Nuclear Engineering and Technology

  • 제54권10호
  • /
  • Pages.3745-3765
  • /
  • 2022
  • /
  • 1738-5733(pISSN)
  • /
  • 2234-358X(eISSN)
한국원자력학회 (Korean Nuclear Society)
권호 표지
DOI QR코드

DOI QR Code

Impact-resistant design of RC slabs in nuclear power plant buildings

  • Li, Z.C. (State Key Laboratory of Nuclear Power Safety Monitoring Technology and Equipment, China Nuclear Power Engineering Co., Ltd) ;
  • Jia, P.C. (College of Civil Engineering, Tongji University) ;
  • Jia, J.Y. (State Key Laboratory of Nuclear Power Safety Monitoring Technology and Equipment, China Nuclear Power Engineering Co., Ltd) ;
  • Wu, H. (College of Civil Engineering, Tongji University) ;
  • Ma, L.L. (College of Civil Engineering, Tongji University)
  • 투고 : 2022.03.12
  • 심사 : 2022.05.25
  • 발행 : 2022.10.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The concrete structures related to nuclear safety are threatened by accidental impact loadings, mainly including the low-velocity drop-weight impact (e.g., spent fuel cask and assembly, etc. with the velocity less than 20 m/s) and high-speed projectile impact (e.g., steel pipe, valve, turbine bucket, etc. with the velocity higher than 20 m/s), while the existing studies are still limited in the impact resistant design of nuclear power plant (NPP), especially the primary RC slab. This paper aims to propose the numerical simulation and theoretical approaches to assist the impact-resistant design of RC slab in NPP. Firstly, the continuous surface cap (CSC) model parameters for concrete with the compressive strength of 20-70 MPa are fully calibrated and verified, and the refined numerical simulation approach is proposed. Secondly, the two-degree freedom (TDOF) model with considering the mutual effect of flexural and shear resistance of RC slab are developed. Furthermore, based on the low-velocity drop hammer tests and high-speed soft/hard projectile impact tests on RC slabs, the adopted numerical simulation and TDOF model approaches are fully validated by the flexural and punching shear damage, deflection, and impact force time-histories of RC slabs. Finally, as for the two low-velocity impact scenarios, the design procedure of RC slab based on TDOF model is validated and recommended. Meanwhile, as for the four actual high-speed impact scenarios, the impact-resistant design specification in Chinese code NB/T 20012-2019 is evaluated, the over conservation of which is found, and the proposed numerical approach is recommended. The present work could beneficially guide the impact-resistant design and safety assessment of NPPs against the accidental impact loadings.

키워드

과제정보

We gratefully acknowledge the financial support of the National Natural Science Foundation of China (51878507).

