moon, J.K. and Baek, M.C. (2014), "Prediction models for the initial rotational stiffness and ultimate plastic moment for a double split tee connection", J. Steel Struct., 14(2), 213-222. https://doi.org/10.1007/s13296-014-2002-4
  295. Yang, J.G., Murray, T.M. and Plaut, R.H. (2000), "Threedimensional finite element analysis of double angle connections under tension and shear", J. Construct. Steel Res., 54(2), 227-244. https://doi.org/10.1016/S0143-974X(99)00048-6
  296. Yang, P. and Eatherton, M.R. (2014), "A phenomenological component-based model to simulate seismic behavior of bolted extended end-plate connections", Eng. Struct., 75, 11-26. https://doi.org/10.1016/j.engstruct.2014.05.023
  297. Yau, C.Y. and Chan, S.L. (1994), "Inelastic and stability analysis of flexibly connected steel frames by springs-in-series model", J. Struct. Eng., 120(10), 2803-2819. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:10(2803)
  298. Yee, Y.L. and Melchers, R.E. (1986), "Moment-rotation curves for bolted connections", J. Struct. Eng., 112(3), 615-635.https://doi.org/10.1061/(ASCE)0733 9445(1986)112:3(615)
  299. Yorgun, C., Dalci, S. and Altay, G.A. (2004), "Finite element modeling of bolted steel connections designed by double channel", Comput. Struct., 82(29-30), 2563-2571. https://doi.org/10.1016/j.compstruc.2004.04.003
  300. Youssef-Agha, W., Aktan, H.M. and Olowokere, O.D. (1989), "Seismic response of low-rise steel frames", J. Struct. Eng., 115(3), 594-607. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:3(594)
  301. Yu, C.H. and Shanmugam, N.E. (1986), "Stability of frames with semirigid joints", Comput. Struct., 23(5), 639-648. https://doi.org/10.1016/0045-7949(86)90071-4
  302. Yu, C.H. and Shanmugam, N.E. (1988), "Stability of semi-rigid space frames", Comput. Struct., 28(1), 85-91. https://doi.org/10.1016/0045-7949(88)90095-8
  303. Yun, G.J., Ghaboussi, J. and Elnashai, A.S. (2006), "Self-learning simulation for modeling of beam-column connections in steel frames", Proceeding of the 4th International Conference on Earthquake Engineering, Taipei, October.
  304. Yun, G.J., Ghaboussi, J. and Elnashai, A.S. (2007), "Development of neural network based hysteretic models for steel beamcolumn connections through self-learning simulation", J. Earthq. Eng., 11(3), 453-467. https://doi.org/10.1080/13632460601123180
  305. Zapico-Valle, J.L., Abad-Blasco, J., Gonzalez-Martinez, M.P., Franco-Gimeno, J. M. and Garcia-Dieguez, M. (2012), "Modelling and calibration of a beam-column joint based on modal data", Comput. Struct., 108, 31-41. https://doi.org/10.1016/j.compstruc.2012.02.016
  306. Zhao, B., Sun, C. and Li,H. (2020), "Study on the momentrotation behavior of eccentric rectangular hollow section crosstype connections under out-of-plane bending moment and chord stress", Eng. Struct., 207, 110211. https://doi.org/10.1016/j.engstruct.2020.110211
  307. Zhao, B., Sun, C., Cai, Y. and Liu, C. (2020), "An out-of-plane bending hysteretic model for multi-planar CHS X-connections", Structures, 23, 335-350. https://doi.org/10.1016/j.istruc.2019.10.003
  308. Zhu, C., Rasmussen, K.J. and Yan, S. (2019), "Generalised component model for structural steel joints", J. Construct. Steel Res., 153, 330-342. https://doi.org/10.1016/j.jcsr.2018.10.026