한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제21권3호
  • /
  • Pages.22-28
  • /
  • 2022
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

Multi Layer 다이아몬드 전착 공구의 가공특성에 관한 연구

Processing Characteristics of Multi Layer Diamond Electrodeposition Tool

  • 차승환 (금오공과대학교 기계공학과 대학원) ;
  • 양동호 (금오공과대학교 기계공학과 대학원) ;
  • 이상협 (금오공과대학교 기계공학과 대학원) ;
  • 이종찬 (금오공과대학교 기계설계공학과)
  • Cha, Seung-hwan (Graduate School of mechanical engineering, Kumoh Nat. Inst. Tech.) ;
  • Yang, Dong-ho (Graduate School of mechanical engineering, Kumoh Nat. Inst. Tech.) ;
  • Lee, Sang-hyeop (Graduate School of mechanical engineering, Kumoh Nat. Inst. Tech.) ;
  • Lee, Jong-Chan (School of Mechanical Engineering, Kumoh Nat. Inst. Tech.)
  • 투고 : 2021.12.16
  • 심사 : 2021.12.28
  • 발행 : 2022.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the semiconductor and display component industries, the use of ceramic materials, which are high-strength materials, is increasing for ensuring durability and wear resistance. Among them, alumina materials are used increasingly. Alumina materials are extremely difficult to process because of their high strength; as such, research and development in the area of mineral material processing is being promoted actively to improve their processing. In this study, the processability of an electrodeposition tool is investigated using the electrodeposition method to smoothly process alumina materials. Furthermore, processing is conducted under various processing conditions, such as spindle speed, feed speed, and depth of cut. In addition, the processing characteristics of the workpiece are analyzed based on the tooling.

키워드

과제정보

본 연구는 금오공과대학교 학술연구비(2019-104-099)를 지원받아 수행되었습니다.

참고문헌

  1. Lee, J. C., Grinding & Machining with Superabrasives, Munundang, pp. 96-100, 1998.
  2. Lee, J. C., Mechanics for the 21st century, Munundang, pp. 406-416, 2005.
  3. Kim, G. M., "study on the wearing behavior of diamond tool used to machining of ceramics Ceramics, Green body, Sintered ceramic", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 73-79, 2011.
  4. Choi, H. and Kim, C. S., "The Effects on a Side-Cut Grinding depend on the Change of the Quill Rigidity", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 5, pp. 36-41, 2013.