참고문헌

  1. Nuclear reactor accidents-history and legacies, https://www.atomicheritage.org/history.
  2. IAEA, Safety Reports Series No. 87, Safety Aspects of Nuclear Power Plants in Human Induced External Events, Assessment of structures, 2018.
  3. ACI Committee 349, ACI 349-13, Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-13) and Commentary, 2014.
  4. National Energy Administration, NB/T 20012-2019, Design Code for Nuclear Safety Related Concrete Structures for Pressure Water Reactor Nuclear Power Plants, 2019.
  5. Telford Arr. R3 Impact Assessment Procedure, Release vol. 4. Magnox report.
  6. T. Zhang, H. Wu, Q. Fang, T. Huang, Numerical simulations of nuclear power plant containment subjected to aircraft impact, Nucl. Eng. Des. 320 (2017) 207-221. https://doi.org/10.1016/j.nucengdes.2017.05.029
  7. Y.G. Qu, H. Wu, Z.Y. Xu, X. Liu, Z.F. Dong, Q. Fang, Safety assessment of Generation III nuclear power plant buildings subjected to commercial aircraft crash Part II: structural damage and vibrations, Nucl. Eng. Technol. 52 (2) (2020) 397-416. https://doi.org/10.1016/j.net.2019.07.015
  8. Z.R. Li, Z.C. Li, Z.F. Dong, T. Huang, Y.G. Lu, J.L. Rong, H. Wu, Damage and vibrations of nuclear power plant buildings subjected to aircraft crash part I: model test, Nucl. Eng. Technol. 53 (9) (2021) 3068-3084. https://doi.org/10.1016/j.net.2021.03.009
  9. Z.R. Li, Z.C. Li, Z.F. Dong, T. Huang, Y.G. Lu, J.L. Rong, H. Wu, Damage and vibrations of nuclear power plant buildings subjected to aircraft crash part II: numerical simulations, Nucl. Eng. Technol. 53 (9) (2021) 3085-3099. https://doi.org/10.1016/j.net.2021.03.008
  10. I. Kojima, An experimental study on local behavior of reinforced concrete slabs to missile impact, Nucl. Eng. Des. 130 (2) (1991) 121-132. https://doi.org/10.1016/0029-5493(91)90121-W
  11. A. Vepsa, A. Saarenheimo, F. Tarallo, J.M. Rammbach, N. Orbovic, IRIS 2010 Part II: experimental data, in: Transaction of 21st International Conference on Structural Mechanics in Reactor Technology, 2011. New Delhi, India.
  12. N. Orbovic, F. Benboudjema, Y. Berthaud, J.B. Colliat, J.M. Rammbach, IRIS 2010 Part III: Numerical Simulations of Meppen II-4 Test and Vtt-Irsn-Cnsc Punching Tests, SMIRT21, 2011.
  13. A. Vepsa, K. Calonius, A. Saarenheimo, S. Aatola, M. Halonen, Soft impact testing of a wall-floor-wall reinforced concrete structure, Nucl. Eng. Des. 311 (2017) 86-103. https://doi.org/10.1016/j.nucengdes.2016.10.052
  14. T. Zhang, H. Wu, T. Huang, J.H. Sheng, Q. Fang, F.J. Zhang, Penetration depth of RC panels subjected to the impact of aircraft engine missiles, Nucl. Eng. Des. 335 (2018) 44-53. https://doi.org/10.1016/j.nucengdes.2018.04.025
  15. A. Haldar, H. Hamieh, Local effect of solid missiles on concrete structures, J. Struct. Div. ASCE 110 (5) (1984) 948-960. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:5(948)
  16. F. Wang, J.B. Liu, X. Bao, S.T. Li, Z.Y. An, Experimental study of the resistance of RC walls with different transverse reinforcements subjected to large-scale rigid projectile impacts, Eng. Struct. 251 (2022), 113558. https://doi.org/10.1016/j.engstruct.2021.113558
  17. Q.M. Li, S.R. Reid, H.M. Wen, A.R. Telford, Local impact effects of hard missiles on concrete targets, Int. J. Impact Eng. 32 (1e4) (2005) 224-284. https://doi.org/10.1016/j.ijimpeng.2005.04.005
  18. Z.C. Li, Y.H. Yang, Z.F. Dong, T. Huang, H. Wu, Safety assessment of nuclear fuel reprocessing plant under the free drop impact of spent fuel cask and fuel assembly part I: large-scale model test and finite element model validation, Nucl. Eng. Technol. 53 (8) (2021) 2682-2695. https://doi.org/10.1016/j.net.2021.02.004
  19. Y.H. Yang, W.Y. Dai, T. Huang, H. Wu, Numerical simulations of nuclear fuel reprocessing plant subjected to the free drop impact of spent fuel cask and fuel assembly, Nucl. Eng. Des. 385 (2021), 111524. https://doi.org/10.1016/j.nucengdes.2021.111524
  20. M. Zineddin, T. Krauthammer, Dynamic response and behavior of reinforced concrete slabs under impact loading, Int. J. Impact Eng. 34 (9) (2007) 1517-1534. https://doi.org/10.1016/j.ijimpeng.2006.10.012
  21. H. Othman, H. Marzouk, An experimental investigation on the effect of steel reinforcement on impact response of reinforced concrete plates, Int. J. Impact Eng. 88 (2016) 12-21. https://doi.org/10.1016/j.ijimpeng.2015.08.015
