과제정보
This work was supported by the Japan Grant-in-Aid for Scientific Research (B) (Grand No. 19H02645) and the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT) (Grand No. 1081782).
참고문헌
- C.M. Patil, S.G. Kandlikar, Pool boiling enhancement through microporous coatings selectively electrodeposited on fin tops of open microchannels, Int. J. Heat Mass Tran. 79 (2014) 816-828. https://doi.org/10.1016/j.ijheatmasstransfer.2014.08.063
- T. Wu, P.S. Lee, J. Mathew, S.R. Lu, Experimental study of ageing effect in pool boiling heat transfer. 20th electronics packaging Technology conference (EPTC), IEEE (2018) 477-484.
- N.I. Kolev, How accurately can we predict nucleate boiling? Exp. Therm. Fluid Sci. 10 (3) (1995) 370-378. https://doi.org/10.1016/0894-1777(94)00097-R
- B.R. Sehgal, Nuclear Safety in Light Water Reactors: Severe Accident Phenomenology, second ed., Elsevier, San Diego, 2012.
- C.Y. Lee, T.H. Chun, W. Kee In, Critical heat flux of oxidized zircaloy surface in saturated water pool boiling, J. Nucl. Sci. Technol. 52 (4) (2015) 596-606.
- S.G. Kandlikar, A theoretical model to predict pool boiling CHF incorporating effects of contact angle and orientation, J. Heat Tran. 123 (2001) 1071-1079. https://doi.org/10.1115/1.1409265
- K. Wang, N. Erkan, H. Gong, K. Okamoto, Effects of carbon steel surface oxidation on critical heat flux in downward-face pool boiling, Int. J. Heat Mass Tran. 136 (2019) 470-485. https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.020
- K. Wang, N. Erkan, K. Okamoto, A study on the effect of oxidation on critical heat flux in flow boiling with downward-faced carbon steel, Int. J. Heat Mass Tran. 147 (2020) 118966. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118966
- H. O'Hanley, C. Coyle, J. Buongiorno, T. McKrell, L.-W. Hu, M. Rubner, R. Cohen, Separate effects of surface roughness, wettability, and porosity on the boiling critical heat flux, Appl. Phys. Lett. 103 (2013), 024102. https://doi.org/10.1063/1.4813450
- J. Kim, S. Jun, R. Laksnarain, S.M. You, Effect of surface roughness on pool boiling heat transfer at a heated surface having moderate wettability, Int. J. Heat Mass Tran. 101 (2016) 992-1002. https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.067
- R. Braun, Warmeubergang beim Blasensieden an der AuBenseite von geschmirgelten und sandgestrahlten Rohren aus Kupfer, Messing und Edelstahl, Doctor dissertation, University Fridericiana Karlsruhe, 1992.
- X. Zhou, K. Bier, Influence of the heat conduction properties of the wall material and of the wall thickness on pool boiling heat transfer, in: EUROTHERM Seminar No. 48: Pool Boiling 2, Paderborn, Germany, 1996.
- U. Magrini, E. Nannei, On the influence of the thickness and thermal properties of heating walls on the heat transfer coefficients in nucleate pool boiling, J. Trans ASME Heat Transfer (1975) 173-178.
- V.A. Grigoriev, V.V. Klimenko, Y.M. Pavlov, E.V. Ametistov, Influence of Some Heating Surface Properties on the Critical Heat Flux in Cryogenic Liquids Boiling, Begel House Inc, 1978.
- J.W. Westwater, J.J. Hwalek, M.E. Irving, Suggested standard method for obtaining boiling curves by quenching, Ind. Eng. Chem. Fundam. 25 (4) (1986) 685-692. https://doi.org/10.1021/i100024a034
- Y. Mei, Y. Shao, S. Gong, Y. Zhu, H. Gu, Effects of surface orientation and heater material on heat transfer coefficient and critical heat flux of nucleate boiling, Int. J. Heat Mass Tran. 121 (2018) 632-640. https://doi.org/10.1016/j.ijheatmasstransfer.2018.01.020
- C. Bombardieri, C. Manfletti, Influence of wall material on nucleate pool boiling of liquid nitrogen, Int. J. Heat Mass Tran. 94 (2016) 1-8. https://doi.org/10.1016/j.ijheatmasstransfer.2015.10.049
- J. Lee, S.H. Chang, An experimental study on CHF in pool boiling system with SA508 test heater under atmospheric pressure, Nucl. Eng. Des. 250 (2012) 720-724. https://doi.org/10.1016/j.nucengdes.2012.05.024
- H.M. Park, Y.H. Jeong, S. Heo, Effect of heater material and coolant additives on CHF for a downward facing curved surface, Nucl. Eng. Des. 278 (2014) 344-351. https://doi.org/10.1016/j.nucengdes.2014.07.019
- D.H. Kam, Y.J. Choi, Y.H. Jeong, CHF experiment with downward-facing carbon and stainless steel plates under pressurized conditions, Int. J. Heat Mass Tran. 125 (2018) 670-680. https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.026
- D.H. Kam, Y.J. Choi, Y.H. Jeong, H.C. No, Heat transfer performance of downward-facing carbon and stainless steel surfaces, Int. Commun. Heat Mass Tran. 113 (2020) 104503. https://doi.org/10.1016/j.icheatmasstransfer.2020.104503
- L. Liao, R. Bao, Z. Liu, Compositive effects of orientation and contact angle on critical heat flux in pool boiling of water, Heat Mass Tran. 44 (2008) 1447-1453. https://doi.org/10.1007/s00231-008-0384-6
- M.S. El-Genk, A.F. Ali, Enhanced nucleate boiling on copper micro-porous surfaces, Int. J. Multiphas. Flow 36 (2010) 780-792. https://doi.org/10.1016/j.ijmultiphaseflow.2010.06.003
- K. Wang, H. Gong, L. Wang, N. Erkan, K. Okamoto, Effects of a porous honeycomb structure on critical heat flux in downward-facing saturated pool boiling, Appl. Therm. Eng. 166 (2020) 115036.
