Acknowledgement
이 논문은 산업통상자원부 월드클래스플러스프로젝트 지원사업 (과제번호: P0020676)으로 수행되었습니다.
References
- A. Siewiorek, A. Kudyba, N. Sobczak, M. Homa, Z. Huber, Z. Adamek, and J. Wojewoda-Budka, "Effects of PCB Substrate Surface Finish and Flux on Solderability of Lead-Free SAC305 Alloy", J. Mater. Eng. Perform., 22(8), 2247 (2013). https://doi.org/10.1007/s11665-013-0492-4
- M. Ratzker, A. Pearl, M. Osterman, M. Pecht, and G. Milad, "Review of Capabilities of the ENEPIG Surface Finish", J. Electron. Mater., 43(11), 3885 (2014). https://doi.org/10.1007/s11664-014-3322-z
- K. H. Kim, J. Koike, J. W. Yoon, and S. Yoo, "Effect of Plasma Surface Finish on Wettability and Mechanical Properties of SAC305 Solder Joints", J. Electron. Mater., 45(12), 6184 (2016). https://doi.org/10.1007/s11664-016-4908-4
- X. Luhua and J. H. L. Pang, "Intermetallic Growth Studies on SAC/ENIG and SAC/CU-OSP Lead-Free Solder Joints", Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems (ITHERM), IEEE, (2006).
- W. Seo, K. H. Kim, Y. H. Kim, and S. Yoo, "Effect of NiP Plating Temperature on Growth of Interfacial Intermetallic Compound in Electroless Nickel Immersion Gold/Sn-Ag-Cu Solder Joints", J. Electron. Mater., 47(1), 110 (2018). https://doi.org/10.1007/s11664-017-5821-1
- W. Seo, K. H. Kim, J. H. Bang, M. S. Kim, and S. Yoo, "Effect of Bath Life of Ni(P) on the Brittle-Fracture Behavior of Sn-3.0Ag-0.5Cu/ENIG", J. Electron. Mater., 43(12), 4457 (2014). https://doi.org/10.1007/s11664-014-3395-8
- P. Snugovsky, P. Arrowsmith, and M. Romansky, "Electroless Ni/Immersion Au Interconnects: Investigation of Black Pad in Wire Bonds and Solder Joints", J. Electron. Mater., 30(9), 1262 (2001). https://doi.org/10.1007/s11664-001-0159-z
- K. H. Kim, J. Yu, and J. H. Kim, "A Corrosion Couple Experiment Reproducing the Black Pad Phenomenon Found after the Electroless Nickel Immersion Gold Process", Scr. Mater., 63(5), 508 (2010). https://doi.org/10.1016/j.scriptamat.2010.05.015
- K. Zeng, R. Stierman, D. Abbott, and M. Murtuza, "Root Cause of Black Pad Failure of Solder Joints with Electroless Nickel/Immersion Gold Plating", Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems (ITHERM), IEEE, (2006).
- J. -H. Back, S. Yoo, D. -G. Han, S. -B. Jung, and J. -W. Yoon, "Interfacial Reactions and Mechanical Strength of Sn-3.0Ag0.5Cu/0.1§--Ni Thin ENEPIG Solder Joint", J. Weld. Join., 35(6), 51 (2017).
- P. Chi, Y. Li, H. Pan, Y. Wang, N. Chen, M. Li, and L. Gao, "Effect of Ni(P) Layer Thickness on Interface Reaction and Reliability of Ultrathin Enepig Surface Finish", Materials, 14(24), 7874 (2021). https://doi.org/10.3390/ma14247874
- C. Shen, Z. Hai, C. Zhao, J. Zhang, J. L. Evans, M. J. Bozack, and J. C. Suhling, "Packaging Reliability Effect of ENIG and ENEPIG Surface Finishes in Board Level Thermal Test under Long-Term Aging and Cycling", Materials, 10(5), 451 (2017). https://doi.org/10.3390/ma10050451
- B. K. Kim, S. J. Kim, J. Y. Kim, K. Y. Ji, Y. J. Yoon, M. Y. Kim, S. H. Park, and J. S. Yoo, "Origin of Surface Defects in PCB Final Finishes by the Electroless Nickel Immersion Gold Process", J. Electron. Mater., 37(4), 527 (2008). https://doi.org/10.1007/s11664-007-0360-9
- F. Song, S. W. R. Lee, K. Newman, B. Sykes, and S. Clark, "High-Speed Solder Ball Shear and Pull Tests vs . Board Level Mechanical Drop Tests : Correlation of Failure Mode and Loading Speed", In 2007 Proceedings 57th Electronic Components and Technology Conference, IEEE, (2007).
