한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제21권6호
  • /
  • Pages.36-43
  • /
  • 2022
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

FC200 소재의 평면연삭 가공특성에 관한 연구

A Study on the Surface Grinding Machining Characteristics of FC200 Material

  • 양동호 (금오공과대학교 기계공학과 대학원) ;
  • 이상협 (금오공과대학교 기계공학과 대학원) ;
  • 차승환 (금오공과대학교 기계공학과 대학원) ;
  • 이종찬 (금오공과대학교 기계설계공학과)
  • Yang, Dong-Ho (Graduate School of Mechanical Engineering, Kumoh Nat. Inst. Tech.) ;
  • Lee, Sang-Hyeop (Graduate School of Mechanical Engineering, Kumoh Nat. Inst. Tech.) ;
  • Cha, Seung-Hwan (Graduate School of Mechanical Engineering, Kumoh Nat. Inst. Tech.) ;
  • Lee, Jong-Chan (School of Mechanical Engineering, Kumoh Nat. Inst. Tech.)
  • 투고 : 2022.04.12
  • 심사 : 2022.05.02
  • 발행 : 2022.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Automobile brake discs are a major part of automobiles that are directly related to driver safety, and prevention of judder and squall noise is very important. This phenomenon occurs for complex reasons such as the precision and assembly of the brake module, and the material of the brake disc. The purpose of this study is to analyze the effect of the grinding wheel's grain size on the grinding conditions when machining cast iron, the material of the brake disc, and to derive the optimal grinding conditions through this.

키워드

과제정보

본 연구는 금오공과대학교 학술연구비(2020-0120-0001)를 지원받아 수행되었습니다, 관계자 여러분께 감사드립니다.

참고문헌

  1. Lee, S. M., "A Study on the Grinding Characteristics of Surgical Implant Zirconia," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 1, pp. 72-77, 2004. https://doi.org/10.14775/ksmpe.2014.13.1.072
  2. Lee, C. S., "A Study on the Grinding Characteristics of SiC," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 1, pp. 245-250, 2006.
  3. Rhee, H. W., "Experimental Evaluation of Fatigue Threshold for SA-508 Reactor Vessel Steel," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 4, pp. 160-167, 2012.
  4. Park, J. K., Kim, I. W. and Choi, M. P., "Optimal Synthesis of Steering Mechanisms Considering Transmission Angles," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 68-75, 2012.
  5. Choi, H., "A Study on the Precision of a Machined Surface in Thrust Internal Grinding," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 73-79, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.073
  6. Choi, H., "A Study on the Comparison of Internal Plunge Grinding and Internal Thrust Grinding," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 68-73, 2016. https://doi.org/10.14775/ksmpe.2016.15.1.068
  7. Malkin, S., "Grinding Technology(Theory and Applicarions of Machining with Abrasives)," pp. 110-111.
  8. Lee, J. C., Machine tools for the 21st century, Munundang, pp. 15-329, 2004.