Acknowledgement
This work was supported by the Korea Medical Device Development Fund grant funded by the Korea government (the Ministry of Science and ICT, the Ministry of Trade, Industry and Energy, the Ministry of Health & Welfare, the Ministry of Food and Drug Safety) (Project Number: 1711138068, KMDF_PR_20200901_0063). Also, it was supported by the KETEP as Human Resources Development Programs (Grant No. 20194010201800).
References
- S. Hahn, Y. Kim, D. K. Park, K. Kim, J. Voccio, J. Bascunan, and Y. Iwasa, "No-Insulation multi-width winding technique for high temperature superconducting magnet," Appl. Phys. Lett, vol. 103, pp. 173511, 2013. https://doi.org/10.1063/1.4826217
- S. Hahn, Y. Kim, J. Song, J. Voccio, J. Ling, J. Bascunan, and Y. Iwasa, "A 78-mm/7-T Multi-Width No-Insulation ReBCO Magnet: Key Concept and Magnet Design," IEEE Trans. on Appl. Supercond., vol. 24, no. 3, pp. 4602705, 2014.
- J. Bascunan, S. Hahn, Y. Kim, and Y. Iwasa, "A new high-temperature superconducting (HTS) 700-MHz insert magnet for a 1.3-GHz LTS/HTS NMR magnet," IEEE Trans. Appl. Supercond., vol. 23, no. 3, pp. 4400304, 2013. https://doi.org/10.1109/TASC.2012.2234812
- B. J. Parkinson, R. Slade, M. J. D. Mallet, and V. Chamritski, "Development of a cryogen free 1.5 T YBCO HTS magnet for MRI," IEEE Trans. Appl. Supercond., vol. 23, no. 3, pp. 4400405, 2013. https://doi.org/10.1109/TASC.2012.2235893
- Y. G. Kim, S. Hahn, K. Kim, D. Yang, and H. G. Lee, "Design consideration and optimization procedure for a no-insulation mutlwidth REBCO magnet," Curr. Appl. Phys., vol. 15, no. 10, pp. 1134- 1138, 2015. https://doi.org/10.1016/j.cap.2015.06.024
- S. Noguchi, M. Yamashita, H. Yamashita, and A. Ishiyama, "An Optimal Design Method for Superconducting Magnets Using HTS Tape," IEEE Trans. on Appl. Supercond., vol. 11, no. 1, pp. 2308- 2311, 2001. https://doi.org/10.1109/77.920322
- T. Tadic and B. Fallone, "Design and Optimization of superconducting MRI magnet Systems with magnetic materials," IEEE Trans. on Appl. Supercond., vol. 22, no. 2, pp. 4400107, 2012. https://doi.org/10.1109/TASC.2012.2183871
- M. C. Ahn, H. Yang, K. Kim, J. Y. Jang, S. Lee, and S. Hahn, "Optimal Design Methodology of Multi-Width HTS Magnet for minimum Wire Consumption," IEEE Trans. Appl. Supercond., vol. 28, no. 3, pp. 4602905, 2018.
- J Souc, E. Pardo, M Vojenciak, and F. Gomory, "Theoretical and experimental study of AC loss in high temperature superconductor single pancake coils," Supercond. Sci. Technol., vol. 22, no. 1, pp. 015006, 2008. https://doi.org/10.1088/0953-2048/22/1/015006
- F.Gomory, "Improvement of the self-field critical current of a high-Tc superconducting tape by the edge cover from soft ferromagnetic material," Appl. Phys. Lett., vol. 89, pp. 072506, 2006. https://doi.org/10.1063/1.2337109