- JEDEC Solid State Technology Association. JESD22-B117A: solder ball shear; 2003.
- JEDEC Solid State Technology Association. JESD22-B111: board level drop test method of component for handheld electronics products; 2003.
- W. Seo, T. -I. Lee, Y. -H. Kim, and S. Yoo, "Brittle Fracture Behavior of ENIG/Sn-Ag-Cu Solder Joint with pH of Ni-P Electroless Plating Solution", J. Microelectron. Packag. Soc., 27(3) 29 (2020).
- H. Lee, J. Jung, C. Heo, C. Kim, J. H. Lee, and Y. Kim, "Characterization of the Contamination Factor of Electroless Ni Plating Solutions on the ENIG Process", J. Electron. Mater., 47(9) 5158 (2018). https://doi.org/10.1007/s11664-018-6335-1
- P. E. Tegehall, "Review of the Impact of Intermetallic Layers on the Risk for Brittle Fractures in Solder Joints", In Proceedings of the IMAPS Nordic Annual Conference, Oulu, (2006).
- K. Newman, "BGA Brittle Fracture-Alternative Solder Joint Integrity Test Methods", Proceedings Electronic Components and Technology, ECTC'05, IEEE, (2005).
- K. Kim, W. Seo, S. Kwon, J. Kim, J. Yoon, and S. Yoo, "Effects of Ni-P Bath on the Brittle Fracture of Sn-Ag-Cu Solder/ENEPIG Solder Joint", J. Weld. Join., 35(3), 1 (2017).
- H. Matsuki, H. Ibuka, and H. Saka, "TEM Observation of Interfaces in a Solder Joint in a Semiconductor Device", Sci. Technol. Adv. Mater., 3(3), 261 (2002). https://doi.org/10.1016/S1468-6996(02)00025-6
- T. Laurila, V. Vuorinen, and J. K. Kivilahti, "Interfacial Reactions between Lead-Free Solders and Common Base Materials", Mater. Sci. Eng.: R: Reports, 49(1-2), 1 (2005). https://doi.org/10.1016/j.mser.2005.03.001
- I. Shohji, T. Yoshida, T. Takahashi, and S. Hioki, "Tensile Properties of Sn-Ag Based Lead-Free Solders and Strain Rate Sensitivity", Mater. Sci. Eng.: A, 366(1), 50 (2004). https://doi.org/10.1016/j.msea.2003.09.057
- G. Xiao, G. Yuan, C. Jia, X. Yang, Z. Li, and X. Shu, "Strain Rate Sensitivity of Sn-3.0Ag-0.5Cu Solder Investigated by Nanoindentation", Mater. Sci. Eng.: A, 613, 336 (2014). https://doi.org/10.1016/j.msea.2014.06.113
- S. Liu, S. McDonald, K. Sweatman, and K. Nogita, "The Effects of Precipitation Strengthening and Solid Solution Strengthening on Strain Rate Sensitivity of Lead-Free Solders", Microelectron. Reliab, 84, 170 (2018). https://doi.org/10.1016/j.microrel.2018.03.038
- W. Seo, K. H. Kim, Y. H, Ko, Y. H., Kim, and S. Yoo, "Growth of Intermetallic Compounds and Brittle Fracture Behavior of Sn-Ag-Cu/ENIG Joint with Columnar Ni-P layer", J. Mater. Sci.: Mater. Electron., 32(1), 1042 (2021). https://doi.org/10.1007/s10854-020-04879-2
- Y. C. Lin, T. Y. Shih, S. K. Tien, and J. G. Duh, "Suppressing Ni-Sn-P growth in SnAgCu/Ni-P solder joints", Scr. Mater., 56(1), 49 (2007). https://doi.org/10.1016/j.scriptamat.2006.08.062
- S. O. Ha, S. S. Ha, J. B. Lee, J. W. Yoon, J. H. Park, Y. C. Chu, and S. B. Jung, "Drop Reliability Evaluation of Sn-3.0 Ag-0.5 Cu Solder Joint with OSP and ENIG Surface Finishes", J. Microelectron. Packag. Soc., 16(1), 33 (2009).