DOI QR코드

DOI QR Code

Analysis of Surplus Flow in a Hydraulic System Applied to a Self-propelled Spinach Harvester

자주식 시금치 수확장치에 적용된 유압시스템의 잉여유량 분석

  • Noh, Dae Kyung (Daegu, Gyeongbuk Branch, Korea Institute of Science and Technology Information) ;
  • Lee, Dong Won (Daegu, Gyeongbuk Branch, Korea Institute of Science and Technology Information) ;
  • Lee, Jong Su (R&D center, DAESIN ACM) ;
  • Jang, Joo Sup (Department of Mechanical Engineering, Gachon University)
  • Received : 2022.01.17
  • Accepted : 2022.02.15
  • Published : 2022.03.01

Abstract

This study dealt with a self-propelled spinach harvester, which is capable of carrying out sequential harvesting work. This study aimed to find the cause of the harvester's occasional performance deterioration, which occurs in the process of simplifying the hydraulic circuit, using a multi-domain analysis model. The study was carried out in the following manner. First, a hydraulic system analysis model, which combines linear motion, rotary motion, hydrodynamic behavior, and an electrical signal, was developed through SimulationX software, specialized in multi-domain analysis. Second, a scenario for single behavior and coupled behavior was set out on an actuator basis. Third, the flow rate of the hydraulic system, which is not required for the movement of the actuator, was quantitatively analyzed. The results showed that a change in oil temperature was the cause of the harvester's occasional performance deterioration. And the higher the oil temperature, the more serious the performance deterioration, especially as the number of actuators operated simultaneously was small.

Keywords

Acknowledgement

본 연구는 한국과학기술정보연구원 「수요대응형 지역혁신 생태계 활성화 및 AI 솔루션 실용화 지원 체제 구축」 사업의 지원을 받아 진행되었습니다.

References

  1. J. S. Kim and E. K. Kim "Agricultural Autonomous Robots System for Automatic Transfer of Agricultural Harvests", Journal of the Korea Institute of Electronic Communication Sciences Vol.16, No.4, pp.749-754, 2021. https://doi.org/10.13067/JKIECS.2021.16.4.749
  2. Y. T. Ju, S. C. Kim and E. K. Kim, "Development of a Low Cost Smart Farm System for Cultivating High Value-added Specialized Crops" Journal of the Korea Institute of Electronic Communication Sciences Vol.16, No.4, pp.743-748, 2021. https://doi.org/10.13067/JKIECS.2021.16.4.743
  3. H. J. Jun et al., "Development of a Harvester for Crawled Spinach", Journal of Biosystems Engineering, Vol.30, No.4, pp.210-219, 2005. https://doi.org/10.5307/jbe.2005.30.4.210
  4. D. K. Noh, D. S. Jung, and J. S. Jang, "Developing Analysis Model for Evaluation of HCVT Materialization Possibility, and Examining It's Characteristics", Transactions of the Korean Society of Automotive Engineers, Vol.24, No.1, pp.39-46, 2016. https://doi.org/10.7467/KSAE.2016.24.1.039
  5. Y. H. Yoon and J. S. Jang, "SimulationX, Multi-domain Simulation and Modeling Tool for the Design, Analysis, and Optimization of Complex Systems", Journal of Drive and Control, Vol.9, No.1, pp.56-69, 2012. https://doi.org/10.7839/KSFC.2012.9.1.056
  6. G. H. Lee et al., "Development of Analysis Model of Pressure.Flow-controlled Swash Plate Type Pump for Evaluating Feasibility of Design", Journal of the Korea Society for Simulation, Vol.25, No.4, pp.53-63, 2016. https://doi.org/10.9709/JKSS.2016.25.4.053
  7. J. M. Jin, "Development of an Analysis Model Swash Plate Angle-the Load-flow of Swash Plate-type Hydraulic Piston Pump", Gyeongsang National University Graduate School Master's Thesis, 2017.
  8. D. K. Noh and J. S. Jang, "Shape Design Sensitivity Analysis Case of the Valves installed in the Hydraulic Driving Motor", Journal of Korea Society for Simulation, Vol.22, No.3, pp.81-87, 2013. https://doi.org/10.9709/JKSS.2013.22.3.081
  9. D. K. Noh et al., "Case of Developing Analysis Model for Recoil System for Automatic Gun", Journal of Korea Society for Simulation, Vol.24, No.4, pp.35-41, 2015. https://doi.org/10.9709/JKSS.2015.24.4.035
  10. D. K. Noh et al., "Lubricant Flow Analysis for Effective Lubrication of Tractor Forward/reverse Clutch", Heliyon, Vol.3, No.4, e00295, 2017. https://doi.org/10.1016/j.heliyon.2017.e00295
  11. D. K. Noh et al., "Development of Analysis Model and Sensitivity Analysis for High-Power Hydraulic Drifter Design", Journal of the Korea Society for Simulation, Vol.27, No.2, pp.11-24, 2018. https://doi.org/10.9709/JKSS.2018.27.2.011
  12. Fluid Power China, Technical Data.