  22. Y. Xiao, B. Li, K. Fujikake, Experimental study of reinforced concrete slabs under different loading rates, ACI Struct. J. 113 (1) (2016) 157-168.
  23. Y. Xiao, B. Li, K. Fujikake, Predicting response of reinforced concrete slabs under low-velocity impact, Mag. Concr. Res. 69 (19) (2017) 996-1010. https://doi.org/10.1680/jmacr.16.00450
  24. K. Fujikake, B. Li, S. Soeun, Impact response of reinforced concrete beam and its analytical evaluation, J. Struct. Eng. 135 (8) (2009) 938-950. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000039
  25. W. Yi, D. Zhao, S.K. Kunnath, Simplified approach for assessing shear resistance of reinforced concrete beams under impact loads, ACI Struct. J. 113 (4) (2016) 747-756.
  26. D. Zhao, W. Yi, S.K. Kunnath, Numerical simulation and shear resistance of reinforced concrete beams under impact, Eng. Struct. 166 (2018) 387-401. https://doi.org/10.1016/j.engstruct.2018.03.072
  27. LSTC, LS-DYNA Keywords User's Manual Version R11 Volume II, Livermore Software Technology Corporation, California, 2007, pp. 747-756.
  28. D. Saini, B. Shafei, Concrete constitutive models for low velocity impact simulations, Int. J. Impact Eng. 132 (2019), 103329. https://doi.org/10.1016/j.ijimpeng.2019.103329
  29. M. Zhao, D.E. Lehman, C.W. Roeder, Modeling recommendations for RC and CFST sections in ls-dyna including bond slip, Eng. Struct. 229 (2021), 111612. https://doi.org/10.1016/j.engstruct.2020.111612
  30. Y.D. Murray, Users Manual for Ls-Dyna Concrete Material Model 159: No. FHWAHRT-05-062, Colorado Springs, Federal Highway Administration, 2007.
  31. D.C. Stouffer, L.T. Dame, Inelastic Deformation of Metals: Models, Mechanical Properties, and Metallurgy, John Wiley and Sons, New York, 1996.
  32. J.C. Lim, T. Ozbakkaloglu, Stress-strain model for normal- and light-weight concretes under uniaxial and triaxial compression, Construct. Build. Mater. 71 (2014) 492-509. https://doi.org/10.1016/j.conbuildmat.2014.08.050
  33. H. Jiang, J. Zhao, Calibration of the continuous surface cap model for concrete, Finite Elem. Anal. Des. 97 (2015) 1-19. https://doi.org/10.1016/j.finel.2014.12.002
  34. Y.D. Murray, A.Y. Abu-odeh, R.P. Bligh, Evaluation of Ls-Dyna Concrete Material Model 159: No. FHWA-HRT-05-063, Colorado Springs, Federal Highway Administration, 2007.
  35. CEB-FIP Model Code 1990, Comite Euro-International du Beton, Thomas Telford House, 1993.
  36. GB 50010-2010, Code for Design of Concrete Structures, Standards Press of China, Beijing, 2010.
  37. P.C. Jia, H. Wu, R. Wang, Q. Fang, Dynamic responses of reinforced ultra-high performance concrete members under low-velocity lateral impact, Int. J. Impact Eng. 150 (2021), 103818. https://doi.org/10.1016/j.ijimpeng.2021.103818
  38. Gb T 1499.2 2018, Steel for the Reinforcement of Concrete-Part 2: Hot Rolled Ribbed Bars, Standards Press of China, Beijing, 2018.
  39. Gb T 1499.1 2017, Steel for the Reinforcement of Concrete-Part 1: Hot Rolled Plain Bars, Standards Press of China, Beijing, 2017.
  40. M.M. Attard, S. Setunge, Stress-strain relationship of confined and unconfined concrete, ACI Mater. J. 93 (5) (1996) 432-442.
  41. S. Hu, R. Zhang, B. Fan, Y. Xu, Experimental study on fracture property of three-point bending concrete beam based on DIC method, Yangtze River 50 (10) (2019) 197-202 (in Chinese).
  42. A. Muttoni, Punching shear strength of reinforced concrete slabs without transverse reinforcement, ACI Struct. J. 105 (2) (2008) 440-450.
  43. M.F. Ruiz, A. Muttoni, Applications of critical shear crack theory to punching of reinforced concrete slabs with transverse reinforcement, ACI Struct. J. 106 (4) (2009) 485-494.
  44. H. Li, W. Chen, T.M. Pham, H. Hao, Analytical and numerical studies on impact force profile of RC beam under drop weight impact, Int. J. Impact Eng. 147 (2021), 103743. https://doi.org/10.1016/j.ijimpeng.2020.103743
  45. S.A. Anagnostopoulos, Pounding of buildings in series during earthquakes, Earthq. Eng. Struct. Dynam. 16 (3) (1988) 443-456. https://doi.org/10.1002/eqe.4290160311
  46. S. Yoo, T. Yuan, S. Hong, Y. Yoon, Effect of strengthening methods on two-way slab under low-velocity impact loading, Materials 13 (24) (2020) 5603. https://doi.org/10.3390/ma13245603
  47. N. Jones, Structural Impact, Cambridge University Press, 1997.
  48. A. Vepsa, A. Saarenheimo, F. Tarallo, J. Rambach, N. Orbovic, Impact tests for IRIS_2010 benchmark exercise, J. Disaster Res. 7 (5) (2012) 619-628. https://doi.org/10.20965/jdr.2012.p0619