References
- Mohamed, S. S., Samuel, A. M. Doty, H. W. and et al., Inter. J. Metalcast, 14(1) (2020) 25. https://doi.org/10.1007/s40962-019-00342-z
- J.G. Kaufman and E.L. Rooy, "Aluminum Alloy Castings", ASM International, OH (2004).
- L. Dobrzanski, R. Maniara, M. Krupinski, and J. Sokolowski, J. Achives Mater. Manuf. Eng., 24 (2007) 51.
- G. Mrowka-Nowotnik, J. Sieniawski and M. Wierzbinska, Archives Mater. Sci. Eng., 28(2) (2007) 69.
- C. Caceres, M. Djurdjevic, T. Stockwell and J. Sokolowski, Scr. Mater., 42(5) (1999) 631.
- Li, S. and Apelian D., Inter. J. Metalcast, 5(1) (2011) 23. https://doi.org/10.1007/bf03355505
- Li, S., Apelian, D. and Sadayappan, K. Inter. J. Metalcast, 6(1) (2012) 51.
- Fiorese, E., Bonollo, F., Timelli, G. and et al., Inter. J. Metalcast, 9(1) (2015) 55. https://doi.org/10.1007/bf03355602
- B. K. Kang and I. Sohn, Metall. Mater. Trans., 49 (2018) 5137. https://doi.org/10.1007/s11661-018-4786-x
- D. Cheng, L. Zhang, G. Wu, J. Mao and W. Liu, J. Mater. Res., 31(22) (2016) 1. https://doi.org/10.1557/jmr.2016.3
- Chen, Y., Liu, Z., Liu, S. and et al., Inter. J. Metalcast, 15(1) (2021) 130. https://doi.org/10.1007/s40962-020-00438-x
- Y. Li, Z. R. Zhang, Z. Y. Zhao, H. X. Li, L. Katgerman and J. S. Zhang, Metall. Mater. Trans. A, 50(8) (2019) 3603. https://doi.org/10.1007/s11661-019-05268-z
- A. B. Phillion, S. L. Cockcroft, and P. D. Lee, Modelling Simul. Mater. Sci. Eng., 17(5) (2009).
- Clyne, T. W. and Davies, G. J., Proceedings of the Conference on Solidification and Casting of metals, Metals Society, London (1979) 274.
- Eskin, D.G., Suyitno and Katgerman, L., Prog. Mater. Sci., 49(5) (2004) 629. https://doi.org/10.1016/S0079-6425(03)00037-9
- Viano, D., St. John, D., Grandfield, J. and Caceres, C., Light Met., (2005) 895.
- Davidson, C., Viano, D., Lu, L. St. John, D., Int. J. Cast Met. Res., 19 (2006) 59. https://doi.org/10.1179/136404606225023291
- S. Instone, D. StJohn, and J. Grandfield, Int. J. Cast. Met. Res., 12(6) (2000) 441. https://doi.org/10.1080/13640461.2000.11819381
- H.J. Kim, J. Korea Foundry Society, 34(4) (2014) 136. https://doi.org/10.7777/JKFS.2014.34.4.136
- Nasresfahani, M.R. and Niroumand, B., Inter. J. Metalcast, 14(2) (2020) 538.. https://doi.org/10.1007/s40962-019-00378-1
- Uludag, M., Cetin, R., Dispinar, D and et al., Inter. J. Metalcast, 12(3) (2018) 589. https://doi.org/10.1007/s40962-017-0197-9
- L. Backerud, G. Chai and J. Tamminen, "Foundry alloys - Vol.2", Skanaluminium, Norway (1990).
- B. Akyuz, Advances in Science and Technology, 10(31) (2017) 51.
- A. Meetsma, J.L. De Boer and S. Van Smaalen., J. Sol. State Chem., 83(2) (1989) 370. https://doi.org/10.1016/0022-4596(89)90188-6
- M. Djurdjevic, W. Kasprzak, C. Kierkus, W. Kierkus and J. Sokolowski, AFS Trans., 16, (2001), 1.
- M. Moustafa, F. Samuel, H. Doty and S. Valtierra, Inter. J. Cast. Metal. Res., 14(4) (2002) 235. https://doi.org/10.1080/13640461.2002.11819442
- M.B. Djurdjevic, J. Sokolowski, W.T. Kierkus, and G.E. Byczynski, Mater. Sci. Forum Trans. Tech. Publ., 539-543 (2007) 299. https://doi.org/10.4028/www.scientific.net/MSF.539-543.299
- Mehta, M. C., Mandal, D. & Chaudhury, S. K., Inter. J. Metalcast, 14(4) (2020) 987. https://doi.org/10.1007/s40962-020-00408-3
- Zeng, X., Ferguson, C., Sadayappan, K and et al., Inter. J. Metalcast, 12(3) (2018) 457. https://doi.org/10.1007/s40962-018-0227-2
- N. L. Veldman, A.K. Dahle, D.H. StJohn and L. Arnberg, Metall. and Mater. Trans. A, 32(1) (2001) 147. https://doi.org/10.1007/s11661-001-0110-1
- J. Williams, and A. Singer, J. Inst. Metal., 96 (1968) 5.
- E. H. Lee, and P.S. Symonds, Plasticity; proceedings of the second symposium on naval structural mechanics, elsevier, amsterdam (2013).
- E. O. Orowan, Fundamentals of brittle behavior of Metals, Murray WM. (1950).
- D. Liu, H.V. Atkinson and H. Jones, Acta Mater., 53(14) (2005) 3807. https://doi.org/10.1016/j.actamat.2005.04.028
- M.A.M. Arif, M.Z. Omar, Z. Sajuri, and M.S. Salleh, Trans. Non. Ferr. Metal. Soc. China, 30(2) (2020) 275. https://doi.org/10.1016/S1003-6326(20)65212-8
- M.S. Salleh, M.Z. Omar, J. Syarif, K.S. Alhawari, and M.N. Mohammed, Appl. Mech. and Mater., 548 (2014) 237. https://doi.org/10.4028/www.scientific.net/AMM.548-549.237
- J. Campbell, "Castings 2nd ed.", Butterworth-Heinemann Ltd., oxford (2003).
- Flemings, M.C., Solidification Processing. Metallurgical Transactions, 5 (1974) 2121-2134. https://doi.org/10.1007/BF02643923
- A. B. Phillion, S. L. Cockcroft and P. D. Lee, Modelling Simul. Mater. Sci. Eng., 17(5) (2009).
- Clyne, T.W. and G.J. Davies, Solidification and casting of metals. Proc. Conf. on Solidifiation and Casting Metals, (1979) 275.
- Pellini, W., Foundry, 80 (1952) 125.
- Dodd, R., Foundry Trade Journal, 101 (1956) 1.
- S. A. Metz, and M.C. Flemings, "Fundamental Study of Hot Tearing", American Foundrymen's Society, IL (1970).
- N. Tenekedjiev, H. Mulazimoglu, B. Closset and J. Gruzleski, American Foundrymen's Society, IL (1995) 32.