한국수소및신에너지학회논문집 (Transactions of the Korean hydrogen and new energy society)

  • 제33권2호
  • /
  • Pages.158-163
  • /
  • 2022
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지
DOI QR코드

DOI QR Code

Type II 고압수소저장용기의 충전과 방출에 의한 권선 거동 관찰의 기계적 방법에 관한 연구

A Study on the Mechanical Method of Observing Winding Behavior by Charging and Discharging of Type II High Pressure Hydrogen Storage Tank

  • 김승환 (금오공과대학교 대학원 기계공학과) ;
  • 한진목 (산업안전보건진흥원) ;
  • 이성희 (한국폴리텍대학 구미캠퍼스 자동화시스템과) ;
  • 정영관 (금오공과대학교 기계공학과)
  • KIM, SEUNGHWAN (Graduate School of Mechanical Engineering, Kumoh National Institute of Technology) ;
  • HAN, JINMOOK (Safety and Health Advancement Institute) ;
  • LEE, SUNGHEE (Department of Automation System, Gumi Campus of Korea Polytechnics) ;
  • JUNG, YOUNGGUAN (Department of Mechanical Engineering, Kumoh National Institute of Technology)
  • 투고 : 2022.01.27
  • 심사 : 2022.04.09
  • 발행 : 2022.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The test method on the Type II high-pressure hydrogen storage tanks made of the metal wire hoop winding is a complex and high risk. Also closeup on the tank being test is difficult. In this study, we studied a mechanical test method for a high-pressure hydrogen tanks. This method must be simple, risk-free and possible to observe the change in microscopic behavior of a metal wire on a liner. As the results, it was possible to observe the microscopic behavior on the metal wire by the mechanical test method. Also, a simple and risk-free test was possible compared to the conventional test method for high pressure hydrogen tanks.

키워드

과제정보

이 연구는 금오공과대학교 학술연구비의 지원을 받아 수행한 연구과제(202001110001)입니다.

참고문헌

  1. H. Barthelemy, M. Weber, and F. Barbier, "Hydrogen storage: recent improvements and industrial perspectives", Int. J. Hydrogen Energy, Vol. 42, No. 11, 2017, pp. 7254-7262, doi: https://doi.org/10.1016/j.ijhydene.2016.03.178.
  2. T. Lipman, "An overview of hydrogen production and storage systems with renewable hydrogen case studies", Clean Energy States Alliance, 2011. Retrieved from https://www.cesa.org/assets/2011-Files/Hydrogen-and-Fuel-Cells/CESA-Lipman-H2-prod-storage-050311.pdf.
  3. R. Moradi and K. M. Groth "Hydrogen storage and delivery: review of the state of the art technologies and risk and reliability analysis", Int. J. Hydrogen Energy, Vol. 44, No. 23, 2019, pp. 12254-12269, doi: https://doi.org/10.1016/j.ijhydene.2019.03.041.
  4. A. Zuettel, "Materials for hydrogen storage", Materials Today, Vol. 6, No. 9, 2003, pp. 24-33, doi: https://doi.org/10.1016/S1369-7021(03)00922-2.
  5. F. W. DuVall, "Cost comparisons of wet filament winding versus prepreg filament winding for type II and type IV CNG cylinders", ICCM, 12th, International Conference on Composite Materials, Paris, 1999, pp. 686. Retrieved from https://www.iccm-central.org/Proceedings/ICCM12proceedings/site/papers/pap187.pdf.
  6. B. G. Park and H. J. Lee, "FE analysis of high pressure vessels using the wire-winding technique", The Korean Society of Mechanical Engineers Academic Conference, 2018, pp. 2630-2633. Retrieved from http://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE07607815.
  7. J. M. Han, S. K. Choi, S. H. Lee, K. C. Cho, C. M. Hwang, and Y. G. Jung, "A study on the metal wire for hoop wrapping of type 2 high pressure tank", Trans Korean Hydrogen New Energy Soc, Vol. 30, No. 4, 2019, pp. 338-346, doi: https://doi.org/10.7316/KHNES.2019.30.4.338.
  8. S. S. Yim, K. M. Jang, and J. H. Lee "An experimental study on pressure-resistant performance of a re-fillable LPG cylinder", The Korean Institute of GAS, Vol. 18, No. 2, 2014, pp. 16-20, doi: https://doi.org/10.7842/kigas.2014.18.2.16.
  9. S. H. Kim, J. M. Han, and Y. G. Jung, "Theoretical study on hoop wrap of the metal wire for type 2 high pressure tank", Trans Korean Hydrogen New Energy Soc, Vol. 31, No. 2, 2020, pp. 194-201, doi: https://doi.org/10.7316/KHNES.2020.31.2.194.