- I. Golobic, A.E. Bergles, Effects of heater-side factors on the saturated pool boiling critical heat flux, Exp. Therm. Fluid Sci. 15 (1) (1997) 43-51. https://doi.org/10.1016/S0894-1777(96)00170-7
- R.J. Moffat, Describing the uncertainties in experimental results, Exp. Therm. Fluid Sci. 1 (1) (1988) 3-17. https://doi.org/10.1016/0894-1777(88)90043-X
- Y. Katto, C. Kurata, Critical heat flux of saturated convective boiling on uniformly heated plates in a parallel flow, Int. J. Multiphas. Flow 6 (6) (1980) 575-582. https://doi.org/10.1016/0301-9322(80)90052-X
- L. Wang, A.R. Khan, N. Erkan, H. Gong, K. Okamoto, Critical heat flux enhancement on a downward face using porous honeycomb plate in saturated flow boiling, Int. J. Heat Mass Tran. 109 (2017) 454-461. https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.113
- D.H. Kam, Y.J. Choi, Y.H. Jeong, Critical heat flux on downward-facing carbon steel flat plates under atmospheric condition, Exp. Therm. Fluid Sci. 90 (2018) 22-27. https://doi.org/10.1016/j.expthermflusci.2017.08.028
- H.S. Ahn, C. Lee, H. Kim, et al., Pool boiling CHF enhancement by micro/ nanoscale modification of zircaloy-4 surface, Nucl. Eng. Des. 240 (10) (2010) 3350-3360. https://doi.org/10.1016/j.nucengdes.2010.07.006
- R.F. Gaertner, Photographic study of nucleate pool boiling on a horizontal surface, J. Heat Tran. 87 (1965) 17-27. https://doi.org/10.1115/1.3689038
- M.C. Vlachou, J.S. Lioumbas, K. David, D. Chasapis, T.D. Karapantsios, Effect of channel height and mass flux on highly subcooled horizontal flow boiling, Exp. Therm. Fluid Sci. 83 (2017) 157-168. https://doi.org/10.1016/j.expthermflusci.2017.01.001
- H.H. Son, U. Jeong, G.H. Seo, S.J. Kim, Oxidation effect on the pool boiling critical heat flux of the carbon steel substrates, Int. J. Heat Mass Tran. 93 (2016) 1008-1019. https://doi.org/10.1016/j.ijheatmasstransfer.2015.10.047
- K. Wang, N. Erkan, K. Okamoto, Oxidation effect of copper on the downwardfacing flow boiling CHF under atmospheric condition, Int. J. Heat Mass Tran. 156 (2020) 119866. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119866
- https://en.wikipedia.org/wiki/Mohs_scale_of_mineral_hardness.
- W.T. Ji, P.F. Zhao, C.Y. Zhao, J. Ding, W.Q. Tao, Pool boiling heat transfer of water and nanofluid outside the surface with higher roughness and different wettability, Nanoscale Microscale Thermophys. Eng. (2018) 296-323. https://doi.org/10.1080/15567265.2018.1497110
- N. Kim, H.H. Son, S.J. Kim, Oxidation effect on pool boiling critical heat flux enhancement of Cr-coated surface for accident-tolerant fuel cladding application, Int. J. Heat Mass Tran. 144 (2019) 118655. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118655
- J. Kim, S. Jun, J. Lee, S.M. You, Effect of surface roughness on pool boiling heat transfer of water on a superhydrophilic aluminum surface, J. Heat Transfer 139 (1) (2017) 101501. https://doi.org/10.1115/1.4036599
- J. Min, Webb, Long-Term Wetting and Corrosion Characteristics of Hot Water Treated Aluminum and Copper Fin Stocks, Int. J. Refrig 25 (8) (2002) 1054-1061. https://doi.org/10.1016/S0140-7007(02)00010-5