International journal of advanced smart convergence

The Institute of Internet, Broadcasting and Communication (한국인터넷방송통신학회)
권호 표지
DOI QR코드

DOI QR Code

Verification of Stress Analysis on the Bracket of Bus Bear Chassis

  • Kim, Gyu Sung (Department of Smart Automotive Engineering, Seoil University)
  • Received : 2022.12.02
  • Accepted : 2022.12.07
  • Published : 2022.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Structural stress analysis is performed to confirm the safety of the structures before the construction, and stress analysis is performed to evaluate the safety of various components before the ship or vehicle corresponding to the moving structure is manufactured. In this case, the stress analysis work is performed using the stress analysis software of each company. The results of the stress analysis based on the boundary conditions of the applied loads are analyzed to evaluate the safety of the structure, but the results are difficult to verify because most of the stress analysis software possessed by each company is one. In this paper, we were performed the stress analysis of the bracket applied to the bare chassis of the 30-passenger bus under development is performed by HYPERMESH. In order to verify this, the stress analysis is performed using ANSA/META under the same boundary condition. The stress analysis results of ANSA/META and HYPERMESH showed that they had the same stress distribution and the maximum stress occurred at the same location. Taken together, the results of stress analysis using HYPERMESH were reliable.

Keywords

Acknowledgement

This work was supported by Seoil University Academic Research Fund in 2022.

References

  1. Wan-Mug Choi, "Safety Evaluate of Brackets for Bare Chassis of a 30-seated Bus," International Journal of Advanced Smart Convergence Vol.11 No.3 215-221, DOI: http://dx.doi.org/10.7236/IJASC.2022.11.3.215, 2022
  2. Yang Seung Bok, "Boundary Condition for Bare Chassis Brackets of the Commercial Vehicle," International Journal of Advanced Smart Convergence Vol.11 No.1 94-100, DOI: http://dx.doi.org/10.7236/IJASC.2022.11.1.94, 2022
  3. D. H. Lee & J. U. Cho, "Convergence Study on Damage of the Bonded Part at TDCB Structure with the Laminate Angle Manufactured with CFRP," Journal of the Korea Convergence Society, 9(12), 175-180. DOI:http://dx.doi.org/10.15207/JKCS.2018.9.12.175, 2018
  4. Y. K. Park & B. G. Lee, "A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining," Journal of the Korea Convergence Society, 9(5), 145-150. DOI:http://dx.doi.org/10.15207/JKCS.2018.9.5.145, 2018
  5. Jin-soo Park, Hyun-jin Park, Byung-ki Oh, "Optimization of Bearing Bracket for Automotive Drive Shaft," Fall Conference Proceedings of The Korean Society Of Automotive Engineers, pp. 408-409, 2018. 11
  6. Jong-chan Kim, Hyun-gu Ji, "Bracket Topology Optimization for Robust Design in Concept Design," Fall Conference Proceedings of The Korean Society Of Automotive Engineers, pp. 810-810, 2018. 11
  7. Y. T. Oh, "Study on the Structural Analysis of SCARA Industrial Robot," Journal of the Korean Society of Mechanical Technology, 19(6), 866-871. DOI: http://dx.doi.org/10.17958/ksmt.19.6.201712.866, 2017
  8. J. H. Lee & J. U. Cho, "A Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis," Journal of the Korea Convergence Society, 6(4), 99-105. DOI:http://dx.doi.org/10.15207/jkcs.2015.6.4.099, 2015
  9. Hong-suk Chang, Jung-sup Lee, "Design of chassis mounting brackets using optimization method," Spring conferences Proceedings of The Korean Society Of Automotive Engineers, pp. 1185-1190, 2012. 5
  10. B. Hwang, H. Lee, J. Jang and I. Joo, "A Study of Stress Distribution of a pulley for automobile at static load condition," Fall Conference Proceedings of Korean Society of Automotive Engineers, Vol.2, pp.1180~1184, 2003.