한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제21권6호
  • /
  • Pages.44-49
  • /
  • 2022
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

2.3 kW급 전기자동차 배터리팩용 냉각 장치의 열전달 특성에 관한 해석적 연구

Numerical Analysis of Heat Transfer Characteristics of Cooling System for 2.3 kW EV Battery Pack

  • 투고 : 2022.02.23
  • 심사 : 2022.03.18
  • 발행 : 2022.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The improvement in the battery performance and life using a battery thermal management system directly affects the improvement in the performance, life, and energy efficiency of electric vehicles. Therefore, this study numerically analyzed the heat exchange processes between the coolant inside the cooling plate channel and the heat generated by the battery. The cooling performance was analyzed based on the average temperature, temperature uniformity, and the maximum and minimum temperature differences of the battery. A performance difference existed depending on the coolant inlet temperature but showed the same tendency of cooling performance according to the shape of each plate's channel. Type 1 showed the best results in terms of battery temperature uniformity, which is the most important measure of battery performance; Type 2 showed the best results in terms of the average temperature of the battery; and Type 3 showed the best results in terms of the maximum and minimum temperature differences of the battery compared with that of the other cooling plates.

키워드

과제정보

본 과제는 2021년도 교육부의 재원으로 한국연구재단의 지원을 받아 수행된 지자체-대학 협력 기반 지역혁신 사업의 결과입니다. (2021RIS-003)

참고문헌

  1. Kim, T. W., Park, S. J., "Electric Vehicle Battery Thermal Management System", J. The Soc. of Air-Conditioning and Refrigerating engineers of Korea, Vol. 44, No. 11, pp. 28-41, 2015.
  2. KOR Ministry of SMEs and Startups, "SME Technology Roadmap Strategy Report Future Car 20 18-2020", pp. 9~15, pp. 449~468, 2017.
  3. Kim, M. S., "The importance of integrated thermal management system for electric vehicles", J. The Korean Soc. of Automotive Engineers, Vol. 41, No. 6, pp. 62-64, 2019.
  4. Wiriyasart, S., Hommalee, C. et al., "Thermal management system with nanofluids for electric vehicle battery cooling modules," elsevier-Case Studies in Thermal Engineering, Vol. 18, pp. 2-8, 2020.
  5. Mohsen, A., Joris J. et al., "A novel liquid cooling plate concept for thermal management of lithium-ion batteries in electric vehicles," elsevier-Energy Conversion and Management, Vol. 231, pp. 1-14, 2021.
  6. Wei, Li., Xiongbin, P. et al., "Multi-objective design optimization for mini-channel cooling battery thermal management system in an electric vehicle," wiley-Int J. Energy Res., pp. 1~13, 2019.
  7. Lee, C. H., Suh, J. S., "Numerical Analysis on the Freezing Process of Internal Water Flow in a L-Shape Pipe," J. Korean Soc. of Manuf. Process Eng., Vol. 17, No. 6, pp. 144-150, 2018. https://doi.org/10.14775/ksmpe.2018.17.6.144
  8. Park, Y. S., Suh, J. S., "Numerical Analysis of Freezing Phenomena of Water in a U-Type Tube," J. Korean Soc. of Manuf. Process Eng., Vol. 18, No. 12, pp. 52-58, 2019.